Page 2 - lis; TABLE OF CONTENTS
E n g lis h TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS....................................................................i DIGITAL TELEVISION TRANSITION NOTICE ........................... 1 ENERGY STAR DISCLAIMER ..................................................... 1 IMPORTANT INFORMATI...
Page 3 - ii
E n g lis h TABLE OF CONTENTS POWER CONNECTION ............................................................. 20 CONNECTING AC POWER................................................... 20 INITIAL SETUP ...................................................................... 20 ANTENNA OR COAXIAL CABLE C...
Page 4 - DIGITAL TELEVISION TRANSITION NOTICE; This Westinghouse product has earned the ENERGY STAR
E n g lis h DIGITAL TELEVISION TRANSITION NOTICE DIGITAL TELEVISION TRANSITION NOTICE This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12...
Page 5 - IMPORTANT INFORMATION
E n g lis h E n g lis h IMPORTANT INFORMATION IMPORTANT INFORMATION War nings To reduce the risk of fire or electric shock: • Do not expose this product to rain or moisture. • Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified serv...
Page 6 - C o r d Typ e
E n g lis h IMPORTANT INFORMATION NOTICES Important Notices Concerning Power Cord Selection The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it...
Page 7 - • Reorient or relocate the receiving antenna.; FCC Warning
E n g lis h IMPORTANT INFORMATION FCC COMPLIANCE STATEMENT This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa...
Page 9 - Never cover the slots and openings with a cloth or other materials.
E n g lis h IMPORTANT INFORMATION Cir cuit Over load Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock. Power Cor d Pr otection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon ...
Page 11 - Outdoor Antenna Grounding; Lightning; DO NOT; disconnect the antenna or the power cord during; Power lines
E n g lis h IMPORTANT INFORMATION ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code...
Page 12 - • Make sure the LED TV is turned off and the power cord is; To clean the screen; Dolby License Notice; is a trademark of SRS Labs, Inc. TruSurround HD technology is; Licensing and Patent Infor mation
E n g lis h IMPORTANT INFORMATION CLEANING THE LED TV • Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case. To clean the screen : 1 W ipe the screen with a clean, soft, lint-free cloth. Th...
Page 13 - PACKAGE CONTENTS
E n g lis h PACKAGE CONTENTS PACKAGE CONTENTS 32 ” LED TV Unit Remote Control (with 2x AAA batteries) LED TV Base User Manual Power Cord / Cable tie Warranty Card AC Adapter Quick Connect Guide Screws for Base Screw for Base 10
Page 14 - CONTROL PANEL; I te m; Toggles the power on and off.
E n g lis h CONTROL PANEL CONTROL PANEL I te m D es c ri p ti on 1. Power Toggles the power on and off. 11
Page 15 - TERMINALS; I t em; connection as shown below:
E n g lis h TERMINALS TERMINALS I t em F u nc t io n 1. DC in Connects the AC to DC adapter from this outlet to a power source. 2. Coax out Connects to an external digital audio receiver. 3.Component in Connect to an external YPbPr device such as a VCR, DVD player, set-top box, or game system. 4. CV...
Page 16 - REMOTE CONTROL
Page 17 - REMOTE CONTROL OPERATION; INSTALLING THE REMOTE CONTROL BATTERIES; C AU T I O N S; may pose a fire risk or lead to personal injury.; REMOTE CONTROL TRANSMISSION RANGE
REMOTE CONTROL OPERATION REMOTE CONTROL OPERATION INSTALLING THE REMOTE CONTROL BATTERIES C AU T I O N S : • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to the ...
Page 18 - LED TV BASE; INSTALLING THE LED TV BASE
E n g lis h LED TV BASE LED TV BASE C AU T I O N : Th e LE D TV u ni t ma y b e to o h ea vy f o r on e pe rs o n t o lift . I f th is is th e c ase , m ak e su r e to a sk fo r a ssi sta nc e in ha nd li n g th e LE D TV t o p r eve nt p h ys ic al i nj ur y a nd /o r d amag e to t he u ni t. INSTA...
Page 20 - ANTENNA CONNECTION; OUTDOOR ANTENNA CONNECTION
E n g lis h ANTENNA CONNECTION ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION Cable TV lead in VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) 300 ohm twin-lead (flat) 300-75 ohm ADAPTER (Not supplied) RF IN Separate VHF/UHF Antenna VHF Antenna UHF Antenna 300 ohm twin-lead COMBI...
