Page 2 - Contents; Getting Started
E N G L I S H Contents ViewSonic N2750w 1 Product Registration.................................................................2 For Your Records.....................................................................2 Important Product Safety Instructions......................................3 Antenna...
Page 3 - Product Registration; For Your Records; Product disposal at end of product life
E N G L I S H ViewSonic N2750w 2 Copyright © ViewSonic Corporation, 2004. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks ofViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors ...
Page 4 - IMPORTANT PRODUCT SAFETY INSTRUCTIONS
E N G L I S H IMPORTANT PRODUCT SAFETY INSTRUCTIONS ATTENTION: Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety,please read all the safety and operating instructions before you operate this product follow its operating and keep this...
Page 5 - ANTENNA INSTALLATION INSTRUCTIONS; Cleaning the LCD Display
E N G L I S H ANTENNA INSTALLATION INSTRUCTIONS 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is groundedso as to provide some protection against voltage surges and built-up static charges, Article 810 of the Nation...
Page 6 - Congratulations on your purchase of a ViewSonic; Package Contents; Your LCD TV display package includes:
E N G L I S H Getting Started LCD TV DisplayRCA A/V CableAudio CableQuick Start Guide Congratulations on your purchase of a ViewSonic ® LCD TV display. Important! Save the original box and all packing material for future shipping needs. Package Contents Your LCD TV display package includes: L-Shape ...
Page 7 - Front View of the Product; Channel up when source is at TV or select a control while in OSD menu.
E N G L I S H Front View of the Product Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. ViewSonic N2750w 6 3 2 1 4 5 6 7 8 Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. MENU Turn OSD menu ON/OFF. CH Down Channel down when sour...
Page 8 - Rear View of the Product; Connect to the antenna or cable servic; Connect the external audio into this jack.
E N G L I S H ViewSonic N2750w 7 Rear View of the Product TV signal input Connect to the antenna or cable servic e. A D A B C F G E J L K O N M I H YCbCr signal input Connect the external video devices with component output to these jacks. S-Video input Connect the external video device such as VCR,...
Page 9 - Remote Control
Page 10 - Remote control button function as follow
E N G L I S H Remote control button function as follow A B C D E F G H I J K L M N O P Q R S T U V W X Y POWER button INFO button SLEEP button MTS button MUTE button C.C button Menu button POP button PIP button Picture button CH Up button SOUND button TV button Source button 0~100+ number button LAS...
Page 11 - Reattach the battery cover.; Insert Remote Control Batteries; CAUTION; Installation; Connecting with the antenna; RF Cable or Adapter
E N G L I S H ViewSonic N2750W 10 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. 1. Insert Remote Control Batteries CAUTION Only use the specified AA...
Page 12 - Connect Audio Cable; Stereo system
E N G L I S H ViewSonic N2750w 11 Connect Video/Audio cables from compatible devices into the back panel of N2750w. 4. Connect AV, S-Video, YCbCr, YPbPr, DVI to Video Devices Connect Video/Audio cables from compatible devices into the back panel of N2750w. 3. Connect Audio Cable AV model: OPTIONAL: ...
Page 17 - TV key of remote control is shortcut for TV selection.; Connect power cable; AC wall socket; AC Switch; Switch to ON
E N G L I S H 8. Select input source for your LCDTV display, via either OSD menu or Remote control The Source key of N2750w is the shortcut key for selection of input to display. TV key of remote control is shortcut for TV selection. ViewSonic N2750w 16 Connect the power cord to the N2750w then to a...
Page 18 - BASIC OPERATION; Powering the LCD TV; Enter; VOLUME Adjusting; MUTE; INFO –; INFO; Channel Select
E N G L I S H BASIC OPERATION Powering the LCD TV To operate the function of your LCD TV, you can use your remote control orthose buttons above your LCD TV to set input sources, such as OSD sources,volume adjusting, and ect. Before using the LCD TV:1. Insert the power plug.2. Connect external equipm...
Page 19 - OSD Functions; User controls and indicators; PICTURE MENU
E N G L I S H OSD Functions Source Input: TV User controls and indicators Power on /off switch To switch on the unit when first pressed, and switch off when pressing again.The monitor is used in a normal operation state. For this, there is no OSDwindows displayed on the screen unless it is turned on...
Page 20 - INPUT SELECT
E N G L I S H ViewSonic N2750w 19 BRIGHTNESS: To adjust the luminance of the image. (right: Max, left: low) CONTRAST: To adjust the contrast ratio of the image. (right: high contrast, left: low contrast) SHARPNESS: To adjust the sharpness of image. (right: sharpen, left: soften) COLOR: To adjust col...
