VTech CS6719 - Manual

Expand your telephone system ...23 Screen messages ......................24 Frequently asked questions .....25 ECO mode ..................................28 General product care ................29 The RBRC ® seal .........................29 FCC, ACTA and IC regulations .........................30 Ca...

1 What’s in the box Your telephone package contains the following items. Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. NOTE To purchase replacement batteries or power adapters, visit our website at www.vtechphones.com or call 1 (8...

2 Overview Handset overview 1 – Handset earpiece2 – LCD display3 – MENU/SELECT • Show the menu.• While in a menu, press to select an item, or save an entry or setting. 4 – OFF/CANCEL Hang up a call.Silence the ringer temporarily while the handset is ringing.Press and hold to erase the missed call in...

3 14 – REDIAL/PAUSE • Press repeatedly to review the redial list. • Press and hold to insert a dialing pause while entering a number. 15 – VOLUME/ / • Review the directory when the phone is not in use. • Increase the listening volume during a call. • Scroll up while in a menu, or in the directory, c...

4 Display icons overview The battery icon flashes when the battery is low and needs charging. The battery icon animates when the battery is charging. The battery icon becomes solid when the battery is fully charged. The handset ringer is off. There are new voicemail received from your telephone serv...

5 Connect You can choose to connect the telephone base for desktop usage or wall mounting. NOTES Use only the power adapters supplied with this product.Make sure the electrical outlets are not controlled by wall switches.The adapters are intended to be correctly oriented in a vertical or floor mount...

6 Install and charge the battery Install the battery as shown below. NOTES Use only supplied battery.If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage. •• THIS SIDE UP THIS SIDE UP THIS SIDE UP Connect the power adapter to the telephone ba...

7 Charge the battery Place the handset in the telephone base or the charger to charge. Once you have installed the battery, the handset LCD display indicates the battery status (see the table below). NOTES For best performance, keep the handset in the telephone base or charger when not in use.The ba...

8 Before use After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. Set date and time Use the dialing keys ( 0-9 ) to enter the month ( MM ), date ( DD ) and year ( YY ). Then press SELECT . 2. Use the dialing keys ( 0-9 ) to...

9 Configure your telephone Using the handset menu Press MENU when the phone is not in use.Press or until the screen displays the desired feature menu. Press SELECT to enter that menu. To return to the previous menu, press CANCEL on the handset. To return to idle mode, press and hold CANCEL on the ha...

10 Home area code If you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the caller ID log. Press MENU when the ph...

11 Telephone Operations Make a call Press or on the handset. When you hear a dial tone, dial the number. The handset displays Unable to call if the telephone line is in use. NOTES The handset shows the elapsed time as you talk (in hours, minutes and seconds).While entering numbers, press and hold PA...

13 To access a number from the caller ID log while on a call: Press MENU . Press or to highlight Caller ID log, and then press SELECT . Press or to scroll to the desired entry.Press SELECT to dial the displayed number. To access a number from the redial list while on a call: Press REDIAL to enter th...

14 Press INT on your handset when not in use. If you have only one handset, your handset displays INT needs 2 HS . If you have two handsets, your handset displays Calling HS X . If you have three or more handsets, your handset displays Intercom to . Use the dialing keys to enter a destination handse...

15 3. From this intercom call, you have the following options: You can let the destination handset join you on the outside call in a three-way conversation. Press and hold INT on the originating handset.You can transfer the call. Press OFF , or place your handset back in the telephone base or charge...

16 Directory The directory can store up to 50 entries, which are shared by all handsets. Each entry may consist of a telephone number up to 30 digits, and a name up to 15 characters. Each handset directory is independent (for multiple handset models only). Any additions, deletions or edits made on o...

17 While entering names and numbers, you can: Press or to move the cursor to the left or right.Press DELETE to erase a digit. Press and hold DELETE to erase all digits.Press and hold PAUSE to enter a dialing pause (a p appears). Press 0 to add a space. Review directory entries Directory entries appe...

18 Speed dial You can copy up to 9 directory entries into the speed dial locations ( 0 and 2 - 9 ) so that you can dial these numbers using fewer keys than usual. The speed dial memory locations are stored in the telephone base and are shared by all handsets. Changes made to the speed dial entries o...

19 Delete a speed dial entry Press MENU when the phone is not in use.Press or to scroll to Directory , then press SELECT . Press or to scroll to Speed dial , then press SELECT . Press or , or use the dialing keys to choose the desired speed dial location, then press DELETE . The screen displays Clea...

20 -OR- Press MENU when the phone is not in use.Press or to scroll to Caller ID log , and then press SELECT twice to choose Review . The handset displays the first entry in the caller ID log.Press or to browse. NOTE You hear a double beep when you reach the beginning or end of the caller ID log. Mem...

21 Save a caller ID log entry to the directory Search for the desired caller ID log entry (see Review the Caller ID log ). When the desired entry displays, press SELECT . Press SELECT to choose To Directory . Then the handset displays Enter number . Use the dialing keys to edit the number, when nece...

22 Press or to highlight Ringer tone , and then press SELECT . Press or to sample each ringer tone.Press SELECT to save your selection. Then the handset returns to the previous menu. You hear a confirmation tone. NOTE If you turn off the ringer volume, you will not hear ringer tone samples. Handset ...

24 Screen messages Call log empty There are no caller ID log entries. Calling HS X (for models with two or more handsets only) You are calling another handset (for intercom calls). Contact deleted A directory entry is deleted. Directory empty There are no directory entries. Directory full The direct...

25 Quiet mode off The quiet mode is turned off. Quiet mode on The quiet mode is turned on. Registering... The handset registration is in progress. Ringer muted The handset ringer is muted temporarily during an incoming call. Ringer off The handset ringer is turned off. Saved Your selection has been ...

28 I subscribe to a nontraditional telephone service that uses my computer to establish connections, and my telephone doesn’t work. Make sure your computer is powered on, and your Internet is working properly.Make sure to plug your USB telephone adapter into a dedicated USB port on your computer. Do...

30 FCC, ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful inter...

31 RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when y...

32 California Energy Commission battery charging testing instructions This telephone meets the California Energy Commission (CEC) regulations for energy consumption. It is not necessary to activate the energy conserving mode during normal usage, unless you want to charge the battery only and disable...

34 ventilation adéquate; des gaz industriels (dissolvants de nettoyage, des vapeurs d’essence, etc.); une fuite de gaz naturel, etc.Ne placez que le combiné de votre téléphone près de votre oreille lorsqu’en mode de conversation.Ces adaptateurs ont été conçus pour être orientés en position verticale...

35 communications téléphoniques sans fil comme étant aussi confidentielles. Alimentation électrique: Le socle de ce téléphone sans fil doit être branché à une prise électrique fonctionnelle. La prise électrique ne doit pas être contrôlée par un interrupteur mural. Les appels ne pourront pas être eff...

37 Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities re...