Whirlpool WRTX5028PB - Manual
Whirlpool WRTX5028PB Refrigerator – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING; Explosion Hazard; Top Mount Refrigerator
- Page 3 – Dimension; Circuit électrique :; Alimentation en eau par osmose inverse :; Réfrigérateur à congélateur inférieur
- Page 4 – AVERTISSEMENT
- Page 5 – Parte de; Refrigerador de montaje inferior; Suministro de agua por osmosis inversa:
- Page 6 – ADVERTENCIA
1
Model Number
Model
Size
Reversible
Door
Height Overall
“
A
”
Height - Top of
Cabinet
“
B
”
Depth - Door Open
90°
“
C
”
Depth - Overall
“
D
”
Depth - Cabinet
Only
“
E
”
Width - Cabinet
“
F
”
WRTX5028PW
WRTX5028PB
WRTX5028PM
WRTX5328PW
WRTX5328PB
WRTX5328PM
16.3 cu ft
Yes
66
5
/
8
" (169.2 cm) 65
3
/
8
" (166.1 cm) 56
7
/
8
" (144.5 cm) 31
7
/
8
" (81 cm)
27
5
/
8
" (70.2 cm)
28" (71.1 cm)
ELECTRICAL REQUIREMENTS
Electrical:
A 115 V, 60 Hz AC only, 15 A or 20 A fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet that
cannot be turned off by a switch. Do not use an extension cord.
NOTE:
Before performing any type of installation, cleaning, or
removing a light bulb, turn the control (Thermostat, Refrigerator
or Freezer Control depending on the model) to OFF and then
disconnect the refrigerator from the electrical source. When you
are finished, reconnect the refrigerator to the electrical source
and reset the control (Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired setting. See “Using the
Controls.”
Water:
A cold water supply with water pressure between 30 psi and
120 psi (207 kPa and 827 kPa) is required to operate ice maker and
water dispenser. If you have questions about your water pressure,
call a licensed, qualified plumber.
IMPORTANT:
The pressure of the water coming out of a reverse
osmosis system going to the water inlet valve of the refrigerator
needs to be between 30 psi and 120 psi (207 kPa and 827 kPa).
Reverse Osmosis Water Supply:
If a reverse osmosis water filtration
system is connected to your cold water supply, the water pressure
to the reverse osmosis system needs to be a minimum of
40 psi to 60 psi (276 kPa to 414 kPa).
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
Top Mount Refrigerator
W11685532B
PRODUCT MODEL NUMBERS
WRTX5028PM
WRTX5028PB
WRTX5028PW
WRTX5328PW
WRTX5328PB
WRTX5328PM
B
top of
cabinet
A
overall
D
overall
E
cabinet
F
C
90
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Whirlpool WRTX5028PB
Summary
2 LOCATION REQUIREMENTS To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.25 cm) space on each side and between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator has an ice mak...
3 B Sommet de la caisse A Dimension totale D E Armoire F C 90 Dimension totale Numéro de modèle Taille du modèle Porte à sens d’ouverture réversible Hauteur totale « A » Hauteur jusqu’au sommet de la caisse « B » Profondeur avec porte ouverte à 90° « C » Profondeur – totale « D » Profondeur – armoir...
4 EXIGENCES D’EMPLACEMENT Pour obtenir une aération appropriée pour votre réfrigérateur, il est recommandé de laisser un espace de 1/2 po (1,25 cm) de chaque côté et au sommet du réfrigérateur. Laisser un espace d’au moins 1 po (2,54 cm) entre l’arrière de l’appareil et le mur (le condensateur repré...