Page 21 - EXTERNAL DEVICE CONNECTIONS
EXTERNAL DEVICE CONNECTIONS • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys. EXT...
Page 22 - The following diagram shows the external device connections.
E n g lis h EXTERNAL DEVICE CONNECTIONS The following diagram shows the external device connections. 19 t Audio amplifier AUDIO OUT Audio cable Home video game system Camcorder VCR Digital TV tuner DVD player Composite AV cable CVBS (AV) cable Speaker Antenna /Cable system Audio cable Antenna cable ...
Page 23 - POWER CONNECTION; CONNECTING AC POWER; Connect the adapter to the LED TV then to a proper AC outlet.; INITIAL SETUP; Yes; to use the SetupWizard. The SetupWizard will
POWER CONNECTION POWER CONNECTION CONNECTING AC POWER I M P O R TAN T: Th e L E D TV i s des ig ne d to b e p o we re d vi a an A C adap t er. Us e O N LY t he A C a d ap te r in clu d ed i n th e pac kag e . Tu r n o ff al l c on nec te d d e vice s b ef o re p l ug gi ng t he A C ad ap te r i nto ...
Page 24 - POWER CONNECTIO; Select Language
POWER CONNECTIO ANTENNA OR COAXIAL CABLE CONNECTION SETUP Select Language Use the up and down arrows on your HDTV control panel or remote control to select the language to be used for menus and messages. Press Enter to continue. Time Zone Use the up and down arrows on your HDTV control panel or remo...
Page 25 - Select Channel Scan Type; Antenna users selecting to scan; Antenna Channel Access Information
E n g lis h POWER CONNECTION Select Channel Scan Type Use the up and down arrows on your HDTV control panel or remote control to select the channel scan type. Press Enter to continue. Press Go Back to return to the previous screen. NOTE: Antenna users selecting to scan Over- the-Air ATSC channels ne...
Page 28 - Cable/Satellite Box Input; Press Go Back to return to the previous
E n g lis h POWER CONNECTION Cable/Satellite Box Input Use the up and down arrows on your HDTV Control panel or remote control to select the input connected to the set top box. Press Enter to continue. Press Go Back to return to the previous Screen. 25
Page 30 - Select Input Source
E n g lis h POWER CONNECTION Select Input Source Use the up and down arrows on your HDTV control panel or remote control to select the input source. Press Enter to continue. Press Go Back to return to the previous screen. 27
Page 31 - BASIC OPERATIONS; TURNING THE POWER ON AND OFF; Turns from none to red.
E n g lis h E n g lis h BASIC OPERATIONS BASIC OPERATIONS TURNING THE POWER ON AND OFF Turning on the power Press on the control panel or on the remote control to turn on the LED TV. Turning off the power Press on the control panel or on the remote control to turn off the LED TV. The LED behavior wi...
Page 32 - Using the Ch; SELECTING THE INPUT SOURCE; Using the Individual Input Keys
E n g lis h BASIC OPERATIONS CHANGING CHANNELS Follow the instructions below to change channels. Using the Ch / Buttons Browse channels To browse through the available channels, press Ch on the remote control or on the control panel. Using the Channel Keys Selecting channel To change to a certain ch...
Page 33 - Using the Input Key; ADJUSTING THE DISPLAY FORMAT
E n g lis h BASIC OPERATIONS Using the Input Key Select source using Input Key 1 Press Input . 2 A list of supported video sources is displayed. 3 Press / to select the preferred source. 4 Press to switch to the selected input source. ADJUSTING THE DISPLAY FORMAT The input source can sometimes affec...
Page 34 - SETUP MENUS; SETUP MENU OPERATION; Displaying the setup menu screen; Press; MENU; on the control panel to display the setup; Navigating the setup menu screen
E n g lis h HD MI 1 H DM I 2 SETUP MENUS SETUP MENUS SETUP MENU OPERATION Use the setup menus to configure the various operational settings of the LED TV. Displaying the setup menu screen Press on the remote control or MENU on the control panel to display the setup menu screen. Navigating the setup ...
Page 35 - Brightness
SETUP MENUS PICTURE Use the Picture sub-menus to configure the display quality. Press on the remote control or MENU on the control panel to display the setup menu screen then select Picture to display the Picture sub-menu. The following options are available: Brightness, Contrast, Saturation, Video ...
