Weber 2200 Series - Manual
Weber 2200 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Assembly; Supplies needed
- Page 3 – Installation of catch pan holder into bottom tray
- Page 4 – Removal of LP Tank; Remove grill from lower packaging
- Page 5 – Install Lid; Install Weber Warm-Up Basket
- Page 6 – Check that items are secured; Fill LP tank; Remove control panel
- Page 8 – Connect filled LP tank
- Page 9 – Check for gas leaks; DANGER; Do not use an open flame to check; Put the control panel back on
- Page 11 – Parts List
- Page 12 – A F; INAL
®
®
WARNING: Do not try to light this
appliance without reading "Lighting"
instructions section of this manual.
THIS GAS APPLIANCE IS DESIGNED FOR
OUTDOOR USE ONLY.
NOTICE TO INSTALLER: These
instructions must be left with the owner
and the owner should keep them for
future use.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, immediately call
your gas supplier or your fire
department.
WARNING: Follow all leak check
procedures carefully in this manual prior
to barbecue operation. Do this even
though the barbecue is assembled.
FOR YOUR SAFETY
1. Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
2. An LP tank not connected for use shall
not be stored in the vicinity of this or any
other appliance.
PLATINUM
™
2200 Series
LP Gas Barbecue
Step-By-Step Instructions
8776601 12/94
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Step 2 Remove packaged parts Remove and unpackage warming rack, Weber Warm-UpBasket, 2 cooking grates, cardboard box (which containscookbook and warranty card), 8 short stainless steelFlavorizer Bars and 5 long stainless steel FlavorizerBars. Note - Be sure no packaging material is left in thecook...
3 Step 3 Reinstallation of Stainless Steel FlavorizerBars, Cooking Grates and Warming Rack Set the long stainless steel Flavorizer bars side to sidein the lower position of the cooking box, then set theshort stainless steel Flavorizer bars, front to back in theupper position. Figure 3. Set the cooki...
4 Step 5 Removal of LP Tank Note - You must remove tank and it's packaging beforelifting grill out of lower carton. 1) Loosen tank lock wing nut and turn tank lock up out of the way. Tighten wing nut. Figure 8 (a). 2) Lift tank straight up. The cardboard sleeve will come with it, then remove the sle...
