Page 2 - CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.; Note; IMPORTANT
CAUTION CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1. To assure the finest performance, please read thismanual carefully. Keep it in a safe place for futurereference. 2. Install this unit in a cool, dry, clean place — awayfrom windows, heat sources, sources of excessivevibration, dust, moisture ...
Page 3 - FEATURES; -Channel Power Amplification; CONTENTS; PREPARATION; RECORDING A SOURCE ON TAPE, MD OR; ADVANCED OPERATION
English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION 1 FEATURES 5-Channel Power Amplification ◆ Minimum RMS Output(0.06% THD, 20 Hz – 20 kHz)Main: 70 W +70 W (8 Ω ) Center: 70 W (8 Ω ) Rear: 70 W + 70 W (8 Ω ) Multi-Mode Digital Sound FieldProcessing ◆ Digital Sound Fi...
Page 4 - GETTING STARTED; Checking the Package Contents; Close the battery compartment cover.; Battery Replacement; Notes
2 GETTING STARTED Checking the Package Contents Check that the following items are included in your package. Remote control Batteries (AAA, R03, UM-4 type) Quick reference card Connection guide Battery Installation in the RemoteControl 1 Turn the remote control over and slide thebattery compartment ...
Page 5 - ANCED OPERA; Using the Remote Control
3 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION Using the Remote Control The remote control transmits a directional infrared beam. Besure to aim the remote control directly at the infrared sensorduring operation. When the sensor is covered or there is alarge obj...
Page 6 - w e r; CONTROLS AND FUNCTIONS; Front Panel
4 L R – + – + 1 2 3 4 6 5 7 8 9 0 q w e r t y 5 INPUT SELECTOR Turn this selector to select the input source (TUNER, CD,PHONO, CBL/SAT, V-AUX, VCR, D-TV, DVD/LD) thatyou want to listen to or watch. The arrow for the selectedinput source indicator lights up on the display. 6 VOLUME Turn this control ...
Page 8 - Display
6 Display 4 Input source indicators One of the arrows for these indicators lights up dependingon which source is selected. 5 TAPE/MD MONITOR indicator This lights up when the tape deck or MD recorder, etc. isselected as the input source by pressing TAPE/MD MON /EXT. DECODER (or TAPE/MD). 6 g and o i...
Page 9 - Remote Control
7 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION Remote Control CONTROLS AND FUNCTIONS 1 2 89 0 3 q 4 w 6 r e t y u 7 5 TV VOLUME TV POWER TV INPUT EFFECT Select theAMP/TUNposition. This section describes the basic operation of this unit withthe remote control. F...
Page 10 - Description of the Numeric Buttons; When selecting an input source
8 q A/B/C/D/E, PRESET +/– These buttons are used to select a preset station when usingthe YAMAHA tuner.A/B/C/D/E: To select one of a group (A to E) of presetstations PRESET +/–: To select a preset station number (1 to 8) w d (next), u (back) These buttons are used to advance or go back one selection...
Page 11 - SPEAKER SETUP; Speaker Placement; Main speakers; Subwoofer; CAUTION
9 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION SPEAKER SETUP Speaker Placement Refer to the following diagram when you place thespeakers. Speakers to Be Used This unit is designed to provide the best sound-field qualitywith a 5-speaker system, using main speake...
Page 12 - CONNECTIONS; Before Connecting Components
10 CONNECTIONS Before Connecting Components CAUTION Never connect this unit and other components to mains power until all connections between components have beencompleted. Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Somecompon...
Page 13 - Connecting an Audio Component; PHONO terminals
11 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION Connecting an Audio Component ■ PHONO terminals These terminals are used to connect a turntable with an MMor high-output MC cartridge. If you have a turntable with alow-output MC cartridge, use an inline boosting ...
Page 14 - Connecting a Video Component; Audio signal terminals
12 Connecting a Video Component ■ Audio signal terminals Be sure to connect the right channel (R), left channel (L),input (IN) and output (OUT) properly. ■ S Video signal terminals Use a special S VIDEO cable (commercially available) forthe S VIDEO connection. ■ Digital audio signal terminals If you...
