Wayne WSA120 - Manual

Wayne WSA120 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Operation; tEStING; is working. If the green light is flashing; Installation
Page 3 – For additional transmitters call; CODE CONNECtORS; each circuit can be positioned 3 ways.; zONE CONNECtORS; Please follow table a to set the zone.; tAblE A; zONE
Page 4 – Operating Instructions and Parts Manual; Limited Warranty; MuSt; troubleshooting; Symptom; Incorrect frequency setting
Page 5 – Manuel de pièces et mode d'emploi; Pour de l'information sur les pièces, les produits; Système
Page 6 – fonctionnement; tESt
Page 7 – CONNECtEuRS À CODE; CONNECtEuRS DE zONE; CONNECTEURS; tAblEAu A
Page 8 – Garantie Limitée; fAut; Dépannage; Symptôme
Page 9 – Manual de instrucciones de funcionamiento y piezas de repuesto; Sistema inalámbrico de; Instalación; Descripción; Desempaque; Medidas de seguridad
Page 10 – funcionamiento; PRuEbA
Page 11 – CONECtORES DE CÓDIGO; CONECtORES DE zONA; Vuelva a colocar la tapa superior y ahora; tAblA A; zONA
Page 12 – Garantía limitada; Diagnóstico y resolución de problemas

Loading the manual

Operating Instructions and Parts Manual

WSA120

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or

property damage! Retain instructions for future reference.

For parts, product & service information

visit

www.waynepumps.com

370700-001 3/10

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

™

Wireless Sump

Pump Monitoring System

General Safety

Information

CAlIfORNIA PROPOSItION 65

This product or

its power cord may

contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.

SAfEty GuIDElINES

Read these rules and instructions

carefully. Failure to follow these

instructions could cause serious bodily

injury and / or property damage.

All wiring must be

performed by a

qualified electrician. The pump must be
installed in compliance with all local
codes and the National Electrical Code.

READ & fOllOW All INStRuCtIONS

SAvE thESE INStRuCtIONS

DO NOt DISCARD

Installation

Always disconnect

the power source

before attempting to install, service,

relocate or maintain the pump. Never

touch sump pump, pump motor, water or

discharge piping when pump is connected

to electrical power. Never handle a pump

or pump motor with wet hands or when

standing on wet or damp surface or in

water. Fatal electrical shock could occur.

1. Unplug the sump pump.
2. Loosen the top nut on the float switch.
3. Slide the nut out of the way on the

float switch wire (Fig. 1).

4. Slide the float switch into the

mounting bracket (Fig. 1).

Description

a Flood alert™ Wireless Sump Pump
Monitoring System is designed to notify
the home owner of an immediate
problem in the sump pit. an alarm will
sound and a light will flash indicating
that the water level has risen within the
sump pit, and could potentially overflow.

unpacking

after unpacking the unit, carefully
inspect for any damage that may have
occurred during transit. Check for
loose, missing or damaged parts.
The packaging includes:

• 3V Lithium battery

• Transmitter

• Float switch assembly

• Receiver

• Transformer

• Float switch bracket

• 3 Zip ties

• Clip

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SaFeTy

and to PREVENT EQUIPMENT PROBLEMS.

To help recognize this information,
observe the following:

Danger indicates an

imminently

hazardous situation which, if not avoided,
WILL result in death or serious injury.

Warning indicates a

potentially

hazardous situation which, if not avoided,
COULD result in death or serious injury.

Caution indicates a

potentially minor

or moderate injury.

Notice indicates

important

information, that if not followed, may
cause damage to equipment.

figure 1 - Mounting float on bracket

T E C H N O L O G Y

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Operation; tEStING; is working. If the green light is flashing; Installation

2 Operating Instructions and Parts Manual www.waynepumps.com 5. Tighten the nut against the float switch bracket by hand. 6. next, remove the twist tie holding the wire bundle together. Stretch out the wire and do not allow the transmitter to fall into the sump pit. 7. The float switch should be pla...

Page 3 - For additional transmitters call; CODE CONNECtORS; each circuit can be positioned 3 ways.; zONE CONNECtORS; Please follow table a to set the zone.; tAblE A; zONE

3 WSA120 www.waynepumps.com During a flood emergency the warning beeper volume can be reduced or turned off completely. The mute button (Fig. 10) can be used to temporarily silence the alarm. Remember to turn the beeper back on after the issue in the sump pit has been resolved. OPtIONAl: ADDING ADDI...

Page 4 - Operating Instructions and Parts Manual; Limited Warranty; MuSt; troubleshooting; Symptom; Incorrect frequency setting

4 Operating Instructions and Parts Manual www.waynepumps.com Limited Warranty For one year from the date of purchase, Wayne Water Systems ("Wayne") will repair or re place, at its option, for the original purchaser any part or parts of its Sump Pumps or Water Pumps (“Product”) found upon exa...