Winegard TN-2033 - Manual
Winegard TN-2033 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 3; Over The Air Activation; Wireless Connection: and
- Page 3 – Wireless; Figure 5; Home; Figure 6
- Page 4 – Figure 7; Log In; Figure 8; Ok for Activation; Figure 9
- Page 6 – Refer to the Edimax users guide CD for additional information.; WEP Key Setup; WEP; Encryption Key 1: Enter your 10 Characters Key- see chart below
- Page 7 – Parameters Default Description; Key Length; To connect your XP computer to your wireless network; Configuring the Windows XP Wireless Clients (With WEP)
- Page 8 – To connect your Windows Vista computer to your wireless network; View and connect to available wireless networks
- Page 9 – After you're connected, you can close the; Wireless Network Connection
- Page 11 – RETURN AUTHORIZATION POLICY
Ver. 1.5
4/21/2009
- 1 -
TravelNet Internet Only Cellular Router Activation Guide
Activation Instructions For Models TN-2033, and TN-2055:
Verizon TN-2055 Activation:
1.
Connect an Ethernet Cable directly to the TravelNet Cellular Router and the
Laptop.
2.
Enable the Local Area Network, when connected, go to the next step.
3.
Open a web browser (Internet Explorer, Firefox, Mozilla, Safari)
4.
Enter the IP address: 192.168.1.10
Figure 1
Figure 2
5.
Enter the user name ‘ctek’ and password ‘ctek’
6.
Click on the
Login
button.
7.
Click on the
Activation
button.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Ver. 1.5 4/21/2009 - 2 - Figure 3 8. Click on the Over The Air Activation button. 9. If Network Stability is OK For Activation ( if Not Ok for Activation, wait 3 minutes.) If Not OK for Activation for 15 additional minutes, contact Support. 10. Click the Activate button. 11. Wait 3 minutes, then che...
Ver. 1.5 4/21/2009 - 3 - 19. Click on the Status- Wireless button, and verify that there is a Current IP address. This may take several minutes depending on the carrier network. Figure 5 20. Click on the Home button. 21. Click on the Restart button and confirm by clicking the Restart button again, a...
Ver. 1.5 4/21/2009 - 4 - Figure 7 5. Enter the user name ‘ctek’ and password ‘ctek’ 6. Click the Log In button. 7. Click on the Activation button. 8. Click on the Over the Air Activation button Figure 8 9. If Network Stability is Ok for Activation then go to step 10, if Not Ok, then wait 3 minutes. ...
