VEVOR NYFLQDMCCSZZ5M2QCV1 - User Manual

VEVOR NYFLQDMCCSZZ5M2QCV1

VEVOR NYFLQDMCCSZZ5M2QCV1 Milk Frother – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
Page: / 10

Table of Contents:

  • Page 2 – container below. The cream mouth can be twisted at will (PIC3)
  • Page 5 – The operation steps are as follows:; Pour about one third of the 60°C water into the milk pot container.
  • Page 6 – The Milk Fat Concentration Adjusting; according to the following steps:; milk in the milk pot container.; Cleaning Steps; The cleaning steps are as follows:; The milk pot container only needs to be removed in order and washed
  • Page 8 – Common Faults and Eliminating Methods; Fault
  • Page 9 – DC or 12V DC after voltage transformation can be used.
Loading the manual

PIC1

Milk Cream Separator Instruction

I .Product installation

The Installation steps are as follows:

1

Prepare all parts of the milk cream separator (PIC1).

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - container below. The cream mouth can be twisted at will (PIC3)

PIC2 2 Align the hole at the bottom of the container with the electric separator. The "Dong" sound when the rotary installation is tightened indicates that it has been fully installed (PIC2) 3 Press tightly and tie the skimmed milk mouth and the cream mouth to the container below. The cream ...

Page 5 - The operation steps are as follows:; Pour about one third of the 60°C water into the milk pot container.

II .Operation Steps The operation steps are as follows: 1 Pour about one third of the 60°C water into the milk pot container. 2 Put the power on and switch on the separator to make the motor work. ③ After the separator works for 1 minute, slowly turn the milk container switch(Metal Rod)anticlockwise...

Page 6 - The Milk Fat Concentration Adjusting; according to the following steps:; milk in the milk pot container.; Cleaning Steps; The cleaning steps are as follows:; The milk pot container only needs to be removed in order and washed

III. The Milk Fat Concentration Adjusting In the separation process, the milk fat concentration can be adjusted according to the following steps: ©Close the milk container switch (Meta I Rod) and continue to separate the milk in the milk pot container. ② Turn the power switch off of the separator an...