Page 2 - CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.; LASER SAFETY
iii CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust,...
Page 3 - English; Contents; Introduction
1 English Contents Introduction Region Codes ..............................................................3Supplied accessories ..................................................3Notes about discs ......................................................3Cleaning discs ...................................
Page 4 - Setup Menu
2 Contents Setup Menu General Setup Menu............................................... 23 Selecting DVD-Audio/Video mode ........................ 23Locking/Unlocking the disc for viewing ................. 23Dimming player’s front panel display ..................... 23Programming disc tracks (not fo...
Page 5 - Region Codes; ALL; Cleaning discs
3 English Introduction Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. DVD discs must be labeled for ALL regions or Region 2 in order to play on this Player. You cannot play discs that are labeled for other regions. – Remote control – Batteries (two...
Page 6 - Functional Overview; Front Panel
4 Functional Overview Front Panel A.DRCT ML.CH D.MIX STANDBY/ON – turns on this unit or sets it to the standby mode Disc tray B PLAY – starts playback / OPEN/CLOSE – opens or closes the disc tray 9 STOP – stops playback ; PAUSE – pauses playback DVD-AUDIO indicator – lights up when the player detect...
Page 7 - Rear Panel
5 English Functional Overview Caution: Do not touch the inner pins of the jacks on the rear panel.Electrostatic discharge may cause permanent damage to the unit. Rear Panel
Page 8 - * Press and hold button for about two seconds.; Remote Control; AUDIO DIRECT
6 Functional Overview * Press and hold button for about two seconds. Remote Control B / | – turns on this player or sets it to the standby mode numeric buttons– selects numbered items in the currently displayed menu ON SCREEN– accesses or clears the player’s On Screen Display menu SETUP– accesses or...
Page 9 - Preparation; • Depending on the equipment you wish; General Notes on connections
7 English Preparation Never make or change connections with the power switched on. • Depending on the equipment you wish to connect, there are various ways you could connect this unit. Possible connections are shown in the following drawings. • Please refer to the manuals of other equipment as neces...
Page 10 - ch discrete jacks
8 Preparation This player has two types of analog output jacks. 6ch discrete jacks To reproduce multi-channel Super Audio CD and DVD-Audio, connect these jacks to your AV receiver’s multi channel input jacks using commercially available audio pin cables. MIXED 2CH jacks Use the audio/video cable sup...
Page 11 - Video Connections
9 English Preparation If your AV receiver has video output jacks, connect your receiver (and then to your TV) so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your receiver.The player has four types of video output jacks....
Page 12 - Getting Started; Using the remote control; Handling the remote control; Step2: Turning on the power
10 Getting Started 1 Open the battery compartment. 2 Insert the supplied two batteries type R06 or AA, following the indications (+ –) inside the compartment. 3 Close the cover. Using the remote control Handling the remote control • Do not spill water or other liquids on the remote control. • Do not...
Page 13 - – If there is not a proper picture on your TV,; Setting the OSD Language
11 English Getting Started 4 Press 34 to highlight one of the options below: PAL Select this if the connected TV is PAL system. It will change the video signal of an NTSC disc and output in PAL format. NTSC Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc...
Page 15 - Press; to adjust the setting that best
13 English Getting Started [FRONT SPEAKER, CENTER SPEAKER, SURROUND SP] OFF (only for CENTER and SURROUND speakers)Select when no speakers are connected. LARGESelect if the connected speakers can reproduce low frequency signals below 120 Hz. SMALLSelect if the connected speakers cannot reproduce low...
Page 16 - Disc Operations
14 Disc Operations IMPORTANT!– If the inhibit icon ( or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the di...
Page 17 - Repeat; • While playing a disc, press REPEAT; continuously to choose a ‘Play Mode’.; While playing a disc, press A-B at your; chosen starting point.; Press A-B again at your chosen end point.; Shuffle; Press SHUFFLE during playback.; currently selected area only.; Using the Disc Menu; or numeric buttons on
15 English Disc Operations Repeat • While playing a disc, press REPEAT continuously to choose a ‘Play Mode’. DVD-V/DVD-A ➔ RPT ONE (repeat chapter) ➔ RPT TT/GRP (repeat title/group) ➔ RPT ALL (repeat disc) ➔ RPT OFF (repeat off) VCD/SVCD/CD ➔ RPT ONE (repeat track) ➔ RPT ALL (repeat disc) ➔ RPT OFF ...