Page 15 - TV monitor with a 21-pin connector; Connecting to an External Decoder
13 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION ■ VIDEO terminals (composite) If your video components do not have “S” video terminals,they can be connected to this unit’s VIDEO terminals. Besure to connect the input (IN) and output (OUT) properly. Note • If vi...
Page 16 - Connecting the Speakers; CAUTIONS; MAIN SPEAKERS terminals; CENTER SPEAKER terminals
14 Connecting the Speakers Be sure to connect the right channel (R), left channel (L),“+” (red) and “–” (black) properly. If the connections arefaulty, no sound will be heard from the speakers, and if thepolarity of the speaker connections is incorrect, the soundwill be unnatural and lack bass. CAUT...
Page 17 - Speaker cables
15 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION ■ Speaker cables 1 Remove approx. 10 mm (3/8”) of insulationfrom each of the speaker cables. 2 Twist the exposed wires of the cable togetherto prevent short circuits. ■ Connecting to the MAIN SPEAKERS terminals 1 ...
Page 18 - IMPEDANCE SELECTOR Switch; WARNING; Connecting the Power Supply Cords
16 IMPEDANCE SELECTOR Switch WARNING Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise the unit may bedamaged.If this unit fails to turn on when STANDBY/ON (or POWER) is pressed, the IMPEDANCE SELECTOR switch may notbe fully slide to either position. I...
Page 19 - Using the Test Tone; ADJUSTING THE SPEAKER BALANCE; Before You Start Adjusting; Set VOLUME to the “
17 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION Using the Test Tone The adjustment of each speaker sound output level shouldbe performed at your listening position with the remotecontrol. After completing the adjustments, use VOLUME(+/–) at your listening posit...
Page 21 - PLAYING A SOURCE; To select a tape or an MD source
19 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION When using the remote control, set the selector dial tothe AMP/TUN position. 1 Set VOLUME to the “ m ” position. 2 Turn the power on. 3 Press SPEAKERS A or Bto select the mainspeakers to be used. If you use two ma...
Page 22 - Use the digital sound field processor.; To mute the sound
20 5 Play the source. Refer to the instructions for the source component. Note • When controlling an audio/video component (tape deck, MD recorder, CD player, DVD/LD player, etc.) with the remotecontrol, set the selector dial to the appropriate position (TAPE/MD, CD, DVD/LD, etc.), corresponding to ...
Page 23 - AUTO; DTS; Switching the input mode
21 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION Input Mode (for the DVD/LD, TV/digital TV and cable TV/satellitetuner sources) This unit allows you to switch the input mode for sourcesthat send both digital and analog signals to this unit. TheAUTO, DTS and ANAL...
Page 24 - Notes on playing an LD source
22 ■ Notes on playing a sourceencoded with DTS • If “DATA ERROR” appears on the display while playing an LD source encoded with DTS, stop playback and turn the player offand then on again. • If the digital output data of the player has been processed in any way, you may not be able to perform DTS de...
Page 25 - On the remote control; DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT; Selecting a DSP Program; On the front panel; Press PROGRAM
23 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION ■ On the remote control 1 Make sure that the effect speakers (center andrear) and subwoofer are turned on. 2 Press DSP. The indicator lights up for aboutthree seconds. 3 Use the numeric buttons(1 to 8) to select t...
Page 27 - RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE
25 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTRODUCTION PREP ARA TION RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE L R – + – + 1,4 2 Recording adjustments and other operations are performedfrom the tape deck, MD recorder or VCR. Refer to theinstructions for these components. 1 Se...
Page 28 - SOUND FIELD PROGRAM
26 [4] PRO LOGIC/ENHANCED ( o x ) • Input source: Dolby Surround2-ch Dolby Digital • Output channel: 4 channels • DSP: 1 (surround) [5] DOLBY DIGITAL/ENHANCED ( g x ) • Input source: Dolby Digital • Output channel: 5.1 channels • DSP: 2 (surround L, R) [6] DTS DGTL SUR/ENHANCED ( t x ) • Input sourc...