Page 36 - Saturation
SETUP MENUS Saturation Use Saturation to adjust the color intensity. Adjusting Saturation 1 Use the / keys to select Saturation and press . 2 Press the / keys on the remote control to adjust the saturation level. 3 Press to save and exit the screen. Video Presets Use this sub-menu to select one of f...
Page 37 - Sharpness
SETUP MENUS Adjusting Video Presets 1 Use the / keys to select Video Presets and press . 2 Press the / keys on the remote control to select the desired option. 3 Press to save and exit the screen. Sharpness Use Sharpness to adjust the sharpness or softness of the display. Adjusting Sharpness 1 Use t...
Page 38 - Adjusting Color Temperature; Hue; Adjusting Hue; Reset
E n g lis h SETUP MENUS Adjusting Color Temperature 1 Use the / keys to select Color temperature and press . 2 Press the / keys on the remote control to select the desired option. 3 Press to save and exit the screen. Hue Use Hue to adjust the balance of the red, green, and blue colors in the display...
Page 39 - Bass
E n g lis h SETUP MENUS AUDIO Use the Audio sub-menus to configure the audio quality. Press on the remote control or MENU on the control panel to display the setup menu screen then select Audio to display the Audio sub-menu. The following options are available: Bass, Treble, Balance, SS 3D, TV Speak...
Page 40 - Balance; SRS TruSurround HD Settings
E n g lis h SETUP MENUS Balance Use Balance to adjust the sound balance between the L/R speakers. Adjusting Balance 1 Use the / keys to select Balance and press . 2 Press the / keys on the remote control to adjust the balance level. 3 Press to save and exit the screen. SRS TruSurround HD Settings Us...
Page 41 - TV Speaker
E n g lis h SETUP MENUS TV Speaker Use this sub-menu to toggle the LED TV speakers on and off. Adjusting TV Speaker 1 Use the / keys to select TV Speaker and press . 2 Press the / keys on the remote control to select ON or OFF . 3 Press to save and exit the screen. Audio Preset Use this sub-menu to ...
Page 42 - Adjusting Audio Preset
E n g lis h SETUP MENUS Adjusting Audio Preset 1 Use the / keys to select Audio Preset and press . 2 Press the / keys on the remote control to select the desired option. 3 Press to save and exit the screen. Reset Select Yes on this sub-menu to reset all audio-related settings. 39
Page 43 - Standard; Adjusting View Mode
E n g lis h SETUP MENUS VIEW MODE Use the View Mode sub-menu to select the aspect ratio of the display. Press on the remote control or MENU on the control panel to display the setup menu screen then select View Mode to display the View Mode sub-menu. The following options are available: Standard, Fi...
Page 44 - TV Program; Use Skip List to select the channels you want to skip.
E n g lis h SETUP MENUS TV PROGRAM Use the TV Program sub-menus to manage the channel list, language sound, and to scan for available TV channels in your area. Press on the remote control or MENU on the control panel to display the setup menu screen then select TV Program to display the TV Program s...
Page 45 - Adding Channels to Skip List; Channel Edit
E n g lis h SETUP MENUS Adding Channels to Skip List 1 Use the / keys to select Skip List and press . The Channel Skip List screen appears. 2 Use the / keys to select the desired channel. 3 Press repeatedly to check (add to the Skip list) or uncheck (clear to the Skip list) the channels. 4 Repeat st...
Page 47 - MTS; Mono
E n g lis h SETUP MENUS MTS Use MTS to select multichannel television sound. The following options are available: • Mono : Allows mono output (useful when stereo is noisy or inconsistent). • Stereo : Allows stereo sound for superior TV viewing experience. • SAP : Allows second audio program from the...
Page 48 - Auto Channel Search; Auto Search
E n g lis h SETUP MENUS Auto Channel Search Select Auto Search and press . Two options are available: • Cable : Choose this option to scan for CATV (cable TV) channels when the TV is connected using a coaxial cable connection. • Air : Choose this option to scan for Over-the-Air ATSC channels with an...
Page 49 - Manual Add; Manual Search
E n g lis h SETUP MENUS Manual Add Use Manual Add to add channels manually. Channel Add _ C t Enter: Confirm Menu: Exit Adding Channels Manually 1 Use the / keys to select Manual Search and press . The Channel Add screen appears. 2 Use the Channel keys on the remote control to enter the channel numb...
