WTI RMM-288 - Manual - manualsarea.com

Page 2 - Features; Unit Description; LED

6. S-Registers ● 7. Specifications ● 8. Customer Service ● List of Figures 1. Front Panel ● 2. The Status Screen (Defaults Shown) ● 3. 48 Volt DC Power Option ● 1. Introduction The RMM Rack Mount Data/Fax Modem is designed for applications that require a single "IndustrialStrength" modem tha...

Page 8 - Command; Xn Setting; Result Codes

I5 Nonvolatile memory (NVRAM) settings I6 Link diagnostics I7 Product configuration Mn Operates Speaker M0 Speaker always Off. * M1 Speaker On until connect. M2 Speaker always On. M3 Speaker On after dial, until connect. On Returns online O0 Returns online. * O1 Returns online and retrains. P Sets p...

Page 9 - Functions; Adaptive Dialing

1/CONNECT X X X X X 2/RING X X X X X 3/NO CARRIER X X X X X 4/ERROR X X X X X 5/CONNECT 1200 X X X X 6/NO DIAL TONE X X 7/BUSY X X 8/NO ANSWER* X X 10/CONNECT 2400 X X X X 13/CONNECT 9600 X X X X 18/CONNECT 4800 X X X X 20/CONNECT 7200 X X X X 21/CONNECT 12000 X X X X 25/CONNECT 14400 X X X X 43/CON...

Page 10 - Command Function/Options

Command Function/Options Yn Selects Power-on/Reset default configuration. * Y0 Default is profile 0 setting in NVRAM. Y1 Default is profile 1 setting in NVRAM. Zn Resets modem based on current DIP Switch settings. Z0 Resets modem to NVRAM profile selected by the Y command. Z1 Resets modem to NVRAM p...

Page 14 - Register Default Function

&W0 Modifies the NVRAM 0 template (Y0). &W1 Modifies the NVRAM 1 template (Y1). &Yn Sets break handling &Y0 Destructive, but doesn't send break. * &Y1 Destructive, expedited &Y2 Non-destructive, expedited &Zn=s Writes phone number s to NVRAM at position n (n = 0 - 3). &am...

Page 15 - Sets the duration and spacing (in milliseconds) for tone dialing.; Bit; Reset when DTR drops.

S6 2 Sets the number of seconds the modem will wait before dialing. If Xnis set to X2 or X4, S6 determines the timeout length when no dial toneis detected. S7 60 Sets the number of seconds the modem will wait for a carrier. Oftenused to select a longer duration when the modem is originating anintern...

Page 19 - Disable nonlinear coding.

S34 0 Bit-mapped register setup for 28.8 modems only. To set registers, seeinstructions for S13. Bit Value Result 0 1 Disable 8S-2D trellis encoding. 1 2 Disable 16S-4D trellis encoding. 2 4 Disable 32S-2D trellis encoding. 3 8 Disable 64S-4D trellis encoding. 4 16 Disable nonlinear coding. 5 32 Dis...

Page 20 - Customer Service; WTI Customer Service

Status/Help: Status display shows current settings and stored numbers. A Help display summarizes thecommand set and S-Register functions. FCC Reg. No.: CJEUSA-24375-M5-E Ringer Equivalence: 0.9 B Compliance: FCC Part 68 / Part 15 Class B Temperature: 0 degrees to 50 degrees C (operating) Power: AC M...

WTI RMM-288 - Manual

Table of Contents:

Summary

Other WTI Models