Page 2 - Compliance Information; FCC Compliance Statement; Industry Canada Statement
i Compliance Information NOTE: This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operatio...
Page 3 - CE Conformity for European Countries
ii CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/E...
Page 4 - TCO Information
iii TCO Information Congratulations! This display is designed for both you and the planet! CERTIFIED The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental r...
Page 5 - Declaration of RoHS Compliance
iv Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comp...
Page 6 - Cautions and Warnings
v Cautions and Warnings 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings and follow all instructions. 4. Sit at least 18” / 45cm from the LCD display. 5. Always handle the LCD display with care when moving it. 6. Never...
Page 8 - Contents
vii Contents Compliance Information FCC Compliance Statement ...................................................................................i Industry Canada Statement ....................................................................................i CE Conformity for European Countries ........
Page 9 - Copyright Information
1 Copyright Information Copyright © ViewSonic ® Corporation, 2013. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSoni...
Page 10 - Product Registration; For Your Records
2 Product Registration To fulfill possible future product needs, and to receive additional product information as it becomes available, please visit your region section on ViewSonic’s website to register your product online. The ViewSonic CD also provides an opportunity for you to print the product ...
Page 11 - Getting Started; Package Contents
3 Getting Started Congratulations on your purchase of a ViewSonic ® LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to Microsoft Windows operating system. Package Contents Your LCD display package in...
Page 12 - Quick Installation; Additional Software Installation (Optional)
4 Quick Installation 1. Connect video cable • Make sure both the LCD display and computer are turned OFF.• Remove rear panel covers if necessary.• Connect the video cable from the LCD display to the computer. Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to th...
Page 13 - Control of the Touch Function
5 Control of the Touch Function 1. Before using the touch function, make sure the USB cable is connected and the Windows 7 operating system is started. 2. When the touch function is active, make sure there is no foreign object in the areas encircled in the figure below. Make sure there is no foreign...
Page 15 - Using the LCD Display; Setting the Timing Mode
7 Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; example 60 Hz). After setting the ti...
Page 16 - Adjusting the Screen Image
8 Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. Standby Power On/Off Power light Blue = ON Orange = Power Saving [1] Displays the Main Menu or exits the control screen and saves adjustments. [2] Displays the ...
Page 17 - Main Menu Controls; Main Menu Explanation
9 Main Menu Controls Adjust the menu items by using the up ▲ and down ▼ buttons. NOTE: Check the Main Menu items on your LCD OSD and refer to Main Menu Explanation below. Main Menu Explanation A Audio Adjust adjusts the volume, mutes the sound, or toggles between inputs if you have more than one sou...
Page 19 - Other Information; Specifications
11 Other Information Specifications LCD Type Display Size Color Filter Glass Surface TFT (Thin Film Transistor), Active Matrix 1920 x 1080 LCD, 0.2715 mm pixel pitch Metric: 59.8 cm Imperial: 24” (23.6” viewable) RGB vertical stripe Glare* Input Signal Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms) H...
Page 20 - Cleaning the LCD Display
12 Cleaning the LCD Display • MAKE SURE THE LCD display IS TURNED OFF.• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If the screen still not clean, apply a small...
Page 21 - Troubleshooting
13 Troubleshooting No power • Make sure power button (or switch) is ON.• Make sure A/C power cord is securely connected to the LCD display.• Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • Ma...
Page 22 - Customer Support
14 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 [email protected]...
Page 23 - Limited Warranty
15 Limited Warranty ViewSonic ® LCD Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSoni...
Page 25 - Mexico Limited Warranty
17 Mexico Limited Warranty ViewSonic ® LCD Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, V...