Page 22 - PIP Screen; To select the source of the sound from main screen or sub-screen.
E N G L I S H PIP SIZE: To adjust the size of sub-screen. The function only acts on PIP. PIP POSITION: To set the position of sub-screen. This function only acts on PIP. ViewSonic N2750w 21 PIP Screen POP Screen When selecting PIP , it will show the other items to offer the adjusting function--INPUT...
Page 23 - MENU
E N G L I S H ViewSonic N2750w 22 When selecting POP, it will show the other items to offer the adjusting function—INPUT, MODE, AUDIO, and SWAP.Press MENU again of the next Menu (SETUP MENU).
Page 24 - SETUP MENU
E N G L I S H ViewSonic N2750w 23 OSD POSITION-H: To adjust the horizontal position of OSD. OSD POSITION-V: To adjust the vertical position of OSD. OSD TIME OUT: To setup the displaying time of OSD. TRANSPARENCY: To adjust the transparency of OSD. OSD COLOR: To select your favorite OSD color. LANGUA...
Page 25 - (It does not function in any other mode except in TV mode); TV MENU; SOUND MENU; To select TV signal input from TV or CATV.; EXIT
E N G L I S H (It does not function in any other mode except in TV mode) ViewSonic N2750w 24 Source Input: TV PICTURE MENU INPUT SELECT PIP/POP MENU SETUP MENU TV MENU SOUND MENU PARENTAL CONTRAL Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 MTS: The function is to provide the multi-channel TV so...
Page 30 - Enter 0000 if you have not assigned the special password.
E N G L I S H ViewSonic N2750w 29 4. Enter 0000 if you have not assigned the special password. 5. Use remote control to enter four digit numbers to set the new password.
Page 31 - How to set up TV Rating?
E N G L I S H 6. Enter the 4 digit numbers again to verify your new password, and then it will show OK on the screen, and then turn back to the Parental Control page. TV RATING GUIDE: To setup TV Rating. How to set up TV Rating? 1. Move the cursor to the item of TV RATING GUIDE. 2. Press . 3. There ...
Page 37 - How to select the input sources:; Use to move cursor bar up and down; ENTER; to input the desired item.
E N G L I S H PICTURE MENU INPUT SELECT PIP/POP MENU SETUP MENU SOUND MENU Page 1 Page 2 Page 3 Page 4 Page 5 Source Input: VGA, DVI, YPbPr ViewSonic N2750w 36 This page is to select your input sources, such as VGA, YPbPr, AV, S-VIDEO, TV,DVI, and YCbCr. How to select the input sources: Use to move ...
Page 41 - Press; To adjust the volume.
E N G L I S H Press MENU again of the next Menu (SOUND MENU ). PICTURE MENU INPUT SELECT PIP/POP MENU SETUP MENU SOUND MENU Page 1 Page 2 Page 3 Page 4 Page 5 Source Input: VGA, DVI, YPbPr VOLUME: To adjust the volume. BASS: To adjust the bass. TREBLE: To adjust the treble. BALANCE: To adjust the le...
Page 42 - Other Information; Specifications; Product Specification are subject to change without notice.
E N G L I S H ViewSonic N2750w 41 Other Information Specifications LCD Input signal Compatibility Resolution Speaker Output Audio Output Power Display area Operatingconditions Storageconditions Dimensions Weight Regulations Power savingmodes Preset Timing Mode Type Color FilterGlass surface RGB RFVi...
Page 43 - Troubleshooting
E N G L I S H Troubleshooting No power Make sure power button (or switch) is ON.Make sure A/C power cord is securely connected to the LCD TV.Plug another electrical device (like a radio) into the power outlet to verify thatthe outlet is supplying proper voltage. Power is ON but no screen image Make ...
Page 44 - Customer Support; Web site
E N G L I S H ViewSonic N2750w 43 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Contry/Region United States Canada Web site viewsonic.com/support viewsonic.com/support T = TelephoneF = FAX T: (8...
Page 45 - Limited Warranty; VIEWSONIC LCD DISPLAY
E N G L I S H Limited Warranty What the warranty covers:ViewSonic ® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warrantyperiod, ViewSonic will, at its sole option, repa...
Page 46 - Appendix; Safety Guidelines
E N G L I S H Appendix Safety Guidelines Warming: This device must be operated with the original power supply, part number: 12VDC LSE9901B1250, 12VDC UP06031120. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is prop...
Page 47 - FCC Warning
E N G L I S H ViewSonic N2750w 46 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a resi-dential installation. This equipmen...
