Westinghouse MT80A TILT - Manuals

5 of 8 ISSUED: 01-17-06 SHEET #: 202-9091-1 Installation to Solid Concrete or Cinder Block 1 Make sure that tilt assembly ( B ) is level, use it as a template to mark two mounting holes. Drill two 1/4"(6 mm) dia. holes to a minimum depth of 2-1/2"(64 mm). Insert anchors ( C ) in holes flush ...

6 of 8 ISSUED: 01-17-06 SHEET #: 202-9091-1 F *For screens with a holepattern in a pocket , spacers ( F ) go between adapter plate ( A ) and screen. FOR VESA ® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapterplate ( A ) to back of screen using four M4 x 10 mm screws ( D ) as s...

7 of 8 ISSUED: 01-17-06 SHEET #: 202-9091-1 Attach screen to tilt assembly ( B ). Tighten M5 x 6 mm screw ( H ) to lock screen to tilt assemby. Note: For security models, use security driver ( I ) to tighten M5 x 6 mm screws ( H ). To remove screen from mount, loosen screw ( H ) and lift screen off ...

8 of 8 ISSUED: 01-17-06 SHEET #: 202-9091-1 Limited Five-Year Warranty Westinghouse Digital Electronics warrants to original end-users of this Westinghouse display mounting product (the“Product”) that the Product will be free from defects in material and workmanship, under normal use, for a period o...