Xerox D60327 - Manual

Xerox D60327

Xerox D60327 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
147 Page 147
148 Page 148
149 Page 149
150 Page 150
151 Page 151
152 Page 152
153 Page 153
154 Page 154
155 Page 155
156 Page 156
157 Page 157
158 Page 158
159 Page 159
160 Page 160
161 Page 161
162 Page 162
163 Page 163
164 Page 164
165 Page 165
166 Page 166
167 Page 167
168 Page 168
169 Page 169
170 Page 170
171 Page 171
172 Page 172
173 Page 173
174 Page 174
175 Page 175
176 Page 176
177 Page 177
178 Page 178
179 Page 179
180 Page 180
181 Page 181
182 Page 182
183 Page 183
184 Page 184
185 Page 185
186 Page 186
187 Page 187
Page: / 187

Table of Contents:

  • Page 2 – Preface; Token Ring; NOTE; Prerequisite manuals; For SNMP support; Changes with this revision
  • Page 3 – Table of Contents; Items Supplied with
  • Page 7 – Items Supplied with Xerox 4500 PS TR
  • Page 8 – Introduction to Xerox 4500 PS TR; Direct host print; data. The Xerox 4500 PS TR - non IPDS offers support for; Direct host print via TCP/IP
  • Page 10 – Supported protocols; SPX; mbedded; NP; rinter; Transport Layer
  • Page 11 – Supported TCP/IP Protocols
  • Page 12 – PrintServer
  • Page 14 – System requirements; Token-Ring LAN Attachment for 4 Mbps or 16 Mbps
  • Page 15 – Supported printers; The Xerox 4500 PS TR supports the following printers:
  • Page 16 – Installation of Xerox 4500 PS TR; CAUTION
  • Page 17 – EU; OFF; language setting - set the switch to; IPC - SETTINGS PRINTOUT; Basic Information; IPDS Setup
  • Page 18 – decimal; Appendix E contains a list of IPDS resident code pages.; LAN; UTP TR
  • Page 20 – Installation procedure; VOID; Centronics
  • Page 21 – and generate a settings printout - pressing the test key on
  • Page 24 – Network installation; Switch off the printer.
  • Page 25 – - start to flash as the Xerox 4500 PS TR tries to contact a BOOTP; Installing upgrade modules; Disconnect all cables to the Xerox 4500 PS TR.; FIRMWARE DOWNLOAD
  • Page 26 – Introduction to configuration; configure the; not; definition on the system
  • Page 27 – About the IP Address
  • Page 28 – Minimum configuration; mandatory; Minimum configuration file; Mandatory parameters:; IP address
  • Page 31 – Configuration using PSinst32; The; to be run under; . The program may be used for setting up; basic; in the; The installation procedure varies from Windows 95 to Windows NT.
  • Page 33 – No configuration of the DLC protocol is necessary.; Windows 95 only; Program; ” and finally “
  • Page 36 – . This is necessary in order; Here’s how you configure the various protocols:
  • Page 39 – native data
  • Page 41 – all; “Refresh”; new
  • Page 42 – The PSinst32 leaves you with two options:
  • Page 43 – the parallel port; or; the LAN
  • Page 44 – does not appear by itself
  • Page 47 – Highlight the driver you wish to use and click “; Open; ” and the firmware is downloaded to the
  • Page 49 – Configuration using Web Browser; With a standard Web Browser, the
  • Page 50 – adm; Once the
  • Page 53 – Previous Menu; Refresh
  • Page 54 – Configuration using Telnet; EXAMPLE
  • Page 55 – Navigation keys; menu fields
  • Page 58 – Enter Selection; To return to the “Enter Selection” prompt, press Enter.; X) Save and Return
  • Page 59 – Bindery Poll Time; Z) Return without saving
  • Page 61 – SNMP Configuration; No. Index Community Name Access Network Address Mask; Selecting Trap will present the following screen:; Trap Parameters
  • Page 62 – Selecting Authorize will present the following screen:
  • Page 63 – at the selection prompts. You will see the following; Configure sessions; at the selection prompts.
  • Page 64 – : When you have made new settings or changed existing, you must; Save Settings; Saving current settings will overwrite default settings.; Enter “YES” to Save or “NO” to return without saving.; at the selection prompts. Follow the
  • Page 65 – Trace destination parameters; (FTP Host Name) to be prompted for making entries to the
  • Page 67 – Configuration using Setup File
  • Page 71 – Enabling IDAPS; Here the following group parameters are enabled / disabled.
  • Page 73 – Printing IPDS; : The number of sessions d efined and the number of; virtual; used will depend on the number of concurrent IPDS
  • Page 74 – : PPD port selection for ICDS print is port no. 5005 and 5006.
  • Page 75 – Define NetWare; Define ENP session
  • Page 76 – Define NetBEUI/NetBios
  • Page 77 – Define Printer session; BEGIN_CONFIGURATION PRINTER X
  • Page 78 – Setting Up via BOOTP server; BOOTPTAB Device Entry; MAC Address; Print Server
  • Page 79 – Notations used in BOOTPTAB file:
  • Page 82 – TFTP in AIX Environment
  • Page 83 – TFTP in OS/2 Environment; Select the Autostart tab.
  • Page 85 – Testing PrintServer; Perform a test printout by pressing the TEST key on the rear panel.
  • Page 86 – About the PING function
  • Page 88 – Enable NetWare; Using the embedded PSERVER; PS TR
  • Page 89 – Using the embedded NPRINTER
