Xerox C424 - Manual
Xerox C424 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WorkCentre® C2424 Copier-Printer; Warning; Maintenance Safety; System Supplies
- Page 3 – Caution; System Location; Do not place the system near a heat source.
- Page 4 – Moving the System; for the system to cool completely before moving or packing it.; Shut Down for Moving System; Never move the system if you receive a; Power Down Error-Head not Parked; Always remove the document feeder before shipping the system.
- Page 5 – must; Operating Safety Guidelines
- Page 6 – Symbols Marked on the
WorkCentre® C2424 Copier-Printer
Copyright © 2005 Xerox Corporation. All Rights Reserved.
A-1
Your system and the recommended supplies have been designed and tested to meet strict safety
requirements. Attention to the following information will ensure the continued safe operation
of your system.
Electrical Safety
■
Use the power cord supplied with your system.
■
Plug the power cord directly into a properly grounded electrical outlet. If you do not know
if an outlet is grounded, ask an electrician to check the outlet.
■
Do not use a ground adapter plug to connect the system to an electrical outlet that does not
have a ground connection terminal.
■
Do not use an extension cord or power strip.
Warning
Avoid the potential of electrical shock by ensuring that the system is properly grounded.
Electrical products may be hazardous if misused.
■
Do not place the system in an area where people might step on the power cord.
■
Do not place objects on the power cord.
■
Do not block the ventilation openings. These openings are provided to prevent overheating
of the system.
■
Do not drop paper clips or staples into the system.
Warning
Do not push objects into slots or openings on the system. Making contact with a voltage
point or shorting out a part could result in fire or electrical shock.
If you notice noises or odors that are not associated with your normal system operation:
1.
Turn off the system immediately
2.
Disconnect the power cord from the electrical outlet
3.
Call an authorized service representative to correct the problem.
User Safety
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
WorkCentre® C2424 Copier-Printer A-2 The power cord is attached to the system as a plug-in device on the side of the system. If it is necessary to disconnect all electrical power from the system, disconnect the power cord from the electrical outlet. Warning Do not remove the covers or guards that ar...
WorkCentre® C2424 Copier-Printer A-3 ■ Follow all warnings and instructions marked on, or supplied with, the system, options and supplies. Caution Use of other than Genuine Xerox WorkCentre C2424 Solid Ink may affect print and copy quality and system reliability. It is the only ink designed and manu...
WorkCentre® C2424 Copier-Printer A-4 Moving the System Caution Parts of the system are hot. To avoid personal injury or damage to the system, allow the ink to solidify. Run the shut-down procedure to cool the system quickly. Wait at least 30 minutes for the system to cool completely before moving or...