Page 18 - Zooming in
16 Disc Operations Zooming in This function allows you to enlarge the picture on the TV screen and to pan through the enlarged picture. 1 During playback, press ZOOM repeatedly to display the picture with different scales. ➜ Use 1 234 to pan through the enlarged picture. ➜ Playback will continue. 2 ...
Page 19 - OR; Playing a Title; Special DVD Features
17 English Disc Operations Time Search (DVD/VCD) 1 Press 34 to select [TT TIME] or [CH TIME] (DVD) or [TRACK TIME] or [DISC TIME] (VCD). ➜ [TT TIME] refers to the total time of the current title, and the [CH TIME] refers to the total time of the current chapter. 2 Press ENTER/OK. 3 Enter hours, minu...
Page 20 - Use the; or the numeric; Preview Function; to select a track or use; Press; to open the previous or; Special VCD & SVCD Features
18 Disc Operations Playback Control (PBC) For VCD with Playback Control (PBC) feature (version 2.0 only)• Press MENU to toggle between ‘PBC ON’ and ‘PBC OFF’. ➜ If you select ‘PBC ON’, the disc menu (if available) will appear on the TV. ➜ Use the S / T or the numeric buttons to select a play option....
Page 21 - Changing pages; then press ON SCREEN .; to select a bonus group, then; Enter a four-digit password using the; to select a track, then press
19 English Disc Operations DVD-Audio has developed for the sole purpose of creating high quality pure sound with Linear PCM and Packed PCM (lossless coding) in up to six audio-channels. Sampling frequencies of 192 kHz/24 bits are supported.Moreover, many DVD-Audio discs offer slide show and page tur...
Page 22 - – A hybrid disc has one HD layer and one; Playing a disc; Insert the disc and close the tray.; Playback starts automatically.; Press; • The SA-CD indicator lights only when
20 Disc Operations The SA-CD standard is based on Direct Stream Digital (DSD) technology. This new direct-stream digital format comprises a 1-bit system that has a digital sampling frequency 64 times higher than that of conventional audio CD. There are three types of SA-CD discs: single layer, dual ...
Page 23 - General Operation; Playback will start automatically, if not; to select another; Selecting a folder and track/file; to select the folder and press; different ‘Play Mode’.
21 English Disc Operations General Operation 1 Load a disc. ➜ The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. ➜ The data disc menu appears on the TV screen. 2 Playback will start automatically, if not press PLAY ( B ). During playback, you can;•...
Page 24 - Zoom picture
22 Disc Operations 1 Load a Picture disc (Kodak Picture CD, JPEG). ➜ For Kodak disc, the slide show will begin. ➜ For JPEG disc, the picture menu appears on the TV screen. 2 Press PLAY ( B ) to start the slide-show playback. Preview Function (JPEG) This function shows the content of the current fold...
Page 25 - General Setup Menu
23 English Setup Menu The setup is carried out via the TV, enabling you to customize the DVD Player to suit your particular requirements. 1 Press SETUP. 2 Press 1 2 to select ‘General Setup’ icon. 3 Press ENTER/OK to confirm. Selecting DVD-Audio/Video mode 1 In ‘GENERAL SETUP PAGE’, press 34 to high...
Page 26 - OSD Language
24 Setup Menu Programming disc tracks (not for Picture CD/MP3) You can play the contents of the disc in the order you want by programming the tracks to be played. Up to 20 tracks can be stored. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [PROGRAM], then press 2 to select [INPUT MENU]. 2 Press E...
Page 27 - Sleep Timer; – Time search feature is not available during; Setting the analog output
25 English Setup Menu Sleep Timer This feature automatically sets the DVD player in standby mode after the amount of time you have set. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight [SLEEP], then press 2 . 2 Press 34 to select a setting. ➜ You can select from 15, 30, 45 and 60 minutes. Select [OF...
