Vermont Casting WOOD STOVE - Manual

Vermont Casting WOOD STOVE

Vermont Casting WOOD STOVE – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
Page: / 14

Table of Contents:

  • Page 4 – INSTALLATION; STOVE PIPE
  • Page 5 – Floor Protector
  • Page 7 – INSTRUCTIONS FOR FIRST BURN - CURING THE STOVE PAINT; BUILDING A FIRE
  • Page 8 – GLASS CARE; GASKET REPLACEMENT
  • Page 9 – WARNING: Things to remember in case of chimney fire:
  • Page 12 – CFM Corporation
  • Page 13 – Brick Pattern
Loading the manual

OWNERS MANUAL

HIGH EFFICIENCY

AIR TIGHT WOOD STOVE

SAFETY NOTICE

IF THIS WOOD BURNING APPLIANCE IS NOT PROPERLY

INSTALLED, A HOUSE FIRE MAY RESULT.
FOR YOUR SAFETY, FOLLOW THE INSTALLATION

DIRECTIONS.
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT

RESTRICTIONS AND INSTALLATION INSPECTION

REQUIREMENTS IN YOUR AREA.
THIS UNIT IS NOT MOBILE HOME APPROVED.

SAVE THIS MANUAL FOR FUTURE REFERENCE

6" FLUE REQUIRED

made in

CANADA

CFM Corporation

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 4 - INSTALLATION; STOVE PIPE

5 INSTALLATION 1. Remove all parts from inside the stove body. 2. Select the proper location for the stove. These appliances must not be installed any closer than theminimum clearance to combustible materials shown in Figure A (on diagram sheet). The stove must beinstalled on a non combustible surfa...

Page 5 - Floor Protector

6 Floor Protector Installation on a Concrete Floor An appliance mounted on a concrete floor does not require floor protection. Carpeting and any other combustible material shall not cover the Floor Protector. If a combustible surface is applied to the concrete floor, a clearance must be maintained e...

Page 7 - INSTRUCTIONS FOR FIRST BURN - CURING THE STOVE PAINT; BUILDING A FIRE

8 INSTRUCTIONS FOR FIRST BURN - CURING THE STOVE PAINT Your stove has been painted with the highest quality stove paint and has special break-in procedures. Theheat generated by the normal operation of the stove, will serve to harden the paint.Ventilate the house during the first three times the sto...

Other Vermont Casting Models

All Vermont Casting Other