Yamaha R1- User Manual
Yamaha R1– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MXL for Yamaha R1 - R6
- Page 3 – CODE DESCRIPTION
- Page 4 – DIAGNOSTIC MODE; HOW TO ENTER INTO DIAGNOSTIC MODE.; PAGE DESCRIPTION
- Page 6 – STOCK ECU; PAGE DESCRIPTION VALUE
- Page 7 – KIT ECU; PAGE
MXL
YAMAHA
R1 K4 K5 K6
YAMAHA R6 K4 K5
MXL for Yamaha R1 R6 is a product designed to offer the maximum amount of information with the minimum effort
for the installation. It directly connects to the bike Engine Control Unit, in order to get , without any extra sensor, the following data:
-
rpm
-
speed
-
water temperature
-
air temperature
-
From the bike sensors, it receives:
-
oil pressure status
-
fuel level status
-
turning lights signal
-
Hi Beam signal
-
Neutral signal
-
Battery level
Besides, MXL offers the possibility to manage 5 freely configurable channels. The configuration can be executed by our Race
Studio software, using a normal PC.
MXL for Yamaha can be used in three different modes::
1.
Running mode: normal mode: shows and, in case of MXL Pista, records, the engine data and the diagnosis codes.
2.
Setting mode: by this mode, it is possible to set some engine parameters. In Setting Mode it is possible to modify the
engine mapping.
3.
Diagnostic Mode: by this mode, we can manage problems and errors in the Engine Control Unit.
www.aim-sportline.com
MXL for Yamaha R1 - R6
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
POWER ON MXL for Yamaha R1/R6 can be installed on both stock bikes and on bikes powered by original YEK kits Turning the power ON, MXL automatically recognizes which ECU tis installed in the bike, working in two different ways. The two ECUs that can be managed are: 1. STOCK ECU STD ECU 2. YEC KIT KI...
In Running Mode MXL shows the data in accordance to the following layout: It is possible to change layout, information and alarm position by Race Studio Software Configuration Menu. When you turn the power on the first time, MXL starts “Gear calibration feature” and it will show “RUNNING GEAR CAL“. ...
In case Diagnostic Feature reads more than one error, the YAMAHA ERR item will show the different codes sequentially YAMAHA_ERR is not shown in the default configuration. You can anyway change the configuration using race Studio System Manager . DIAGNOSTIC MODE Diagnostic Mode let us monitor the pro...
