Whirlpool SKT60M Installation Manual

Page 1 - SKT60 Trim Kit Installation Overview

Installation instructions for the SKT60 trim kit, including line drawings of a double-door refrigerator with the trim kit installed.

Page 2 - Manual Safety Information and Table of Contents

Table of contents, safety information for installation, definitions of DANGER and WARNING symbols, and California Proposition 65 warnings.

Page 3 - Installation Requirements and Parts List for Trim Kit

Requirements for installing the SKT60 trim kit, including planning, opening dimensions, required tools, and a parts list with part numbers.

Page 4 - Electrical Safety and Top Grille Assembly

Electrical safety warnings and grounding requirements for refrigerators/freezers, part identification diagrams, electrical connection specifications, and assembly steps for the top grille sections.

Page 5 - Assembling the Top Grille and Trim Assembly

Instructions for preparing openings, attaching side rails, securing the top trim mount, and alignment procedures for the top grille and trim assembly.

Page 6 - Fastening Trim to Openings and Weight Warnings

Instructions for fastening the top and side trim to an opening, including safety warnings regarding tipping hazards and excessive weight during installation.

Page 7 - Refrigerator and Freezer Positioning and Leveling

Instructions for installing leveler legs, safely moving appliances into place, installing the top plate, and warnings about weight, electrical shock, and tipping risks.

Page 8 - Installing Grille and Gap Filler Assembly

Steps for aligning and securing the top plate, installing grille clips, fitting a gap filler between appliances, installing the bottom grille assembly, and surface care instructions.

Page 9 - Frame Installation Safety and Specifications

Safety warnings and installation requirements for the frame, definitions of safety symbols, California Proposition 65 warnings, and required opening dimensions.

Page 10 - Frame Assembly Parts and Components

Necessary tools and provided parts for assembling the frame, including a labeled diagram of components and a parts list with descriptions and part numbers for stainless steel and white pieces.

Page 11 - Electrical Requirements and Upper Grille Assembly

Electrical specifications requiring a 115-volt, 60 Hz, 3-prong grounded outlet with appropriate fuses, warnings against using extension cords, and step-by-step instructions for assembling the upper grille.

Page 12 - Upper Grille and Frame Assembly Procedure

Instructions for aligning extrusions, securing components with screws, preparing openings, marking holes, and diagrams illustrating the assembly steps for the upper grille and frame structure.

Page 13 - Positioning and Securing Refrigeration Units

Steps for attaching top and side frames to wall openings, including safety warnings regarding tipping risk and excessive weight management.

Page 14 - Leveling Legs Installation and Appliance Movement

Guidance on removing base plastic, installing leveling legs, positioning the units, and safety warnings emphasizing multiple personnel required for handling to prevent injury or damage.

Page 15 - Refrigerator Electrical Mounting and Shelf Installation

Instructions for electrical safety, mounting the upper plate, connecting the appliance to a grounded outlet, adjusting alignment, and securing components with specific screws for the lower shelf assembly.

Page 16 - Gasket Installation and Surface Cleaning

Instructions for installing a magnetic gasket between the refrigerator and freezer, proper alignment, securing grille brackets, and cleaning procedures for frames and grilles using mild detergent.

Page 17 - Frame Installation Safety and Dimensional Requirements

Safety warnings and installation requirements for the frame, definitions of safety symbols, California Proposition 65 warnings, and required cavity dimensions for installation.

Page 18 - Vertical Blind System Installation Details

Diagrams showing component dimensions and labels, a list of necessary tools, parts list with descriptions and part numbers, and notes on adapting the system to different opening heights.

Page 19 - Upper Grille Assembly and Electrical Safety

Electrical safety requirements including grounding, assembly instructions for the upper grille, and diagrams showing how to insert side trim pieces and attach the grille to the base.

Page 20 - Ceiling Grid System Installation

Step-by-step guidance with diagrams for aligning and securing the upper grid and its side trim components, and a warning about potential damage from falls.

Page 21 - Refrigerator and Freezer Frame Fixing

Instructions for installing and aligning the upper and side trim panels using Phillips screws, along with safety warnings regarding tipping risk and excessive weight.

Page 22 - Appliance Positioning and Leveling Procedures

Instructions for removing base grilles, installing leveling feet, safely moving appliances, and specific steps for positioning the first appliance and installing spacers to ensure floor protection.

Page 23 - Second Appliance Installation Steps

Instructions for installing a second appliance and its upper and lower panels, including safety warnings regarding electrical shock risk and component alignment procedures.

Page 24 - Magnetic Door Seal and Cleaning

Instructions for installing the magnetic door seal between the refrigerator and freezer, alignment steps with diagrams, and methods for cleaning the gasket and grille.