Vulcan F38303 (08/14) - Manual

G R I D D L E S & B R O I L E R S

P.O. Box 696

■

Louisville, KY 40201

■

Toll-free: 1-800-814-2028

■

Local: 502-778-2791

■

Quote & Order Fax: 1-800-444-0602

a division of ITW Food Equipment Group LLC

F38303 (08/14)

Item #

C.S.I. Section 11420

900RX SERIES

HEAV Y DUT Y GAS GRIDDLES

Model 948RX

924RX

24" w x 24" d griddle plate

936RX

36" w x 24" d griddle plate

948RX

48" w x 24" d griddle plate

960RX

60" w x 24" d griddle plate

972RX

72" w x 24" d griddle plate

STANDARD FEATURES

■

Stainless steel front, sides and front top ledge with “Cool
Bullnose” design.

■

Fully welded stainless and aluminized steel chassis frame.

■

11" low profile cooking height on 4" adjustable legs.

■

1" thick polished steel griddle plate with 12 gage,
4" stainless steel back and tapered side splashes.

■

Spatula wide 3½" grease gutter and chute is fully welded
for easier cleaning and to stop grease migration.

■

One 27,000 BTU/hr. “U” shaped aluminized steel burner for
every 12" of griddle width.

■

One embedded snap action thermostat per burner with
temperature adjust from 200°F to 550°F.

■

Large 6 quart stainless steel grease drawer (2 drawers on
60" and 72" models).

■

Heavy duty chromed thermostat knob guards.

■

One pilot safety valve for every two burners. Safety will
completely shut off gas to pilot and burners if pilot
extinguishes.

■

Manual shut-off valve for gas inlet.

■

Dual (manual/electric) ignition.

■

Bottom heat shields

■

¾" rear gas connection and gas pressure regulator.

■

120V 50/60Hz 1 Amp single phase with NEMA 5-15 USA
plug.

■

One year limited parts and labor warranty.

OPTIONAL FEATURES

Hexavalent chrome plated cooking surface.
30" deep plate.
Stainless steel stand with marine edges and casters.
Cutting board, condiment rail, plate rail and banking strip
accessories.
Full or partially grooved griddle plate.

SPECIFICATIONS

Low profile heavy duty gas griddle, Vulcan Model No._______.
Stainless steel front, sides and front top ledge. Fully welded
stainless and aluminized steel body frame. 11" low profile
cooking height on 4" legs. 1" thick polished steel griddle
plate with 12 gage, 4" stainless steel back and tapered side
splashes. Grease chute is fully welded to stop grease migration.
One 27,000 BTU/hr. “U” shaped aluminized steel burner and
mechanical snap action thermostat for each 12" of griddle
width. Chrome thermostat knob guards. Temperature adjusts
from 200° to 550° F. One pilot safety for every two burners.
Manual shut-off valve. 3½" wide stainless steel grease trough.
120V 50/60Hz 1 Amp single phase electric ignition circuit.
Plug type is NEMA 5-15 USA. ¾" rear gas connection and gas
pressure regulator.

Exterior Dimensions:

_____"w x 33" d x 15½" h on 4" legs.

CSA design certified. NSF listed.

SPECIFY TYPE OF GAS WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 3,999 FT.