WTI PTS-9CM20-2 - Manual
WTI PTS-9CM20-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warnings and Cautions:; Installation Instructions; • Shock Hazard - Do Not Enter
- Page 3 – Hardware Installation; Apply Power to the MPC
- Page 4 – the Secondary power source is active.; FCC Part 15 Regulation; equipment; Industry Canada - EMI Information; Sterling • Irvine • California 92618
WTI Part No.: 14124
Rev.: A
PTS Series
Automatic Power Transfer Switch
Models Covered:
PTS-8NE15-1
PTS-9CM20-2
Quick Start Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Warnings and Cautions: Installation Instructions Secure Racking If Secure Racked units are installed in a closed or multi-unit rack assembly, they may require further evaluation by Certification Agencies. The following items must be considered. 1. The ambient within the rack may be greater than room...
Page 3 1. Introduction This Quick Start Guide describes the installation procedure for the PTS series hardware. The PTS is essentially a power fallback switch, that automatically switches power from a primary input to a secondary input when power to the primary input is lost or interrupted. 2. Hardw...
3. Operation When properly installed, the PTS will automatically switch power from the primary input to the secondary input when the power to the primary input is interrupted. After switching from primary to secondary, the PTS will also switch power back to the primary input when power to the primar...