Page 30 - For Hi-Fi audio sources; Dolby Pro Logic + 2 digital sound fields
28 No. PROGRAM FEATURES 4 MONO MOVIE ( x ) • Input source: Monaural • Output channel: 1 channel • DSP: 1 This program is designed specifically to enhance monauralsources. Compared to a strictly mono setting, the sound imageis wider and slightly forward of the speaker pair, lending animmediacy to the...
Page 31 - SET MENU; Adjusting Items on the SET MENU; Press
29 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION SET MENU 1 2 3 This unit provides you with the following items on the SETMENU to maximize the performance of your system andexpand your enjoyment for audio listening and videowatching. 1. CENTER SP2. REAR SP3. MAI...
Page 32 - Description of Each Item
30 Description of Each Item 1. CENTER SP Choices: LRG (Large)/SML (Small)/NONEPreset position: LRG (Large) LRG (Large) Select this position if your center speaker is approximatelythe same size as the main speakers. In this position, full-range signals on the center channel are directed to the center...
Page 34 - level of the LFE channel for DTS); LAST; LAST
32 8. DTS LFE (Adjusting the output level of the LFE channel for DTS) Control range: –10 dB to +10 dB (in 1 dB steps)Preset value: 0 dB Note • This adjustment is effective only when DTS is being decoded and the selected source encoded with DTS contains LFE signals. This adjusts the output level of t...
Page 35 - DELAY TIME AND SPEAKER OUTPUT LEVELS; Delay Time
33 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION 1. PRO LOGIC/Normal 15 to 30 20 DOLBY DIGITAL/Normal 0 to 15 5 DTS DGTL SUR/Normal 0 to 15 5 PRO LOGIC/ENHANCED 15 to 30 20 DOLBY DIGITAL/ENHANCED 0 to 15 5 DTS DGTL SUR/ENHANCED 0 to 15 5 2. 70 mm SPECTACLE 15 to...
Page 36 - Adjusting Method
34 Adjusting Method Adjustments should be performed with the remote controlwhile watching the information on the display. 1 Set the selector dial to theAMP/TUN (or DSP/TUN)position. 2 Press TIME/LEVEL repeatedly to select theitem you want to adjust. Each time you press TIME/LEVEL, the selected itemc...
Page 37 - SLEEP TIMER; Setting the SLEEP Timer
35 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION SLEEP TIMER Canceling the Selected SLEEPTimer Press SLEEP repeatedly until “SLEEP OFF”appears on the display. It will soon disappear and the “SLEEP” indicator willgo off. Note • The SLEEP timer can also be cancele...
Page 38 - PRESET REMOTE CONTROL; Selector Dial; Controlling this unit; Controlling your TV
36 PRESET REMOTE CONTROL The provided remote control is factory set to control not only this unit but also most YAMAHA audio components connectedto it. Selector Dial There are nine positions that you can select to control connected components with this remote control. For example, if the CDposition ...
Page 40 - Description of Each Position
38 Description of Each Position ■ TAPE/MD position • The dark-shaded buttons do not function.• If your component does not respond to any of the codes listed for the manufacturer, use the original remote control supplied with your component. PRESET REMOTE CONTROL Select the TAPE/MD position. r REC/PA...
Page 41 - CD position
39 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION ■ CD position • The dark-shaded buttons do not function.• If your component does not respond to any of the codes listed for the manufacturer, use the original remote control supplied with your component. PRESET RE...
Page 42 - DVD MENU position
40 ■ DVD/LD position ■ DVD MENU position Note • DVD MENU operations cannot be performed for some DVD players. • The dark-shaded buttons do not function.• If your component does not respond to any of the codes listed for the manufacturer, use the original remote control supplied with your component. ...
Page 43 - VCR position
41 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION ■ VCR position ■ CBL/SAT position ■ TV position Note • You can control your VCR if you have set the code for it. • The dark-shaded buttons do not function.• If your component does not respond to any of the codes l...
