Weider WESY74090 - Manual
Weider WESY74090 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Before You Begin
- Page 5 – Assembly
- Page 6 – Frame Assembly
- Page 8 – Arm Assembly
- Page 17 – Attaching the Lat Bar to the Pulley Station; Adjustment; Changing the Weight Setting
- Page 18 – Tightening the Cables; Trouble-shooting and Maintenance
- Page 19 – Weight Resistance Chart
- Page 20 – Ordering Replacement Parts
- Page 22 – Part Identification Chart—WESY74090
- Page 26 – Part List—Model No. WESY74090
®
USER’S
MANUAL
Model No. WESY74090
Serial No.
The serial number is found in the
location shown below. Write the
serial number in the space above.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manu-
al for future reference.
Serial
Number
Decal
PATENT PENDING
QUESTIONS?
We are committed to providing
complete customer satisfaction.
If you have questions, or if there
are missing or damaged parts,
we will guarantee complete satis-
faction through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Fri., 8 a.m.–6:30 p.m. EST
(excluding holidays)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 ASSEMBLED DIMENSIONS: Height: 75 in.Width: 31 in. Length: 44 in. WeightStack Leg Lever Butterfly/PressArm Foam Roller Seat Backrest Thank you for selecting the versatile WEIDER ® 740 Weight System. The 740 offers a selection of weightstations designed to develop every major musclegroup of the body...
5 Note: This introduction will save you moretime than it takes to read it! Identifying Parts To help you identify the small parts used in assem-bly, we have included a PART IDENTIFICATIONCHART in the centre of this manual. Place the charton the floor or work table and use it to quickly identi-fy dif...
6 Frame Assembly 1. Before beginning assembly, make sure you haveread and understood the information on page 5. Locate and open the parts bag labeled “FRAMEASSEMBLY.” Press a 1 1/2” Square Outer Cap (27) onto each endof the Stabilizer (5) and place it on the floor asshown. Press a 1 1/2” Square Oute...
