Xerox 13.0 B 141 - Manual - manualsarea.com

Page 2 - FreeFlow Accxes Customer Release Notes; Introduction

2 FreeFlow Accxes Customer Release Notes Version 13.0 b 141 Introduction The FreeFlow® Accxes® Controller Firmware Release 13.0 b 141 provides multinational software for the Xerox 6279 and for the Xerox Wide Format Scan System. The languages supported are English, Deutsch, Espanol, Francais, Italian...

Page 4 - Recommended Configurations; AutoCAD

4 Recommended Configurations The following table specifies the RAM requirements for the various systems and configurations supported by the FreeFlow Accxes controller. FRX Controller LVX Controller System Min Recommend Min Recommend Any System with the following feature keys: • AutoCAD • OtherCAD • ...

Page 5 - to the following version:; Accxes Client Tools; Download the software using LPR with the following command line:

5 Release Installation This version of Accxes (13.0 b 141) requires OS Install CD version 4.1 or higher. BSP Kernel revision 2.6.22.9-61.fc6 or later is also required. Service is required to upgrade from earlier Accxes ® revisions. Regarding scanner firmware revisions: If you are upgrading the firmw...

Page 6 - FreeFlow Accxes based devices; Scan to Multi-page TIF and PDF

6 New Features in FreeFlow Accxes version 13.0 Support for 6279 Printer and Scanner and User Interface The 6279 includes a new color touch screen user interface. The user interface controls the scanner functionality as well as the printer queue and other print related functions. Scan to Remote Print...

Page 8 - Wide Format Scanner; and then press “ENTER”

8 Wide Format Scanner Copy Templates lost after reboot The copy and scan templates defined on a Wide Format Scan system will be lost after a power cycle. Clear Last Image When the “Clear Last Image” feature is selected on the Xerox Wide Format Scan System, it may take a few minutes for a Photo or Co...

Page 9 - Set Mismatch Mode to Substitute

9 Manual Feed Manual feed media source will be ignored when used with the Accxes Client Tools’ page composition feature Go to Accxes Client Tools > Job Option tab > Composition tab > Select Overlay Images > Media Source drop down menu. Although “Manual Feed” is listed as a choice of medi...

Page 11 - The algorithm for the Image Overwrite feature is:

11 Disk Image Overwrite Overview The Disk Image Overwrite feature has two operations: Immediate and On Demand. The immediate operation overwrites image data on the hard drive immediately after it is no longer needed (i.e. When the page has printed). The On Demand operation cleans the entire disk. Bo...

Page 13 - Windows 2008 security settings and TotalAccxes

13 Windows 2008 security settings and TotalAccxes When using TotalAccxes on Windows 2008 servers, you must make some security setting changes to allow for the configuration of remote destinations. One of the following will work. Enable scripting. a. Go to Tools->Internet Options->Security b. C...

Page 14 - Could not properly build sets.; The following issues were resolved in 13.0 build 133; DWF file does not print any pages

14 Customer Issues Resolved The following issues were resolved in 13.0 build 141 Issue Description Problem Resolution Wide Format Scan System was not properly enabled for system use Proper operation of the system was not attained. Could not properly build sets. Could not scan document that exited ou...

Page 15 - Page left blank intentionally