Watlow RUI/Gateway - Manual
Watlow RUI/Gateway – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – instance; GTW; configurator software must be used.
- Page 3 – Provide a name for the channel.
- Page 10 – word order which also represents the default
- Page 13 – Now that we know the finer details of the Modbus
- Page 14 – similar screen as shown below should be displayed.
- Page 16 – ST does not support programmable memory blocks. However, any
- Page 17 – PM Communications user manual and above as well, the enumerated
- Page 19 – PM
- Page 20 – pointer has indeed been changed to Idle
RUI/Gateway & Modbus
®
TCP
Configuration & Programming Example
Using KEPServerEX 4.0
Watlow
1241 Bundy Blvd
Winona, MN 55987
Telephone: 507-494-5656
© 2008 Watlow Electric Mfg Co 1
FM 4/08
Configuring the EZ-ZONE
®
RUI/Gateway
1.
This White Paper is not meant to be an exhaustive step-by-step discussion in configuring the
RUI/Gateway, for this work has already been done in two other published EZ-ZONE
®
user
manuals. For instance, if needing assistance in setting the RUI/Gateway IP (
I
nternet
P
rotocol)
address or if you are simply looking for general information pertaining to Modbus
®
TCP as it is
used with EZ-ZONE
®
controls
point your internet browser to the Watlow website
(
http://www.watlow.com
) and download the EZ-ZONE
®
PM Communications user manual and
or
the
EZ-ZONE
®
RUI/Gateway user manual.
2.
Prior to looking closer at the RUI/Gateway configuration prompts let’s first take a look at the
network in use.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
RUI/Gateway & Modbus ® TCP Configuration & Programming Example Using KEPServerEX 4.0 Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2008 Watlow Electric Mfg Co 2 FM 4/08 3. Some notables regarding the graphic above. In the steps that follow we are going to focus on four of...
RUI/Gateway & Modbus ® TCP Configuration & Programming Example Using KEPServerEX 4.0 Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2008 Watlow Electric Mfg Co 3 FM 4/08 9. Provide a name for the channel. 10. In this example the device driver selected will be “Modbus Ether...
RUI/Gateway & Modbus ® TCP Configuration & Programming Example Using KEPServerEX 4.0 Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2008 Watlow Electric Mfg Co 10 FM 4/08 23. The graphic below shows the default Modbus ® word order which also represents the default Modbus ®...