Page 28 - Setting the Digital output; In ‘AUDIO SETUP PAGE’, press; Press the; to highlight an option.; Enter its submenu by pressing; to
26 Setup Menu Setting the Digital output The options included in Digital Audio are: ‘Digital Output’ and ‘LPCM Output’. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight [DIGITAL AUDIO], then press 2 . 2 Press the 34 to highlight an option. 3 Enter its submenu by pressing 2 . 4 Move the cursor by press...
Page 29 - Night Mode; to select a setting, then press; to select ‘Video Setup’ icon.; TV Type; In ‘VIDEO SETUP PAGE’, press; to highlight one of the options; Video Setup Menu
27 English Setup Menu Night Mode In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favorite action movie without disturbing others at night. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight [NIGHT MODE], the...
Page 30 - Progressive; Picture Setting
28 Setup Menu Progressive This feature is only applicable if you have connected this DVD Player to a Progressive Scan TV through the Y Pb Pr jacks (see page 9). 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight [PROGRESSIVE], then press 2 . OFFTo disable Progressive Scan function. ONTo enable Progressi...
Page 31 - Switching the YUV/RGB; Preference Setup Menu
29 English Setup Menu BRIGHTNESSIncrease the value will brighten the picture or vice versa. Choose zero (0) for average setting. CONTRASTIncrease the value will sharpen the picture or vice versa. Choose zero (0) to balance the contrast. TINTIncrease the value will darken the picture or vice versa. C...
Page 32 - – Some DVDs are not encoded with a rating; Playback of VR Format
30 Setup Menu 1 In ‘PREFERENCE PAGE’, press 34 to highlight [PARENTAL], then press 2 . 2 Press 34 to highlight a rating level for the disc inserted and press ENTER/OK. ➜ To disable Parental controls and have all Discs play, select [8 ADULT]. 3 Use the numeric buttons to enter the six-digit password ...
Page 33 - to highlight either [TITLE
31 English Setup Menu To play back a disc in VR format 5 Press SETUP to close the setup menu. 6 Press PLAY. The setting you selected will begin to play. Previewing VR format 7 During playback, press SCAN. 8 Press 34 to highlight either [TITLE DIGEST] or [TITLE INTERVAL]. 9 Press ENTER/OK to select t...
Page 34 - Changing the Password; Restoring to original settings
32 Setup Menu Changing the Password The same password is used for both Parental Control and Disc Lock. Enter your six-digit password when prompted on the screen. The default password is 000 000. 1 In ‘PREFERENCE PAGE’, press 34 to highlight [PASSWORD], then press 2 to select [CHANGE]. 2 Press ENTER/...
Page 35 - Language Codes
33 English Language Codes These pages can be used to select other languages.This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”. Abkhazian 6566 German 6869 Afar 6565 Gikuyu; Kikuyu 7573 Afrikaans 6570 Greek, 6976 Albanian 8381 Guarani 7178 Amharic 6577 Gujarati 7185 Arabic 6582 Ha...
Page 37 - Troubleshooting; Problem
35 English Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA de...
Page 38 - Disc can’t be played
36 Troubleshooting Problem Solution Disc can’t be played – The CD-R/RW, DVD+R/RW, DVD-R/RW and DVD-RW (VR format) must be finalized. – Ensure the disc label is facing up.– Check if the disc is defective by trying another disc.– If you have recorded a Picture CD or MP3 CD yourself, ensure that your d...
Page 39 - Glossary
37 English Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and hori-zontal sizes of a displayed image. The horizo...
Page 41 - Specifications
39 English Specifications PLAYBACK SYSTEM DVD Video DVD-Audio SA-CD multi-channel and SA-CD stereo Video CD & SVCD CD PICTURE CD CD-R, CD-RW DVD+R, DVD+RW DVD-R, DVD-RW VIDEO PERFORMANCE Video (CVBS) Output 1 Vpp into 75 ohm S-Video output Y: 1 Vpp into 75 ohm C: 0.3 Vpp into 75 ohm RGB (SCART) ...
