Yamaha DSP-Z7 - Manual
Yamaha DSP-Z7 Amplifier – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Firmware Update by USB; STRAIGHT; ADVANCED SETUP; MASTER
- Page 4 – Firmware Update Through the Internet; Do not interrupt power during the update.
- Page 5 – Troubleshooting; MENU
Firmware Update Procedure for DSP-Z7
Page.1 of
5
IMPORTANT NOTICE
Do not attempt to update your Yamaha receiver using any other data file except those provided
directly from the Yamaha website or through your network connection.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required
to restore proper operation will not be covered under the Yamaha Limited Warranty.
Choose from the following 2 methods to update to the latest firmware.
9
Click here for
Firmware Update Through the Internet
(Connection to the Internet is required)
9
Click here for
Firmware Update by USB
(A USB thumb drive is required)
In case of error, see the
Troubleshooting
section
on the last page.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Firmware Update Procedure for DSP-Z7 Page.2 of 5 Firmware Update by USB Step1: Delete any existing files in the USB flash drive. Step2: Download and copy the firmware “RXZ7-xxxx.bin” into the root directory of the USB flash drive. Step3: Set the MASTER ON/OFF button on the front panel to OFF, and co...
Firmware Update Procedure for DSP-Z7 Page.4 of 5 Firmware Update Through the Internet Step1: Set the MASTER ON/OFF button on the front panel to OFF, and confirm that the AC power cable is properly connected to an outlet. Step2: While pressing the STRAIGHT button, press (and release) the MASTER ON/OF...
Firmware Update Procedure for DSP-Z7 Page.5 of 5 Troubleshooting Case #1: Instead of “ UPDATE OK ”, an error message appeared on the display during updating or “ ERROR ” appeared when confirming the firmware version in Advanced Setup. To recover, retry the update procedure of USB/Network from step1 ...
