Vulcan VGF-18 - Manual

Vulcan VGF-18

Vulcan VGF-18 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 3 – PLEASE KEEP THIS MANUAL FOR FUTURE USE; GENERAL; UNPACKING
  • Page 7 – TESTING THE GAS SUPPLY SYSTEM; FLUE CONNECTIONS
  • Page 8 – LIGHTING THE PILOT; OPERATION; FILL FRY TANK WITH LIQUID SHORTENING
  • Page 11 – Cleaning Stainless Steel
  • Page 12 – MAINTENANCE; FLUE
Loading the manual

VGF-18 HEAVY DUTY

GAS FRYERS

MODEL

VGF-18

ML-136401

VULCAN-HART
DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC

WWW.VULCANHART.COM

P.O. BOX 696, LOUISVILLE, KY 40201-0696

TEL. (502) 778-2791

INSTALLATION &

OPERATION MANUAL

For additional information on Vulcan-Hart or to locate an authorized parts

and service provider in your area, visit our website at www.vulcanhart.com

FORM 35638 (05-05)

MODEL VGF-18

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - PLEASE KEEP THIS MANUAL FOR FUTURE USE; GENERAL; UNPACKING

— 3 — INSTALLATION, OPERATION AND CARE OF MODELS VGF-18 HEAVY DUTY GAS FRYERS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Your Vulcan-Hart Gas Fryer is produced with quality workmanship and material. Proper installation,usage and maintenance will result in many years of satisfactory performance. ...

Page 7 - TESTING THE GAS SUPPLY SYSTEM; FLUE CONNECTIONS

— 7 — TESTING THE GAS SUPPLY SYSTEM When test pressures exceed 1 / 2 psig (3.45 kPa), the fryer and its individual shutoff valve must be disconnected from the gas supply piping system. When test pressures are 1 / 2 psig (3.45 kPa) or less, the fryer must be isolated from the gas supply system by clo...

Page 8 - LIGHTING THE PILOT; OPERATION; FILL FRY TANK WITH LIQUID SHORTENING

— 8 — LIGHTING THE PILOT 1. Turn thermostat OFF. Thermostat is located behind the door (Fig. 3). 2. Turn gas control valve knob to OFF/PILOT (Fig. 4). Wait 5 minutes for unburned gas to vent. 3. Push gas control knob in (Fig. 4). 4. While still holding knob in, light the pilot with a lit taper. Cont...

Other Vulcan Models

All Vulcan Other