Page 2 - Compliance Information; FCC Compliance Statement
i Compliance Information NOTE: This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operatio...
Page 3 - TCO Information
ii TCO Information Congratulations! This display is designed for both you and the planet! CERTIFIED The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental re...
Page 4 - Declaration of RoHS2 Compliance
iii Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to c...
Page 5 - Cautions and Warnings
iv Cautions and Warnings 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings and follow all instructions. 4. Sit at least 18” / 45cm from the LCD display. 5. Always handle the LCD display with care when moving it. 6. Neve...
Page 7 - Contents
vi Contents Compliance Information FCC Compliance Statement ...................................................................................i Industry Canada Statement ....................................................................................i CE Conformity for European Countries .........
Page 8 - Copyright Information
1 Copyright Information Copyright © ViewSonic ® Corporation, 2013. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSoni...
Page 9 - Product Registration; For Your Records
2 Product Registration To fulfill possible future product needs, and to receive additional product information as it becomes available, please visit your region section on ViewSonic’s website to register your product online. The ViewSonic CD also provides an opportunity for you to print the product ...
Page 10 - Getting Started; Package Contents
3 Getting Started Congratulations on your purchase of a ViewSonic ® LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to Microsoft Windows operating system. Package Contents Your LCD display package in...
Page 11 - Quick Installation; Additional Software Installation (Optional)
4 Quick Installation 1. Connect video cable • Make sure both the LCD display and computer are turned OFF. • Remove rear panel covers if necessary. • Connect the video cable from the LCD display to the computer. Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to ...
Page 12 - Control of the Touch Function
5 Control of the Touch Function 1. Before using the touch function, make sure the USB cable is connected and the Windows operating system is started. 2. When the touch function is active, make sure there is no foreign object in the areas encircled in the figure below. Make sure there is no foreign o...
Page 14 - Using the LCD Display; Setting the Timing Mode
7 Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; example 60 Hz). After setting the ti...
Page 15 - Adjusting the Screen Image
8 Adjusting the Screen Image Use the buttons on the front control panel to display and adjust the OSD controls which display on the screen. Standby Power On/Off Power light Blue = ON Orange = Power Saving [1] Displays the Main Menu or exits the control screen and saves adjustments. [2] Displays the ...
Page 16 - Main Menu Controls; Main Menu Explanation
9 Main Menu Controls Adjust the menu items by using the up ▲ and down ▼ buttons. NOTE: Check the Main Menu items on your LCD OSD and refer to Main Menu Explanation below. Main Menu Explanation NOTE: The Main Menu items listed in this section indicates whole Main Menu items of all models. The actual ...
Page 17 - Power Management
10 Input Select toggles between inputs if you have more than one computer connected to the LCD display. M Manual Image Adjust displays the Manual Image Adjust menu. You can manually set a variety of image quality adjustments. Memory Recall returns the adjustments back to factory settings if the disp...
Page 18 - Other Information; Specifications
11 Other Information Specifications LCD Type Display Size Color Filter Glass Surface TFT (Thin Film Transistor), Active Matrix 1920 x 1080 LCD, 0.24825 mm pixel pitch Metric: 55 cm Imperial: 21.5” (21.5” viewable) RGB vertical stripe Anti-Glare Input Signal Video Sync RGB analog (0.7/1.0 Vp-p, 75 oh...
Page 19 - Cleaning the LCD Display
12 Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If the screen still not clean, apply a smal...
Page 20 - Troubleshooting
13 Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • ...
Page 21 - Customer Support
14 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 [email protected]...
Page 22 - Limited Warranty
15 Limited Warranty ViewSonic ® LCD Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSoni...
Page 24 - Mexico Limited Warranty
17 Mexico Limited Warranty ViewSonic ® LCD Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, V...
