Yamaha RX-V567 - Manual
Yamaha RX-V567 Amplifier – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Instructions for Firmware Update:; STEP1 CREATE UPDATE DISC
- Page 3 – STEP3 ENTER FIRMWARE UPDATE MODE; “CDDA Upgrader”; STEP4 START; “Found Header”; IN CASE OF ERROR; “Update Success”; INFO
- Page 5 – Case2 Other unintended error occurred.
Firmware Update Procedure for RX-V467/RX-V567
Page.1 of 5
Sep
September
, 2010
Subject: RX-V467/RX-V567 Firmware Update Version
F
01
8
(Including HTR-4063/HTR-5063)
Yamaha is pleased to offer the following firmware update to ensure the best possible
performance and features for your Yamaha RX-V467/RX-V567 AV Receiver. This
firmware adds 3D video pass-through capability for the HDMI connections
and improves
stability with 3D signals from DirecTV set-top boxes.
Requirements:
A personal computer capable of burning an audio CD
BD/DVD/CD player* with digital audio connection
(Optical or Coaxial, not HDMI)
*Note
CD PLAYER IS PREFERRED.
Some DVD players use digital filters, which affects the output signal of the
devices. This firmware update may not work with DVD players which use these
digital filters. CD players usually do not use these filters.
CHECK THE UNIT’S FIRMWARE VERSION PRIOR TO THIS UPDATE
The firmware version consists of a letter followed by three numbers [ex. “
F
01
8
”].
If the three numbers in the firmware version are 01
8
or higher, you
DO NOT
need to
perform this update.
How to check your firmware version:
Press and hold the
[STRAIGHT]
button on the front panel and keep it pressed while you
press the
[STANDBY/ON]
button. Once the front panel displays
"ADVANCED SETUP"
,
release the
[STRAIGHT]
button. Then, press and hold the
[TONE CONTROL]
button for
about 3 seconds until front panel display shows the firmware version.
The following pages contain the firmware update instructions for Yamaha AV receivers
RX-V467/V567. The outline of the update is as follows:
1. Create an update disc (Audio CD)
2. Connect digital audio with CD, DVD or BD player
3. Enter firmware update mode
4. Play the update disc (Reprogramming)
5. Confirm update firmware version
< IMPORTANT NOTICE >
Do not attempt to update your Yamaha receiver using any other data file except those provided
directly from the Yamaha website.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required
to restore proper operation will not be covered under the Yamaha Limited Warranty.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Yamaha RX-V567
Summary
Firmware Update Procedure for RX-V467/RX-V567 Page.2 of 5 Instructions for Firmware Update: STEP1 CREATE UPDATE DISC Download the firmware from YAMAHA website. Unzip and burn the WAV file onto CD-R/RW as an Audio-CD. This will be your update disc. If you need instructions on creating this firmware u...
Firmware Update Procedure for RX-V467/RX-V567 Page.3 of 5 STEP3 ENTER FIRMWARE UPDATE MODE Plug the AC power cable of the AV receiver. Press and hold the [STRAIGHT] button on the front panel and keep it pressed while you press the [STANDBY/ON] button. Once the front panel displays "Advance Setup...
Firmware Update Procedure for RX-V467/RX-V567 Page.5 of 5 IN CASE OF ERROR Case1 Display on the receiver “CDDA Upgrader” doesn’t change after playing the BD/DVD/CD player. Check digital cable wiring. Only optical or coaxial connection can be used for this update. HDMI connection will not work. C...
