Vintec V20SGES3 - User Manual
A user manual for underbench wine cabinet units from the V20 series covers essential setup requirements, including precise ventilation needs–such as minimum cutout sizes (300mm × 825mm) and grille placement–to ensure proper airflow and prevent overheating. The guide emphasizes environmental constraints, like avoiding outdoor use without adequate protection, while detailing electrical specifications for power connections, surge protection, and ambient temperature control to maintain optimal performance. Installation diagrams illustrate correct unit positioning, spacing, and mounting dimensions to avoid warranty voidance.
Table of Contents:
- Page 1 – V20 SERIES Underbench Installation and Cutout Requirements
- Page 2 – Cabinet Ventilation and Airflow Requirements
- Page 3 – Wine Cabinet Electrical Setup and Environmental Conditions
- Page 4 – Outdoor Installation Guidelines for Vintec Units
- Page 5 – V20 Range Wine Cellar Spacing and Temperature Specifications
- Page 6 – Benchtop Unit Venting and Power Point Location
- Page 7 – V20 Unit Installation Dimensions
V20 SERIES
V20SGES3
1. Cabinet dimensions:
Height 820mm (40mm adjustable feet) Width 295mm
Depth (without handle) 575mm + 30mm spacer = 605mm
Depth (with handle) 575mm + 43mm handle + 30mm spacer = 648mm
2. This cabinet is not designed to be fully integrated behind a joinery door.
3. Please note that a minimum cut out of 300mm x 825mm is required to facilitate instal-
lation, removal, ventilation and servicing.
UNDERBENCH INSTALLATION INSTRUCTIONS
These units are not designed for outdoor use – please see conditions at the end of this
information.
✓
✕
300.0
825.0
Minimum Cutout Diagram
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Vintec
- Model
- V20SGES3
- Document type
- User Manual
- Category
- Refrigerator
- Language(s)
- English
- Pages
- 7
- File size
- 435.5 KB
- Format
Summary
Installation instructions for the V20 SERIES underbench unit, including dimensions, restrictions on outdoor use, limitations regarding integration behind joinery doors, and minimum required cutout sizes for installation, removal, ventilation, and servicing.
Specifications for cabinet ventilation, including clearance dimensions, grille installation locations, airflow rules to maintain warranty, and requirements for front venting involving kick boards and minimum airflow allowance.
Requirements for electrical setup, power switch placement, required power point specifications, cord mounting, surge protector advice, and environmental conditions necessary for optimal operation of the wine cabinet.
