X10 MK19A - Manual

15 1 4 To install the JR21A Mouse Receiver: First shut down and turn off your PC. Unplug your mouse and plug the mouse Receiver into your PC’s mouse port (use the enclosed adapter if you have a PS/2 port). Plug your existing mouse into the socket on the Receiver. Set the switch on the Receiver to th...

1 7 1 6 When the Mouse Remote picture is displayed, moving the cursor around the screen causes programmable buttons or buttons with additional help (setup/X- 10/TV/CBL/SAT/VCR) to illuminate. Double-clicking on these buttons will allow them to be programmed or show additional help. Right-clicking on...

2 3 2 2 codes for your brand. If it still doesn’t respond, try the Code Search method on page 34. If the LED blinks rapidly when you enter the code , you may have entered an invalid code. Recheck the code in the code list and try again. If some buttons do not operate your equipment , try one of the ...

2 7 2 6 HI-Q ................................................................. 036 ............................................................................. INSTANT REPLAY ................................................ 034 ..........................................................................

3 3 3 2 4. Press and release the mode button that matches the A/V equipment you want to control. The LED blinks once. 5. Enter the 3 digit Code from the Library Code Tables. The LED turns off after the last digit entered. 6. Point the remote at your A/V component and press the POWER button. Your A/V...

3 7 3 6 H OME A UTOMATION The first thing you need to understand is that there are two different devices you need to control your house; Controllers and Modules. Any light or appliance that you want to control is plugged into a Module and that Module is then plugged into a standard AC outlet.Modules...

4 1 4 0 If you have installed the Transceiver Module (sold separately) you can control it and other X-10 modules as follows: 1. Press and release the X-10 button. 2. Use the number buttons to enter the Unit Code number of the chosen module. (You do not need to enter ‘0’ first for a single digit numb...

45 4 4   E X PA N D I N G   Y O U R  S Y S T E M   The products illustrated below represent just a few of the wide range of X-10 compatible products you can choose from to expand your Home Automation system. They are available from electrical outlets, department stores and mail order catalogs.X-10 H...

4 7 4 6  T ROUBLESHOOTING The Transceiver Module doesn’t respond to the remote: • Check the House Code of the Transceiver Module is set to A. If you have changed the Housecode on the remote (see p. 43), check that it matches the Housecode on the module. • Press the ON/OFF button on the front of the ...

4 9 4 8 Tray Icon not visible (Windows 95): • The X-10 mouse driver included with the system has not been installed, or the Mouse Remote has not been detected. Check that the driver has been installed and that all mouse connections have been made correctly. • You might have selected close from the M...

51 50 W ARRANTY   12 MONTH LIMITED WARRANTY X-10 (USA) INC. (X-10) WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. X-10 AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE X-10 PRODUCT IF...