Xerox GF761RFX - Manual - manualsarea.com

Page 2 - Positioning; Installation

GB 2 ! Before operating your new appliance please read this instruction booklet carefully. It contains important informationfor safe use, installation and care of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of theappliance. Posi...

Page 3 - Gas connection

GB 3 Front Hooking position Back for top H=40 mm ! Use the hooks contained in the “accessory pack” • Where the hob is not installed over a built-in oven, a wooden panel must be installed as insulation. Thismust be placed at a minimum distance of 20 mm fromthe lower part of the hob. Ventilation To en...

Page 5 - Burner and nozzle specifications; DC

GB 5 Burner and nozzle specifications Table 1 Liquid Gas Natural Gas Burner Diameter (mm) Thermal power kW (p.c.s.* Thermal power kW (p.c.s.*) By-Pass 1/100 Nozzle 1/100 Flow* g/h Thermal power kW (p.c.s.*) Nozzle 1/100 Flow* l/h Ridot. Nomin. (mm) (mm) *** ** Nomin. (mm) Reduced Fast (RR) 100 0.70 ...

Page 6 - Electrical Connection

GB 6 Electrical Connection Power supply voltage and frequency: 220-240V a.c.50/60Hz. ! The supply cable must be positioned so that it never reaches at any point a temperature 50°Chigher than the room temperature. The cable mustbe routed away from the rear vents. Should yourequire it, you may use a l...

Page 7 - Overall view

GB 7 Description of the appliance Overall view * Only available on certain models. • GAS BURNERS differ in size and power. Use the diameter of the cookware to choose the mostappropriate burner to cook with. • Control Knobs for GAS BURNERS adjust the power or the size of the flame. • GAS BURNER ignit...

Page 8 - Practical advice on using the burners

GB 8 ! The position of the corresponding gas burner or electric hotplate* is shown on every knob. Gas burners Each burner can be adjusted to one of the followingsettings using the corresponding control knob: • Off Maximum Minimum To light one of the burners, hold a lit match or lighternear the burne...

Page 10 - Precautions and tips; General safety; Disposal

GB 10 Precautions and tips ! This appliance has been designed and manufactured in compliance with international safety standards. The followingwarnings are provided for safety reasons and must be readcarefully. General safety • This is a class 3 built-in appliance. • Gas appliances require regular a...

Page 11 - Maintenance and care; Gas tap maintenance

GB 11 Switching the appliance off Disconnect your appliance from the electricity supplybefore carrying out any work on it. Cleaning the appliance ! Do not use abrasive or corrosive detergents such as stain removers, anti-rust products, powder detergentsor sponges with abrasive surfaces: these may sc...

Page 12 - Troubleshooting; Problem; Possible causes/Solution

GB 12 Troubleshooting It may happen that the appliance does not function properly or at all. Before calling the service centre forassistance, check if anything can be done. First, check to see that there are no interruptions in the gas andelectrical supplies, and, in particular, that the gas valves ...

Page 13 - Guarantee; 2 months Parts and Labour Guarantee

Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective be...

Page 14 - Hotpoint Service; Parts and Accessories

After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 10...

Page 15 - Notes