Yorkville Sound NX20 - Manual

w w w . y o r k v i l l e . c o m

Yorkville Sound

550 Granite Court

Pickering, Ontario

L1W-3Y8 CANADA

Canada

Voice: (905) 837-8481

Fax: (905) 837-8746

Yorkville Sound Inc.

4625 Witmer Industrial Estate

Niagara Falls, New York

14305 USA

U.S.A.

Voice: (716) 297-2920

Fax: (716) 297-3689

P

rin

te

d

in

C

an

ad

a

The NX12, NX20 and NX520p are a few of the many Yorkville speaker enclo-

sures equipped with flying hardware for overhead suspension applications. These

hardware kits have been specifically designed to expand the enclosure’s already

advanced mounting capabilities.

IMPORTANT!! THE RIGGING OF LOUDSPEAKER SYSTEMS IS AN EXTREMELY SERIOUS MATTER.

OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, INCLUDING (BUT NOT LIMITED TO)

CALCULATING WORKING LOAD LIMITS, HARDWARE INSTALLATION, AND PERIODIC SAFETY

INSPECTION OF ALL HARDWARE AND CABINETRY. IF YOU LACK THESE QUALIFICATIONS,

DO NOT ATTEMPT THE INSTALLATION YOURSELF, BUT INSTEAD USE A PROFESSIONAL

STRUCTURAL RIGGER. IMPROPER INSTALLATION CAN RESULT IN BODILY INJURY OR DEATH.

CONSULT A STRUCTURAL ENGINEER TO CALCULATE ADDED LOADS FOR A BUILDING.

STRUCTURAL REINFORCEMENT MAY BE NECESSARY TO INSURE A SAFE INSTALLATION.

The NXF100 System

The NXF100 installation system has been developed to expand the NX12, NX20

and the NX520p enclosure’s capabilities to be mounted in more ways than a stan-

dard shackle and cables allow. It’s a unique U-bracket system that attaches to the

NX enclosures’ integrated flypoints. Multiple flypoints on the brackets ensure the rig

can be flown at virtually any angle. It can be secured to the truss or roofing system

with almost any typical flyware currently available. The NXF100 is easily mounted to

the top of the enclosure as well as the bottom standmount adapter. Additionally, the

cabinet can be angled up to 45 degrees across the horizon-

tal plane within the NXF100 housing.

Wall Mounting (NXF105)

For wall mounting applications,

the NXF100 can be attached to

an optional NXF105 wall-mount

bracket. This bracket enables the

NX enclosure to achieve angles up

to 30 degrees forward while being

securely attached to a wall or pillar.

Flying Arrays (NXF110)

Using the optional NXF110 Flying

Array Adapter perfect 60 degree

spacing between multiple enclosures,

in a circular array is achieved. The NXF110 joins

the NXF100 U-Brackets together safely and securely

and is extremely simple to install for flying two enclosure or

up to six cabinets in the circular arrays.

NX Flyware System Components

NXF100 - Steel U-Bracket and flying assembly

NXF105 - Wall Mounting Bracket ( - to attach NXF100 assembly to wall or piller)

NXF110 - Array Link Assembly ( - to properly array and space out multiple NXF100

Flying assemblies)

The ideal center cluster array is easily assembled using three NXF100 U brackets,

and four NXF110s. (Shackles and cables not included.)

Yorkville NX Flyware

1

Manual-Owners-NXF100-1v4.pdf