X10 XX36A - Manual
X10 XX36A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Page; Step 1: Hardware Installation; Step 2: Software Installation
- Page 4 – Note: If there is no picture shown in IE Browser
- Page 6 – Step 4: How to use your camera Wirelessly
Page
1
Wired/Wireless IP Camera – Model XX36A
Quick Installation Guide
(Using IE Browser)
Introduction
You can access your camera's live video feed from your web browser or through software on your computer, your tablet, or
your smart phone.
To access your camera via Ethernet, to your desktop computer - Follow steps 1 – 3.
To access your camera via Wi-Fi, to your notebook via Wi-Fi and cell-phone via Wi-Fi - Follow steps 1 – 4.
To access your camera via W-Fi, to cell-phone via 3G/4G and computer over the Internet - Follow steps 1- 4 and then see the
full owner's manual for dynamic DNS and port forwarding, or use X10 iWatchMobile Pro software (visit www.x10.com).
Once you have your camera configured, you may access your camera by either of these methods:
1. Use the ipcamsetup program on the included CD and click on your camera.
2. Once you are viewing your camera's live video, you can save the web address as a favorite. Then you can use that saved
favorite without using the ipcamsetup program each time.
3. In your web browser, type the IP address of your camera as a new web address.
4. To use a friendly name like '
mylivingroom.dyndyns.org
', see the owner's manual for how to configure your camera to use
Dynamic DNS.
5. To see your camera over the Internet, or from a cell phone through a 3G/4G connection, use iWatchMobile Pro software,
or see your owner's manual to configure your router for Port Forwarding.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 Step 1: Hardware Installation You need to set up your camera using a network cable (wired) first before you attempt to use it wirelessly. It is recommended that you set the camera up indoors first, before routing the cables through an external wall to mount it outdoors. 1. Install the Wi-...
Page 4 Note: If there is no picture shown in IE Browser If using IE browser to connect to the camera for the first time, and there is no image displayed, there will be an ActiveX prompt, please click the prompt and choose Run Add-on , refresh the IE browser, and login to the camera again, then y...
Page 6 Step 4: How to use your camera Wirelessly You should set up your camera using a network cable (wired) first before you attempt to use it wirelessly. (See Hardware Installation). 1. Make sure your router is a wireless router. 2. Make sure the Wi-Fi antenna is installed on the camera. 3. De...
