Vulcan VFD90 ML-52532 - Manual

Vulcan VFD90 ML-52532 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 3 – INSTALLATION; UNPACKING; Do not use the door or its handle to lift or move the fryer.; LOCATION; Vulcan fryers must be installed in accordance with:; In the United States; on fryers carrying more than 80 amps.
Page 4 – Bring conduit containing the proper supply wire to the fryer.; ELECTRICAL DATA CHART; LEVELING; Countertop models must be placed on a level surface.; BEFORE FIRST USE
Page 5 – OPERATION; Power Switch; — Turns electric power to the fryer on or off.; ON Indicator Light; — Controls temperature of oil in tank. Temperature range is 0-400; Automatic Basket; raise. Timer range is from 0 to 15 minutes.; Ball Pull Rod; out. Lowers elements into tank when pushed in.
Page 8 – FRYING; Fill frying baskets half full. Do not overfill baskets.; TURNING THE FRYER OFF; To turn the fryer OFF, place the ON-OFF switch to the OFF position.; Extended Shutdown; behind the lower panel on countertop models.
Page 9 – DAILY FILTERING; Models VF2/VMF2 and VF2D/VMF2D are equipped with a
Page 12 – MAINTENANCE; LUBRICATION

Loading the manual

FORM 30916 (1-95) (Formerly F-114555 & F-114556)

VF SERIES ELECTRIC FRYERS

MODEL

VF1

ML-52913

VMF1

ML-52914

VF2

ML-52915

VMF2

ML-52916

VF90

ML-52917

VFD90

ML-52532

VF1D

ML-52538

VMF1D

ML-52539

VF2D

ML-52542

VMF2D

ML-52543

V U L C A N - H A R T C O M P A N Y , P . O . B O X 6 9 6 , L O U I S V I L L E , K Y 4 0 2 0 1 - 0 6 9 6 , T E L . ( 5 0 2 ) 7 7 8 - 2 7 9 1

INSTALLATION &

OPERATION MANUAL

VF1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - INSTALLATION; UNPACKING; Do not use the door or its handle to lift or move the fryer.; LOCATION; Vulcan fryers must be installed in accordance with:; In the United States; on fryers carrying more than 80 amps.

— 3 — INSTALLATION Before installing the fryer, verify that the electrical supply agrees with the specifications on the fryerdata plate which is located on the inside of the door panel on floor model fryers and on the lower frontcover on countertop models. UNPACKING Immediately after unpacking the f...

Page 4 - Bring conduit containing the proper supply wire to the fryer.; ELECTRICAL DATA CHART; LEVELING; Countertop models must be placed on a level surface.; BEFORE FIRST USE

— 4 — 1. Bring conduit containing the proper supply wire to the fryer. On VF1/VMF1 and VF1D/VMF1D, bring the conduit in through the clearance hole in the back andterminate on the terminal block housing mounted in the back of the breaker box. On VF2 and VF2D, terminate the field supply conduit on the...

Page 5 - OPERATION; Power Switch; — Turns electric power to the fryer on or off.; ON Indicator Light; — Controls temperature of oil in tank. Temperature range is 0-400; Automatic Basket; raise. Timer range is from 0 to 15 minutes.; Ball Pull Rod; out. Lowers elements into tank when pushed in.

— 5 — OPERATION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING,CLEANING AND SERVICING THE FRYER. CONTROLS — MODELS VF1/VMF1 and VF2/VMF2 (Fig's. 1 & 2) Power Switch — Turns electric power to the fryer on or off. ON Indicator Light — (Red) Indicates electric power to the frye...