Westinghouse MT80A TILT - Manual
Westinghouse MT80A TILT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Tools Needed for Assembly; Accessories; WARNING; Table of Contents
- Page 3 – Parts List
- Page 4 – Installation to Single Wood Stud Wall
- Page 5 – Installation to Solid Concrete or Cinder Block
- Page 6 – Attaching Adapter Plate to Flat Panel Screen; FOR VESA 100 MOUNTING PATTERN:
- Page 7 – Installing and Removing Flat Panel Screen; Adjusting the Tilt Angle of the Flat Panel Screen; CAUTION
- Page 8 – PROOF OR ORIGINAL PURCHASE
Max UL Load Capacity: 80 lb (36.3 kg)
ISSUED: 01-17-06 SHEET #: 202-9091-1
Features:
• Fits 15" to 37" flat panel screens
• One-touch tilt for effortless positioning and adjustment of the screen
Installation and Assembly:
Universal Tilt Wall Mount for 15" - 37" Screens
Model:
MT80A TILT
R
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
Visit the Westinghouse Web Site at www.westinghousedigital.com
For customer care call 1-866-287-5555.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 of 8 ISSUED: 01-17-06 SHEET #: 202-9091-1 Note: Read entire instruction sheet before you start installation and assembly. Tools Needed for Assembly • stud finder ("edge to edge" stud finder is recommended) • phillips screwdriver • drill • 1/4" bit for concrete and cinder block wall • 1...
3 of 8 ISSUED: 01-17-06 SHEET #: 202-9091-1 De scription Qty Pa rt # A adapter plate 1 095-4346 B tilt assembly 1 095-0360 C Alligator® anchor 2 590-0097 D M4 x 10 mm phillips screw 4 504-9012 E M4 x 20 mm phillips screw 4 504-9020 F retaining spacer 4 590-5005 G #14 x 2-1/2" hex head wood screw...
4 of 8 ISSUED: 01-17-06 SHEET #: 202-9091-1 Installation to Single Wood Stud Wall 1 Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Basedon its edges, draw a vertical line down the stud’s center. Place tilt assembly ( B ) on wall as a temp...
