Weber 2200 Series - Manuals

5 Step 7 Install Lid Remove hinge pins and hair pin cotters from back ofcooking box. Set the lid in place. Align the hinges at the rear of thebarbecue. Insert hinge pins from the outside. Insert hairpin cotters into the small holes in the hinge pins.Figure 10. Remove tape securing the thermometer in...

Step 12 Check that items are secured Note - Although the following items were factoryassembled, check that they have not loosened duringshipping and handling. Remove the tape from the manifold bracket. Check that the bracket is securely hooked onto theframe brace and under the manifold at the center...

8 Step 13 Connect filled LP tank WARNING: Make sure that the LP tank valve isclosed. Close by turning clockwise. Hook the LP tank onto the fuel scale. Loosen the tanklock wing nut. Swing the tank lock down. Tighten thewing nut. Figure 18. F E Figure 18 Tank lock wing nut Remove the tape from the hos...

9 Step 14 Check for gas leaks WARNING: You should check for gas leaks everytime you disconnect and reconnect a gas fitting. Note - All factory made connections have beenthoroughly checked for gas leaks. The burners havebeen flame tested. As a safety precaution you shouldrecheck all fittings for leak...

11 Parts List All items are single quantities unless otherwisespecified. Parts can be ordered directly from Weber-StephenProducts Company by phone or mail. Note - Do not return parts to Weber-Stephen ProductsCo. without first contacting the Customer ServiceCenter by phone or mail. Returning the part...

A F INAL W ORD OF T HANKS hank you for choosing a Weber Barbecue. Our family here at Weber has worked hard to produce the highest quality products for your satisfaction. While we give much attention to our products, an occasional error may occur. Our knowledgeable Customer Service staff is prepared ...