Vulcan TK65 - Manual
Vulcan TK65 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – The following accessories should be packaged in the fry tank area:
- Page 4 – LOCATION; The fryer may be installed on combustible floors.; INSTALLATION CODES AND STANDARDS; Vulcan-Hart fryers should be installed in accordance with:; ASSEMBLY
- Page 5 – GAS CONNECTIONS; The gas supply line must be at least the equivalent of; GAS PRESSURES AND ORIFICES
- Page 6 – TESTING THE GAS SUPPLY PIPING SYSTEM; When test pressures exceed; LEVELING THE FRYER; Never make flue connections directly to the fryer.
- Page 7 – OPERATION; PRIOR TO FIRST USE
- Page 9 – possible surface corrosion.; FRYING; Heat shortening to set temperature.
- Page 10 – Turn gas valve OFF when draining or filling.; Filtering Procedure; Open the fryer door and attach the drain pipe to the drain valve.
- Page 12 – MAINTENANCE; SHORTENING MAINTENANCE
INSTALLATION &
OPERATION MANUAL
V U L C A N - H A R T C O M P A N Y , P . O . B O X 6 9 6 , L O U I S V I L L E , K Y 4 0 2 0 1 - 0 6 9 6 , T E L . ( 5 0 2 ) 7 7 8 - 2 7 9 1
FORM 30608 (Rev. A, 8-95)
TK SERIES STANDARD AND
FILTER-READY GAS FRYERS
STANDARD
FILTER-READY
MODEL
FRYER
FRYER
TK35
ML-52096
ML-52062
TK45
ML-52097
ML-52063
TK65
ML-52098
ML-52064
MODEL TK35
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
— 3 — Installation, Operation and Care of TK SERIES STANDARD & FILTER-READY GAS FRYERS KEEP THIS MANUAL FOR FUTURE REFERENCE GENERAL Vulcan-Hart TK Series Fryers are available in three different models with varying capacities: Product Lb Total Lb Model Per Basket of Product TK35 1 1 / 2 3 TK45 2...
— 4 — LOCATION The equipment area must be kept free and clear of combustible substances. Minimum clearance from combustible and non-combustible construction is 6" from the sides and 6"from the back of the fryer. There must be at least 16" clearance between the fryer and any open topflame...
— 5 — Fig. 1 If it is necessary to disconnect the restraint, turn off the gas supply before disconnection. Reconnectthe restraint before turning the gas supply on and returning the fryer to its installation position. Instructions for installing casters to the fryer are included with the casters. GAS...
