Vizio VEC1086B - Manual
Vizio VEC1086B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PERSONAL PRECAUTIONS AND SAFETY; components and may cause explosion.; POWER CORD CONNECTION; recommended charging rates.; CHARGER LOCATION; NEVER; operate charger in a restricted or non-ventilated area.; DC CONNECTION PRECAUTIONS; to reduce risk of sparking.
- Page 3 – TO REDUCE RISK OF A SPARK NEAR BATTERY:; frame or engine block.; EXPLOSION. TO REDUCE RISK OF A SPARK NEAR BATTERY:; connection while as far away from battery as practical.; NOTE
- Page 4 – INTRODUCTION AND FEATURES; FIGURE 2 - CHARGE CURVE; FEATURES; • Automatic Float Charge Monitoring.
- Page 5 – FIGURE 3; FRONT VIEW; FIGURE 3 FRONT PANEL; CONTROLS AND INDICATORS; FUNCTIONS; battery size or condition.; INDICATORS; Lights when the battery is not connected properly or not charable.
- Page 6 – : • If the battery is near full it will fall back to lower charge rate.; GENERAL BATTERY SAFETY
- Page 7 – WARNING: DO NOT ATTEMPT TO CHARGE A FROZEN BATTERY; SPECIFIC GRAVITY; and add an extra hour to charge time.; PERCENT OF CHARGE; HRS
- Page 8 – WARRANTY; specifically excluded from coverage under this warranty.; LIMITATIONS; make every effort to return it to you within four weeks.; WARRANTY ACTIVATION; along with a copy of the original sales receipt to:
SMART AUTOMATIC
BATTERY CHARGER
OWNER’S MANUAL & WARRANTY INFORMATION
12 VOLT 2/4/6 AMPERE CHARGE RATES WITH
• IMPORTANT SAFETY INSTRUCTIONS •
WARNING – RISK OF EXPLOSIVE GASES
WARNING - RISK OF EXPLOSIVE GASES
1. WORKING IN VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES
GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME BEFORE USING YOUR
CHARGER, YOU READ THIS MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY.
2. To reduce risk of battery explosion, follow these instructions and those published by the battery manufacturer
and manufacturer of any equipment you intend to use in vicinity of battery. Review cautionary markings on
these products and on engine.
GENERAL SAFETY
1. Use this charger for charging a LEAD-ACID battery only. It is not intended to supply power to a low voltage electrical
system other than in a starter-motor application. DO not use this battery charger for dry-cell batteries that are
commonly used with home appliances. These batteries may burst and cause injury to persons and damage to
property.
2. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire,
electric shock, or injury to persons.
3. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
4. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in
a risk of fire and electric shock.
If extension cord must be used, make sure:
a. Pins on plug of extension cord are the same number, size, and shape as those of plug on charger.
b. Extension cord is properly wired and in good electrical condition; and
c. Wire size is AWG#14 (14 gauge) to 100 feet and AWG#12 for distances over 100 feet.
5. Do not operate charger with damaged cord or plug - take to a qualified service technician for replacement of the
cord or plug immediately.
6. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in anyway; take it to
a qualified service technician.
7. Do not disassemble charger; contact a qualified service technician when service or repair is required. Incorrect
reassembly may result in risk of electric shock or fire.
8. To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning
off charger controls will not reduce this risk.
9. Do not operate charger in rain or snow or use when wet.
10. Never charge a frozen battery.
SAVE THESE INSTRUCTIONS:
This manual contains important safety and operating instructions for battery charger Model VEC1086B
4140 SW 28TH WAY, FT. LAUDERDALE, FL 33312 • TEL: 954-584-4446 • FAX: 954-584-5556 • TOLL-FREE 866-584-5504
VEC1086B
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 PERSONAL PRECAUTIONS AND SAFETY 1. Another person should be close enough to come to your aid when you work near a lead-acid battery.2. Fresh water and soap should be nearby in case battery acid contacts skin, clothing, or eyes.3. Wear eye protection and protective clothing. Avoid touching eyes or ...
3 FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN VEHICLE. A SPARK NEAR BATTERY MAY CAUSE BATTERY EXPLOSION. TO REDUCE RISK OF A SPARK NEAR BATTERY: 1. Position AC and DC cords/cables to reduce risk of damage by hood, door, or other moving engine parts. 2. Stay clear of fan blades, belts, pulleys, a...
4 INTRODUCTION AND FEATURES Thank you for selecting the Vector Model VEC1086B 2/4/6 AMP 12 Volt Smart Battery Charger. With proper care and use,it will give you years of dependable service. This battery charger has a high charge rate of up to 6 amps, and low chargerate of up to 2 amps. It is designe...
