Whirlpool WRS311SDHM - Manual

1

S

Siid

de

e-

-B

Byy-

-S

Siid

de

e W

Wa

atte

err a

an

nd

d IIcce

e D

Diissp

pe

en

nssiin

ng

g G

Gu

uiid

de

e

A. Water dispenser paddle
B. Water dispenser spout

C. Ice dispenser paddle
D. Ice guide

TO DISPENSE WATER:

1.

Press a sturdy glass against the water dispenser paddle. Hold
the glass close to the water dispenser spout to ensure that the
water dispenses into the glass.

2.

Remove the glass to stop dispensing.

IMPORTANT:

The small tray at the bottom of the dispenser is

designed to catch small spills and allow for easy cleaning. There is
no drain in the tray.

TO DISPENSE ICE:

Ice dispenses from the ice maker storage bin in the freezer when
the dispenser paddle is pressed. To turn off the ice maker, see the
“Ice Maker and Storage Bin” section in the Owner’s Manual.

Your ice maker can produce both crushed and cubed ice. For
crushed ice, cubes are crushed before being dispensed. This may
cause a slight delay when dispensing crushed ice. Noise from the
ice crusher is normal, and pieces of ice may vary in size. When
changing from crushed to cubed, a few ounces of crushed ice will
be dispensed along with the first cubes.

Before dispensing ice, select which type of
ice you prefer.

Crushed:

Press the Crushed button for

crushed ice.

Cubed:

Press the Cubed button for cubed

ice.

1.

Press the Crushed or Cubed Ice button to select the desired
type of ice.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

2.

Press a sturdy glass against the dispenser paddle. Hold the
glass close to the ice guide to ensure that the ice dispenses
into the glass.

IMPORTANT:

You do not need to apply a lot of pressure to the

paddle in order to activate the ice dispenser. Pressing hard will
not make the ice dispense faster or in greater quantities.

3.

Remove the glass from the dispenser paddle to stop
dispensing.