Yamaha RX-V771 - Manual
Yamaha RX-V771 Amplifier – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – A D V A N C E D S E T U P; Caution
- Page 3 – a. Power on the AV receiver and press the; ON SCREEN; button on the remote control.; Check the updated fi rmware version
- Page 4 – STRAIGHT; PROGRAM; F I R M U P D A T E U S B; Enter the ADVANCED SETUP mode
- Page 5 – INFO; U P D A T E U N A V A I L; MAIN ZONE; Start fi rmware update; U P D A T E S U C C E S S; Troubleshooting CASE 2
- Page 6 – Troubleshooting; Receiver doesn’t power up after the update.; U S B U P D A T E; “UPDATE FAIL” appeared during the update; U S B U P D A T E
FIRMWARE UPDATING PROCEDURE
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the
Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by
Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore proper
operation will not be covered under the Yamaha Limited Warranty.
Choose from the following 2 methods to update to the latest fi rmware.
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
Click here for
(A USB thumb drive is required)
In case of error, see the
section
1
RX-V771
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Firmware Update Through the Internet Requirement: Internet connection Your receiver is connected to the Internet if you can receive Internet radio stations.(See owner’s manual for details) While pressing the STRAIGHT button, press the MAIN ZONE button and keep STRAIGHT button pressed until “ A D V A...
ON SCREEN button a. Power on the AV receiver and press the ON SCREEN button on the remote control. b. Select “Information” > “System”. c. Confirm that the firmware version is updated to the latest version. Check the updated fi rmware version 5 Congratulations! You have completed the firmware upda...
Firmware Update by USB Requirement: USB thumb drive, with enough free space to store over 25MB.(File system with FAT16 or FAT32 format) Firmware file provided by YAMAHA,”RXV771-xxxx.bin”. Prepare USB thumb drive for the update Insert the USB thumb drive Power off the receiver (Standby mode) 1 3 2 Do...
