Yamaha GO44 - Manual

9 Software Installation — Windows users Installing the driver and the Control Panel 1. Insert the included “TOOLS for GO44/GO46” CD-ROM in the CD-ROM drive ofyour computer. 2. Double-click on the CD-ROM drive icon in the My Computer menu. Open[GO44Driver_] → [GO44 Setup.exe] to start the InstallShie...

13 Front Panel A PHONES jack Output for a 1/4" stereo headphone jack. This signal output applies not only to that of theOUTPUT 1/2 jacks (see Rear Panel), but also allows monitoring of other audio channels usingthe GO44 Control Panel. (See page 19.) B VOLUME control Adjusts the output level of t...

16 Windows drivers The GO44 audio interface features two kinds of audio drivers that support a variety ofapplications. The audio drivers support all bit rates between 8 and 24 bits with all commonsample rates between 32 and 192 kHz. (Supports digital I/O up to 96 kHz) MME driver The Windows MME driv...

17 Drivers For Cubase, the inputs are called “Line 1/2 left GO44”, “SPDIF left GO44”, etc. Also, the outputs(generally called “busses” or “channels”) available in the individual programs are generally called“Multichannel 1 GO44”, “SPDIF/AC3 left GO44”, etc. Cubase LE MIDI driver This driver is for u...

18 Drivers Mac OS X drivers In Mac OS X, the GO44 system is supported completely by Apple CoreAudio and CoreMIDI.Device-specific drivers are not required. If you would like to use the GO44 for the default systemsound output, select the GO44 audio driver in [System Preferences] → [Sound] → [Output]. ...

19 The GO44 Control Panel is quite intuitive and should not present beginners with major problems.Here, depending on the requirements of each situation, you can have total control of the audiointerface, reduce levels, route inputs to any output or set the Master Clock values. The functions and the p...

20 GO44 Control Panel DAW IN 1/2, 3/4, 5/6 Here you can adjust the levels of the output signals sent from DAW applications.As with the ANALOG IN / DIGITAL IN, a separate fader is available for each mono channel. Theindividual channels can be joined using the switchable stereo link function (the [PAI...

21 GO44 Control Panel The ASIO control panel (Windows only) Selects a latency value (delay in playing the audio signals) when using the ASIO driver. To openthe ASIO panel, click the [ASIO] button in the SETTINGS column of the MAIN display.If the value is too low (and the sample rate too high), this ...

22 GO44 Control Panel ABOUT The ABOUT display of the GO44 Control Panel gives you all of the relevant facts on your ControlPanel, audio drivers, firmware version, and operating system. To open the ABOUT display inWindows, click the [ABOUT] button in the SETTINGS column of the MAIN display. On the Ma...

23 ■ General Specifications ■ Input/Output Specifications Specifications Bit Depth 8/16/24 Sampling Frequency (kHz) 32/44.1/48/88.2/96/192 Frequency Response 20Hz — 20kHz Dynamic Range 109dB (Input (Mid) @ 44.1kHz) Power Consumption 6W Analog Input Connector Nominal Input Level Resolution INPUT 1/2 ...

24 GO44 • The system requirements below may differ slightlydepending on the par ticular operating system. • For details on minimum requirements for each DAW(Digital Audio Workstation) software, refer to therespective owner’s manual. • You can check the latest system requirements on theInternet.http:...

25 ■ The GO44 won’t turn on. • Is the supplied power adaptor properly plugged into both the GO44 and an appropriate ACwall outlet? • If you are using a 4–pin/6–pin IEEE1394 (FireWire) adaptor to connect the GO44 to the com-puter with a 4–pin type IEEE1394 (FireWire) port, use the included AC power a...

EN U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2006 Yamaha Corporation Yamaha Web Site (English Only) http://www.yamahasynth.com Yamaha Manual Library http://www.yamaha.co.jp/manual/ Owner‘s Manual