Whirlpool WFWDC96 - User Manual

6 DAILY USE 1. LOADING LAUNDRY. • Prepare the laundry, following the recommendations given in the section “HINTS AND TIPS”. - Open the door and load the laundry into the drum, without exceeding the maximum load capacities indicated in the Programme Chart . • Close the door, pressing until the latch ...

8 RULES FOR SEPARATING LAUNDRY • Fabric type / indications on label (cotton, mixed fibres, synthetic, wool, handwash items) • Colour (separate coloured garments from whites, wash new coloured items separately) • Size (wash items of different sizes in the same load to improve washing efficacy and wei...

9 EN PROGRAMME CHART The cycle duration indicated on the display or in the manual is an estimated time calculated for standard conditions. The actual cycle time may vary in relation to a number of different factors, such as inlet water temperature and pressure, ambient temperature, quantity of deter...

11 EN CLEANING AND MAINTENANCE CLEANING THE WASHER DRYER EXTERNALLY Clean the washer dryer's external parts using a soft damp cloth. Do not use generic detergents, glass detergents, abrasive powders, or other similar products to clean the control panel, as these could damage the printed elements. WA...

12 Periodically check the integrity of the water intake hose. If it is found to be damaged, contact Customer Support or an authorised dealer in order to obtain a replacement hose. Based on the type of hose: If the water intake hose has a transparent cover, periodically check to make sure that there ...

13 EN CLEANING THE FILTERS IN THE WATER INTAKE HOSE 1 . Close the water tap and unscrew the intake hose. 1 2 2 . Thoroughly clean the mesh filter at the end of the hose using a brush. 3 . At this point, manually unscrew the intake hose from the back of the washer dryer. Using pliers, extract the mes...

14 CLEANING THE DETERGENT DISPENSER 1. Remove the detergent dispenser by pressing the release button and pulling on the dispenser at the same time. 1 2 2. Remove the insert from the fabric softener compartment. 3. Wash the components under running water, taking care to remove all the detergent and f...

15 EN WARNING Make sure that the washer dryer has been shut off and disconnected from its electrical power supply before cleaning the water filter or draining the residual water.If a high temperature wash programme has recently been used, wait for the water to cool before draining it. The water filt...

17 EN TRANSPORT AND HANDLING 1. Disconnect the electrical plug and close the water tap. 2. Check to make sure that the door and the detergent dispenser are securely closed. 3. Disconnect the intake hose from the water tap, then disconnect the drain hose. Eliminate all the residual water from the hos...

18 TROUBLESHOOTING The washer dryer may sometimes not work properly for certain reasons. Before calling the Support Centre, it is recommended to check to see if the problem can be easily resolved using the following list. Anomalies: Possible causes / Solution: The washer dryer does not turn on. • Th...