Yamaha QR10 - User Manual

Table of Contents:

• Page 2 – Bescheinigung des Importeurs; in Übereinstimmung mit den Bestimmungen der; Name des Importeurs
• Page 4 – Contents; ii
• Page 5 – Precautions
• Page 6 – About This Manual; that may occur due to improper operation or set up.
• Page 7 – Features; Here are a few of the QR10’s most important features ...; Applications; A Super Practice Tool
• Page 8 – The QR10’s AWM (Advanced Wave Memory) tone generator is in no way a; PATTERN MODE; QR10 System Overview; Ending
• Page 9 – Power Supply; Using a Power Adaptor; Using Batteries; Open Battery Compartment Cover; When to Replace the Batteries
• Page 10 – Setting Up Your System; The Connectors; PHONES Jack; OUTPUT Jack; MIDI IN & OUT Connectors
• Page 11 – Audio Connections; Setting the Input Gain
• Page 12 – : The QR10 Controls; POWER Switch
• Page 14 – VOLUME Control; The VOLUME control adjusts the volume of the sound; Microphone; When no source is connected to the rear-panel INPUT; Speaker; The QR10’s built-in amplifier and speaker system
• Page 15 – Play the Demo; demonstration for a sample of what the QR10 can do.
• Page 16 – different preset or user patterns.; Selecting & Playing a Pattern; Select the Pattern Mode; If; is showing in the upper left corner; Select a Pattern Number; The preset patterns are numbered from “00” to “49”.; Return to the Pattern Play Mode; Return to the pattern play mode either by press-; : Playing the Patterns & Their Variations
• Page 17 – Start Playback; The Beat Display; As the pattern plays, a triangular beat; Stop Playback; To Continue Playback from the Point at Which It Was Stopped; Engage the FOOT SW Function
• Page 18 – Turn ON or OFF; ” on the; Exit; Using the Pattern Variations; When the INTRO, FILL 1, and FILL 2 sections
• Page 19 – You can change sections directly by pressing the; Changing the Tempo; Engage the Tempo Change Mode; Press the [TEMPO] key to engage the tempo; Set the Tempo; Return to the pattern play mode either by
• Page 20 – Changing Chords; Play a Pattern; Note that the micro-keyboard is arranged in the
• Page 21 – Stop playback when done.
• Page 22 – The Chord Types; Turning Tracks On and Off; The QR10 track keys can be used to mute (turn
• Page 23 – : More Creative Control; Changing Voices; “VSEL” will appear on the display while the; Select a Track; Press a track key to select then track for which; Select a Voice; keys to select a new voice for the selected track.
• Page 24 – To assign a voice to the MELODY,; When the RHYTHM track is selected, the; Change the Octave As Required; Use the OCTAVE keys to select the required
• Page 25 – Voice Sampling; Engage the SAMPLING Mode; Record; Input Level Indicator; During recording the track-key LED
• Page 26 – Check the Recorded Sample; Setting the Sampling Frequency; Set the Sampling Frequency; Setting
• Page 27 – Adjusting the Volume of the Tracks; Engage the VOLUME Function; Press the track key corresponding to the track to; Set the Volume; Adjust the Remaining Tracks.; Select and adjust other tracks, as required.; Transposition
• Page 28 – Engage the TRANSPOSE Function.; When a transpose value other than “0” is set, an; Making Your Patterns Swing; Engage the SWING Function; Set the Swing Value
• Page 29 – : Playing the Preset Songs; The QR10 allows you to select and play any of 100 different songs:; Selecting & Playing a Song; Select the Song Mode; Select a Song Number; The SONG Mode Chord Display; During song playback the current chord is
• Page 30 – Playback Stops Automatically; To Continue Playback from the; Specify the Starting Measure; Repeat Playback
• Page 31 – Segment Repeat; Volume Settings in the SONG; Volume settings are made in the SONG mode in
• Page 32 – The PHRASE Keys; Each of the QR10’s 50 preset songs has two pre-; Selecting Different Phrases; Select the Song to Play; Select the song you intend to play in the normal way.; Engage the PHRASE SELECT Function
• Page 33 – Play the current song and use the PHRASE keys as required.; Setting the Phrase Volume; the track volume can be adjusted in the PATTERN mode.; Press the [PHRASE] key for which you want to
• Page 34 – : Recording Original Songs; Basic Song Recording; songs are numbered from “50” to “99”.; Engage the Record Ready Mode; Press the [RECORD] key to engage the record; If the MELODY track indicator lights instead; Select a Pattern; Select the pattern on which you want to base
• Page 35 – Start Recording; Enter Section and Chord Changes
• Page 36 – Stop Recording; Play Your Song; You can now play your song in the same way as the preset songs.; Overdubbing; After selecting the song to which you want to; Select the MELODY Track; If the MELODY track indicator is not lit, press; Select the voice you want to use for the melody
• Page 37 – Set a Quantize Value If Necessary; Quantization ensures that all notes are aligned to
• Page 38 – Fixing Mistakes — Deleting Unwanted Changes; indicator will light.; The Accompaniment Tracks
• Page 39 – Easy “CHORD PROGRESSION” Recording; progressions and fast chord changes.; Record the Required Chord Changes; accompaniment tracks are selected.
• Page 40 – Record the Required Section, Pattern and Other Changes; The Song Clear & Copy Functions; Song Clear; Select a Song
• Page 41 – Song Copy; new user song number, in which it can be modified as required.; Select the Source Song; from the COPY function.
• Page 42 – : Recording Original Patterns; as the preset patterns:; Recording the Combination Patterns; Select the PATTERN Mode; The six sections for each combination patterns
• Page 43 – Press the track key corresponding to the part you; Recording the User Patterns; The six sections for each user pattern can be
• Page 44 – Quantize; Pattern Length; Select a Track to Record
• Page 45 – Select the voice you want to use for the current; Select a Chord; Select the chord you want to record with: use; Play the required part either on the micro-keyboard
• Page 46 – Delete mistakes as required.; To delete mistakes, simply play any note on the; Record the Remaining Tracks; The Pattern Clear & Copy Functions; Pattern Clear; Select a Pattern and Section; Engage the CLEAR Function
• Page 47 – Pattern Copy; Select the Source Pattern and Section; select the section of the pattern you want to copy.; Engage the COPY Function; The pattern number and section name to be
• Page 48 – exit from the COPY function.
• Page 49 – Bulk Dump; Although the QR10 has memory for 50 user/; Bulk Reception of Song & Pattern Data; In the PATTERN or SONG mode the QR10 will
• Page 50 – MIDI Synchronization Mode; Select this function by pressing the QR10; The QR10 as an ABC Expander; The QR10 features an advanced ABC (Auto; The ABC Settings
• Page 51 – The “LOWr” and “UPPr” parameters set
• Page 52 – Appendix; Voice List & Polyphony Information; Turn the QR10 power OFF.
• Page 54 – Troubleshooting; Error Messages
• Page 55 – Specifications
• Page 56 – MIDI Data Format
• Page 58 – MIDI IMPLEMENTATION CHART
• Page 59 – Index