Yamaha RX-S601D- Manual

Yamaha RX-S601D

Yamaha RX-S601D– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
Page: / 6

Table of Contents:

  • Page 2 – Firmware Update Through the Internet; ADVANCED SETUP; Caution; UPDATE SUCCESS
  • Page 3 – Check the updated firmware version
  • Page 4 – Insert the USB thumb drive; Select firmware update from the menu
  • Page 5 – Start firmware update
  • Page 6 – Receiver doesn’t power up after the update.; USB UPDATE; Troubleshooting; UPDATE
Loading the manual

1

Choose from the following 2 methods to update to the latest firmware.

Click here for

Firmware Update Through the Internet

(Connection to the Internet is required)

Click here for

Firmware Update by USB

(A USB thumb drive is required)

In case of error, see the

Troubleshooting

section

IMPORTANT NOTICE

Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the
Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by
Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to restore proper
operation will not be covered under the Yamaha Limited Warranty.

FIRMWARE UPDATING PROCEDURE

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Firmware Update Through the Internet; ADVANCED SETUP; Caution; UPDATE SUCCESS

2 UPDATE SUCCESS POWER OFF! PLEASE... RX-S601 Firmware Update Through the Internet Requirement: Internet connection Your receiver is connected to the Internet if you can receive Internet radio stations. (See owner’s manual for details) 1 Power off the receiver (Standby mode) 2 Enter the ADVANCED SET...

Page 3 - Check the updated firmware version

3 5 Check the updated firmware version a. Power on the AV receiver and press the SETUP key on the remote control. b. Select “Network” > “Network Update”. c. Confirm that the firmware version is updated to the latest version. SETUP key Congratulations! You have completed the firmware update. Your ...

Page 4 - Insert the USB thumb drive; Select firmware update from the menu

4 RX-S601 Firmware Update by USB Requirement: USB thumb drive, with enough free space to store over 25MB. (File system with FAT16 or FAT32 format) Firmware file provided by YAMAHA, “R03xx-xxxx.bin”. 1 Prepare USB thumb drive for the update Download the firmware, unzip and copy “R03xx-xxxx.bin” into ...

Other Yamaha Models