  • Page 90 – is able to support up to 2 ENPs. Each; Printing command example; Where PQ2 is the queue supported by the NPRINTER.
  • Page 91 – Bindery
  • Page 96 – Windows ‘95 and NT Setup
  • Page 97 – Example of setup for OS/2
  • Page 99 – Templates
  • Page 100 – OK; ” and the window will close.; Create; ” to create the printer; NOTE: The LPRPORTD program must be started for this; The LPR command may be used to print to the
  • Page 103 – Host Configuration; ’admintool’’; su
  • Page 104 – Defining the remote printer/plotter using ‘; admintool; Use of this command will require root; Enable the printer using the admintool
  • Page 105 – Printer name
  • Page 107 – Create a remote output queue
  • Page 108 – The default value is LPDPRT1.
  • Page 110 – This section describes the following configuration:; The value must be unique within the network.
  • Page 113 – This value must match the value used for the
  • Page 117 – The CRTDEVPRT command is used to create a Printer device.
  • Page 118 – Create a remote output queue; default value is LPDPRT1SCS.
  • Page 119 – support the traditional IBM matrix emulations.
  • Page 120 – : The MTU size should not exceed the maximum size sent through
  • Page 122 – Requirements
  • Page 123 – VTAM definition
  • Page 128 – Logmode; SPPRKEN VBUILD TYPE=SWNET, SWITHCED MAJOR NODE; PSF JCL
  • Page 130 – Configure Data Link Adapters; you may have to create the missing; Data Link Adapter Definition
  • Page 131 – Configure LUs for Downstream PUs
  • Page 132 – c) Choose the LU to be used by the first; Hints; In the panel displayed you should now have the following:; luname; When starting NWSAA, the following message should be on the
  • Page 133 – FSL Configuration; The FSL top can be configured using FSL from the host.
  • Page 134 – Sample PSS/MVS JES2 initialisation statements
  • Page 135 – PSS printer profile using TCP/IP attachment; The IP address of the
  • Page 136 – Sample PSS VM printer profile definition using TCP/IP; KEY
  • Page 137 – Creating a new printer profile; From the PSF/2 control panel you make the following selections:; Profile; The following panel will appear:
  • Page 138 – 40 or 300 according to the resolution of emulation; Settings; Enter; IP Address; Enter the IP address of the
  • Page 139 – Port Number; Select
  • Page 142 – configure KEEPALIVE frequencies.
  • Page 143 – To view current settings enter
  • Page 144 – Problem Determination; Monitoring tools
  • Page 148 – LAN LED is lit but PRT LED is not lit; AFP printing using TCP/IP; PSF indicated communication errors
  • Page 149 – PRT LED flashes slowly; Check that a printer intervention is not pending.; BOOTPTAB file errors; Check the connection to the
  • Page 150 – : ”Testing the Xerox 4500 PS TR ”; Are you unable / able to generate a test printout?; Unable
  • Page 151 – What are the symptoms you have recorded or detected?; Has an upgrade of microcode been performed?; Successfully
  • Page 152 – Excerpt from test page with NetWare settings:; Pserver State: Connecting; then the PServer has not been configured correctly.
  • Page 154 – IPDS
  • Page 156 – Printer errors in front panel; Printer may indicate a physical printer intervention message; Error codes are printer specific, refer to the printer specific; Problem reporting
  • Page 157 – APPENDICES
  • Page 158 – Appendix A: Configuration Using Setup File; Appendix A 1: Configuring via parallel port; IBMNULL; top
  • Page 159 – Appendix A 2: Configuration file parameters; BEGIN_CONFIGURATION IDAPS
  • Page 161 – Description: Ends the substate and sets the settings state to; BEGIN_CONFIGURATION SESSION; Description: Starts definitions for a session. A session contains; PRESENT
  • Page 162 – String of printable characters; BOOTP; YES; MICROCODE; is placed. Used for subsequently download via TFTP.
  • Page 163 – BEGIN_CONFIGURATION NETWARE; in Bindery mode only
  • Page 165 – Description: Sets the Response timeout. The response timeout is; KEEPALIVE; Description: Sets the KEEPALIVE timeout. For every; BEGIN_CONFIGURATION LPDX; Description: The LPD queue name. This parameter is used for
  • Page 167 – Description: Selects the IPDS Virtual Printer to be used in the; BEGIN_CONFIGURATION ICDS 1
  • Page 172 – CTABLES; Selects PCL colour tables; LANGUAGE_DEF POSTSCRIPT; PostScript input priority; MANUALFEED; PostScript manual feed selection; DEFINE SNMP; ENABLED
  • Page 173 – ACCESS
  • Page 174 – Appendix B: Microcode upgrading; Appendix B.1: Upgrading microcode via Parallel port; where
  • Page 175 – You; off
  • Page 178 – off and back on again.
  • Page 179 – Appendix C: idaSetup - IPDS configuration; graphical user interface
  • Page 180 – Appendix D: IPDS resident codepages; CPGID; Decimal
  • Page 181 – Appendix E: Test printout; TEST key
  • Page 182 – Test Printout Pages
  • Page 184 – Appendix F: Error messages; Error code
  • Page 186 – Appendix G: List of abbreviations
  • Page 187 – Appendix H: Selected products for Xerox printers
Loading the manual