Page 50 - Settings; to display the Settings sub-menu. The following
SETUP MENUS SETTINGS Use the Settings sub-menus to configure the LED TV operational setup and view the current firmware version. Press on the remote control or MENU on the control panel to display the setup menu screen then select Settings to display the Settings sub-menu. The following options are ...
Page 52 - Closed Captions; The following options are available:
48 SETUP MENUS Closed Captions Use Closed Captions to configure the settings for closed captioning in TV programs. The following options are available: • Closed Captions : Can be set to ON or OFF . • Analog Type : Can be set to CC1 , CC2 , CC3 , CC4 , T1 , T2 , T3 , or T4 . • Digital Type : Can be s...
Page 55 - TV Rating
E n g lis h SETUP MENUS • TV Rating : Use this sub-menu to customize US TV Rating programs. R a t in g De s c ri p ti on TV-Y Suitable for young children. TV-Y7 May not be suitable for children under 7. TV-G Suitable for all audiences. TV-PG Parental guidance suggested. TV-14 Parental guidance sugge...
Page 58 - Canada French
E n g lis h SETUP MENUS 2 Use the / / / keys to select the desired rating and press repeatedly to block or unblock. 3 Press to save and exit the screen. • Canada French : Use this sub-menu to select the ratings of allowable TV programs and movies. These ratings are based on the classification catego...
Page 60 - OSD Timeout
E n g lis h SETUP MENUS OSD Timeout Use OSD Timeout to adjust the OSD duration on the screen: 10 sec, 20 sec, or 30 sec. en OSD Adjusting OSD Timeout 1 Use the / keys to select OSD Timeout and press . 2 Press the / keys on the remote control to select 10 sec , 20 sec , or 30 sec . 3 Press to save an...
Page 61 - Power Settings; • Backlight
E n g lis h SETUP MENUS Power Settings Use this sub-menu to configure power-related settings for the LED TV. The following options are available: • Backlight : Use this setting to select the backlight mode: Bright Room, Medium Room, or Dark Room. • Dynamic Contrast : Use this setting to enable or di...
Page 62 - Reset All; Select; on this sub-menu to reset all LED TV operational settings.
SETUP MENUS Reset All Select Yes on this sub-menu to reset all LED TV operational settings. Version Use this sub-menu to view the LED TV’s serial number and firmware version. 59
Page 63 - Using the Input Key to select USB; Select source using Input Key
SETUP MENUS JPEG / M-JPEG function Using the Input Key to select USB Select source using Input Key 1 Press Input . 2 A list of supported video sources is displayed. 3 Press / to select the USB source. 4 Press to switch to the selected input source. PHOTO: 60
Page 66 - WALL MOUNT OPTION; mm screws to wall mount the LED TV.; WALL MOUNT INSTALLATION REMINDERS; • Remove the LED TV base first before mounting the unit on a wall.; CAUTION
WALL MOUNT OPTION WALL MOUNT OPTION The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M6 x L12 mm screws to wall mount the LED TV. WALL MOUNT INSTALLATION REMINDERS • Remove the LED TV base fir...
Page 67 - TROUBLE SHOOTING; TROUBLESHOOTING; P r o b l em
E n g lis h TROUBLE SHOOTING TROUBLESHOOTING P r o b l em C o r r ec ti ve Ac t io n No power • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical...
Page 70 - SPECIFICATIONS
E n g lis h SPECIFICATIONS SPECIFICATIONS I t em Sp ec if ic a ti on Model Name UW32S3PW Panel Active Area (Diagonal, mm) 697.685 (H) x 392.256 (V) Resolution 1366 (H) x 768 (V) Contrast Ratio (typ) 3000:1 Response Time (typ) 6.5ms (g-g) Aspect Ratio 1.77 (16:9) Display color 16.7M Audio/Video Input...
Page 71 - so may cause damage to the LED TV.
E n g lis h SPECIFICATIONS I t em Sp ec if ic a ti on Physical Specifications Dimensions (W xHxD) With stand: 29.1” W X19” H X6.1”D Without stand: 29.1” W X17.4” H X2.25”D Weight (Net) 5.5Kg Weight (Gross) 7.14Kg NOTES: • These product specifications are subject to change without user notification. ...