Page 44 - Advanced Information; Setup codes
42 Advanced Information ■ Setup codes You can set the code for the manufacturer of yourcomponent in each position of the selector dial. 1 Turn on your component to be used. 2 Set the selector dial to thedesired position for thecomponent (TAPE/MD, CD,DVD/LD, etc.). 3 Press i (right) and j (left) at t...
Page 45 - Returning to the factory-set codes
43 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION ■ Returning to the factory-set codes To return to the factory-set codes in all positions, followthese steps. 1 Press i (right) and j (left) at the same time for aboutfour seconds. The indicator flashes twice. 2 En...
Page 46 - TROUBLESHOOTING; General
44 TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simplemeasures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the powercord and contact your authorized Y...
Page 48 - Others
46 ■ Remote control This unit is in the standby mode. Turn on the power of the unit. SYMPTOM CAUSE REMEDY Refer topage The remote control doesnot work. Direct sunlight or lighting (from an invertertype of fluorescent lamp, etc.) is striking theremote control sensor of this unit. Reposition the unit....
Page 49 - When playing back a source encoded with DTS
47 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION SYMPTOM CAUSE REMEDY ■ When playing back a source encoded with DTS Refer topage A loud hissing noise isheard when playing backa source encoded withDTS. The player which plays back the source is notconnected to a d...
Page 50 - SPECIFICATIONS; AUDIO SECTION
48 SPECIFICATIONS AUDIO SECTION • Minimum RMS Output Power 20 Hz to 20 kHz, 0.06% THD, 8 ohms Main L/R, Center, Rear L/R ..................................................... 70 W1 kHz, 0.09% THD, 8 ohms Main L/R, Center, Rear L/R ..................................................... 80 W • Maximum ...
Page 51 - GLOSSARY; CINEMA DSP; Dolby Surround
49 English B ASIC OPERA TION ADV ANCED OPERA TION APPENDIX INTR ODUCTION PREP ARA TION GLOSSARY CINEMA DSP ■ Dolby Surround Dolby Surround uses four discrete channels and fivespeakers to reproduce realistic and dynamic sound effects:two main channels (left and right), a center channel fordialog, and...
Page 52 - INDEX
50 INDEX A Accessories .......................................................................... 2AC outlet ........................................................................... 16 B BALANCE ........................................................................ 20BGV (background video) func...
Page 54 - ii
ii KTV 0601, 1171 LENOIR 0601, 1511 LEYEO 1181 LIFETEC 2591, 2601, 2611,2621, 2641, 2651,2661, 2671, 2681,2691, 2711, 2761,2771, 2781 LOEWE OPTA 0121, 0131, 0581, 0611, 1081 LOGIC 1691, 2281 LOGIK 0551, 1681, 2281 LOWEWE 0831 LUMA 0351, 0451, 1901 LUXMAN 0791 LUXMAN STEREO TUNER 0791 LUXOR 0001, 006...
Page 55 - iii; CABLE TV
iii THORN-FERGUSON 0281, 0371, 0551, 0651,0781, 0861,0881, 1131,1181, 1361,1461, 1971,1991, 2281 TMK 0141, 0791, 1471 TOSHIBA 0141, 0381, 0481,1221, 1271, 1701,1741, 1851, 2151,2801, 2811 TRANS CONTINENS 0451 TRISTAR 2281 TRIUMPH 0481, 0581, 2121 UHER 0431, 0451, 0481,0491, 0511, 1311,1541 ULTRAVOX ...
Page 56 - iv; DVD PLAYER
iv GRUNDIG 0052, 0062, 0092,0232, 0252, 0262,0752, 0802 HANSEATIC 0052, 0812 HARMAN/KARDON 0122, 0922HCM 0002 HINARI 0002, 0202, 0412,0442, 0522 HITACHI 0042, 0172, 0292,0432, 0602, 0662,0812, 1022 IMPERIAL 0072, 0432 INGERSOL 0442 INNO HIT 0002, 0052, 0072 INNOVATION 1142, 1162, 1172INTERFUNK 0022,...
