Xantech URC-2 - Manual

Xantech URC-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – KEYPAD DESCRIPTIONS; The following are descriptions for the various keys and LED's.; Sending & Learning IR Window
Page 3 – Controllers; QUICK START; Battery Cover; Teaching Single IR Commands; the selected source) under which you wish to place an IR command.
Page 4 – Deleting Commands; Status LED; Source Key
Page 5 – PROGRAMMING DELAYS
Page 7 – Inserting a Delay; TO CLEAR
Page 8 – • Overlay #1 is used specifically when programming, as explained; The Status LED; CLONING; PGM and XFER
Page 9 – ADVANCED PROGRAMMING WITH DD4 SOFTWARE
Page 11 – The unit does not respond to any key presses.; there are some IR commands that are not learnable by the URC-2
Page 12 – SPECIFICATIONS; (Similar to Smart Pad

Loading the manual



Controllers

URC-2

INSTALLATION INSTRUCTIONS

URC-2

PROGRAMMABLE REMOTE CONTROLLER

INTRODUCTION

The URC-2 is a highly sophisticated learning remote, capable of storing single
or macro IR commands on each of 8 banks (or layers) of 48 keys. Unlike most
learning remotes, the bank (source) keys, in addition to selecting the desired
source, are capable of storing macro commands. This permits an immediate
response of the source or system to a single key press. The URC-2 will send
any required number of commands in sequences (macros) from any desired
key for control of extensive A/V systems (limited only by memory). Lighted
keypad panel comes on with any motion or key press and, to conserve batteries,
goes off after 6 seconds of inactivity. The lighted panel can also be deactivated
(and reactivated) at will, to further extend battery life.

FEATURE SUMMARY

The needs of the professional A/V installer were seriously taken into consider-
ation in the design of the URC-2, as the following features list will attest.
However, its ease of programming for basic A/V systems makes it well suited
for small systems as well.

• 8 Source (bank) keys with LED status indicators.

• Programming & battery condition LED indicator.

• 40 Function (operational) keys.

• All 48 keys illuminate for ease of night viewing.

• Auto wake-up with motion always lights up the last active Source LED.

• Auto sleep & wake-up of keypad lighting conserves battery power.

• Programming can be accomplished on the unit itself or by using Xantech's DD4 Dragon Drop-IR™

Windows

based PC program (optional).

• COM Port (RS232 compatible) permits cloning of programmed contents to other URC-2's. It also permits

transfer of programming from DD4 Dragon Drop-IR™ (optional).

• Programming system is similar to Xantech's Smart Pad

keypads.

• Programming functions include; single or sequenced (macro) commands, delays, delete and step editing

(with insert and delete).

• Additional advanced functions available only with optional DD4 Dragon Drop-IR™ software include;

tiering, cursor shift, punch, copy, paste, changeable code groups, adjustable sleep timeout, bank track
programming and PC back-up of programmed contents. Also, a Smart Pad

project may be dumped to

a URC-2 and the easily carried URC-2 then used to download the project to all desired Smart Pad

's in

the various rooms.

• Super Cap back-up preserves memory (for more than 8 hours) when changing batteries.

Fig. 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - KEYPAD DESCRIPTIONS; The following are descriptions for the various keys and LED's.; Sending & Learning IR Window

 2 URC-2 KEYPAD DESCRIPTIONS The following are descriptions for the various keys and LED's. 1 2 3 URC-2 TV VCR SAT CBL DVD TNR CD AUX POWER T/V ENTER VOL VOL CH CH PR.CH MUTE 4 5 6 7 8 9 0 PAUSE STOP REW FF INFO EXIT SEL PLAY MENU GUIDE A B C D Sending & Learning IR Window 3-Color Status LEDfor...

Page 3 - Controllers; QUICK START; Battery Cover; Teaching Single IR Commands; the selected source) under which you wish to place an IR command.

 3 Controllers URC-2 QUICK START Perform the following basic steps to begin using the URC-2 immediately. Installing Batteries 1. Turn the unit over and remove the battery cover. Press the cover Tab in the direction of the arrow on Tab and lift up. See Fig. 3. Battery Cover Tab Press in direction of...

Page 4 - Deleting Commands; Status LED; Source Key

 4 URC-2 b) If you allow more than 30 seconds to elapse between key presses, the URC-2 will automatically leave the Program Mode (enters Sleep Mode). If this occurs, simply repeat steps 3 through 5. 6. Pick another key and repeat steps 4 and 5 for all commands you wish the URC-2 to learn. 7. When f...