VTech 6895 - Manual

STEP 1 Check package contents (mi6896/6895)

Make sure your phone’s packaging includes the following:

STEP 3 Battery installation

1. Align the t wo holes in the plug with the socket pins,

then snap the plug into place. Place the battery in the

compartment with the wires in the upper right corner.

2. Replace cover by sliding it upwards until it clicks into

place.

STEP 4 Charge the battery

1. Place the handset in the base unit/chargers.
2. Charge the battery for at least 16 hours before first use.

Quick Start Guide

mi6896/6895/6870/6866

STEP 2 C o nn e c t p owe r to t e l e p ho n e b a s e /

chargers

Plug the power adaptor into an electrical outlet not controlled

by a wall switch, and the connector into the power jack on

bottom of the telephone base/chargers.

NOTE:

• Use only the power adaptors supplied with your

VTech telephone.

STEP 5 Connect to phone line

Plug one end of the telephone line cord into the telephone line

jack at the bottom of the telephone base. Then plug the other
end of the cord into the wall telephone outlet.

AC power outlet

Telephone outlet

STEP 6 Making and receiving calls

Making a call

• Press

or

SPEAKER

and listen for dial tone.

STEP 7 Set the Clock

1. Press

TIME/SET

to listen to the current setting.

2. Press

TIME/SET

again to indicate changes needed.

3. Press

CHANGE

to change the day, hour, minute, or year.

4. When you hear the correct setting, press

TIME/SET

to

advance to the next setting.

Hanging up

Press

OFF

or place the

handset in its base.

IMPORTANT!

If your product is not working properly:

1. Refer to your user’s manual.
2. Visit our website at www.vtechphones.com or in Canada,

www vtechcanada.com.

3. Call our customer service at 1-800-595-9511 or 1-800-267

7377 in Canada.

NOTE:

If you have caller ID service, the time will automatically

be updated with the first incoming call af ter you

program the year into the system.

NOTE:

For complete feature instructions, please refer to your

user’s manual.

AC power outlet

STEP 8 Record your outgoing announcement

1. Press

SETUP

, the system announces “

Announcement.

Press

PLAY

or press

RECORD

. To continue setup, press

SETUP

.

”

2. Press

REC/MEMO

and speak toward the

MIC

on the base

to record an announcement for up to 90 seconds.

3. Press

PLAY/STOP

/

( when finished recording).

• Dial the phone number.
-OR-
• Dial the phone number.
• Press

.

Receiving a call

Press

,

SPEAKERPHONE

, or any dialing key except

OFF

.

Base unit

Handsets (4)

Telephone line cord

Base power adaptor

Quick start guide

Belt clips (4)

User’s manual

Wall mount bracket

Batteries (4)

Charger power adaptors (3)

Chargers (3)

96-006136-020-100

STEP 1 Check package contents (mi6870)

Make sure your phone’s packaging includes the following:

Base unit

Handsets (2)

Telephone line cord

Base power adaptor

Quick start guide

Belt clips (2)

User’s manual

Wall mount bracket

Batteries (2)

Charger power adaptor

Charger

STEP 1 Check package contents (mi6866)

Make sure your phone’s packaging includes the following:

Base unit

Handset

Telephone line cord

Base power adaptor

Quick start guide

Belt clip

User’s manual

Wall mount bracket

Battery