Winegard GS-1100 - Manual

Winegard GS-1100

Winegard GS-1100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

90 DAY LIMITED WARRANTY

Winegard Company warrants this Winegard product against any defects in materials or workmanship

within 90 (ninety) days from date of purchase. No warranty claim will be honored unless at the time

the claim is made, you present proof of purchase to an authorized Winegard dealer (if unknown,

please contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, Telephone

800-288-8094).
Winegard Company (at its option) will either repair or replace the defective product at no charge to you.

This warranty covers parts, but does not cover any costs incurred in removal, shipping or reinstallation

of the product. This limited warranty does not apply if the product is damaged, deteriorates, malfunctions

or fails from: misuse, improper installation, abuse, neglect, accident, tampering, modification of the

product as originally manufactured by Winegard, usage not in accordance with product instructions

or acts of nature such as damage caused by wind, lightning, ice or corrosive environments such as

salt spray and acid rain.
The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all

handling and freight charges prepaid to your Winegard dealer for return to our factory for repair or

replacement. Winegard dealers will arrange for the replacement or repair and return to you without

charge the product which failed due to defective material or workmanship.
WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES,

EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE

LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.
The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or

otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial

loss, or from any other loss or damage except as set forth above.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of

limitation of incidental or consequential damages, so the above limitations or exclusions may not

apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from

state to state.

Printed in U.S.A. © 2004, 2006 Winegard Company Rev4 12-13 2451966

WINEGARD

®

SENSAR

®

TV ANTENNA

Amplified Model GS-2200

Non-amplified Model GS-1100

Made in U.S.A.

U.S. Patent No. D500,496

WARNING: INSTALLATION OF ANTENNAS NEAR POWER

LINES IS DANGEROUS. FOR YOUR SAFETY, FOLLOW THE

INSTALLATION INSTRUCTIONS.

WINEGARD CO., 3000 KIRKWOOD STREET, BURLINGTON, IA 52601-2000

NOTE: Any alteration or modification to product or any other use

of the parts other than their intended use, voids the warranty.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE POWER SUPPLY TO RAIN OR MOISTURE.

Rev. 2/08

HOW TO PROVIDE

LIGHTNING PROTECTION

FOR TV ANTENNA AND SET

Step 1.

Mount the lightning arrestor or 75

ohm coaxial grounding block as close as

possible to where the 75 ohm coaxial cable

downlead enters the house.

Step 2.

The ground wires for both the mast

and the downlead should be copper or alu-

minum wire, number eight (8) or larger.

Step 3.

The downlead wire from the

antenna to the lightning arrestor and the

mast ground wire should be secured to the

house, spaced from four (4) to six (6) feet

apart.

NOTE:

In the case of a “ground up” an-

tenna installation, it may not be necessary

to ground the mast if the mast extends four

or more feet into the earth. Consult a TV

serviceman for the proper depth in your

location.

Antenna Lead

In Wire

Ground

Clamp

Electric

Service

Equipment

Antenna

Discharge Unit

(NEC Section 810-20)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Ground

Clamps

Grounding Conductors

(NEC Section 810-21)

NEC - National Electrical Code

Example of antenna grounding as per

National Electrical Code, ANSI/NFPA 70

(May substitute a 75 ohm

Coax Grounding Block)

*

Point the front of the antenna (with Winegard logo)

at broadcast towers of stations you want to receive.

Pointing Antenna

*

Register your product at

winegard.com/myantenna

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Winegard Models

All Winegard Other