1

WARNING:

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used
in accordance with the instruction manual, may cause interference to radio communications. It has
been tested and found to comply with the limits for a Class A computing device pursuant to Subpart
B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such inter-
ference when operated in a commercial environment. Operation of this equipment in a residential
area is likely to cause interference in which case the user at his own expense will be required to take
whatever measures may be required to correct the interference.

EMC

directive

:

This product observes the rules and regulations of the EMC directive. If so required, a declaration of
conformity in local language stipulating the applied rules and regulations can be obtained.

Trademarks:

Company and product names mentioned in this datasheet are trademarks or registered trademarks of
their respective owners.

Xerox Electronic Documentation

Xerox 4500 PS TR

User’s Guide

Doc. no. D60327

Revision 01

Solution for Xerox Printers

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Preface; Token Ring; NOTE; Prerequisite manuals; For SNMP support; Changes with this revision

PrefaceXerox 4500 PS TR 2 Preface July 1997 We congratulate you on your purchase of the Xerox 4500 PrintServer Token Ring . The Xerox 4500 PS TR forms part of a series of print servers developed with the purpose of migrating printing know-how into the LANenvironment. This manual describes the instal...

Page 3 - Table of Contents; Items Supplied with

Table of ContentsXerox 4500 PS TR 3 Table of Contents Preface....................................................................................................................... 2 Prerequisite manuals ................................ ................................ ........................... 2R...

Page 7 - Items Supplied with Xerox 4500 PS TR

Items SuppliedXerox 4500 PS TR 7 Items Supplied with Xerox 4500 PS TR Before you begin installing the Xerox 4500 PS TR make sure that youhave all the items shown below. • Interface (in antistatic bag) for Xerox 4500 PS TR ( non-IPDS ) or ( IPDS top ) • Configuration and printer driver diskettes • Ca...

Other Xerox Models

All Xerox Other