Vermont Casting RHE42 - Manual

Table of Contents:

• Page 2 – Vermont Castings, Majestic Products RHE Natural Vent Insert; Table of Contents; Installation Instructions
• Page 3 – Insert Applications; Fig 1. Locating unit with zero clearance kit.; PLEASE REVIEW THE FOLLOWING CAREFULLY; Locating Your Gas Fireplace Insert with
• Page 4 – Fireplace Dimensions; Zero Clearance Kit
• Page 5 – Mantels; Fig. 2 Minimum mantel height above fireplace.; Combustion Air
• Page 6 – Input; Natural; Minimum Inlet Pressure; Certified To
• Page 7 – Installation of Remote Switch; Thread wire through gas inlet opening on the right; Right Side Installation
• Page 8 – Venting and Installation; Canadian Installations:; The Majestic gas inserts are designed for recessed; W A R N I N G
• Page 9 – Liner Installation; offset elbow to be installed.; Fig. 10 Remove flue collar plate and attach to flue collar.; Common Flue Installations; Test for Draft at This Location
• Page 10 – Fan Kit; Wait until the unit has warmed up sufficiently to; Fan Removal Instructions; Remove burner assembly and rear log support plate.
• Page 11 – Operating Instructions; General Glass Information; The use of substitute glass will void all product; Louvre Removal; Glass Cleaning; Lift up and unhook glass frame at the top.; Installation of Logs; Remove logs from packaging.
• Page 12 – Fig. 17 RHE25 log and lava rock placement.; Large Lava Rock Placement; Fig. 21 Flame adjustment knob for SIT Valve.; Flame Characteristics
• Page 13 – Fig. 24 Correct burner flame appearance for RHE42.; First Firing
• Page 14 – FOR YOUR SAFETY READ BEFORE LIGHTING; WHAT TO DO IF YOU SMELL GAS; To Turn Off Gas To Heater; Lighting And Operating Instructions; Lighting Instructions; Euro SIT
• Page 15 – SYMPTOM; Troubleshooting the Gas Control System; SIT NOVA 820 Millivolt Valve
• Page 16 – Eurosit 630 Gas Valve
• Page 17 – START; Honeywell Millivolt Valve
• Page 18 – Maintenance; Burner and Burner Compartment; Cleaning the Standing Pilot
• Page 20 – Description
• Page 22 – Optional Accessories; Ceramic Refractory; Remote Controls; Model; Left Side; A Trim Options for RHE25; Side View
• Page 23 – RHE25SSP & HE25LP Replacement Parts; Fig. 28 Install top and bottom brass trim.; For use with RHEDV25; Fig. 30 Slide bottom decorative plate under unit floor.
• Page 24 – HE25FP Replacement Parts; Key; Trim Window Top/Bottom; Trim Assembly
• Page 25 – Fig. 37 Attach magnets and brass trim to the steel frame.; HE25BTKP Replacement Parts; ALL repair parts will be available from your local dealer.
• Page 26 – A4 Riser Kits; Riser Trim Dimensions; B Trim Options for RHE32; For use with RHEDV32; Frame Assembly; Fig. 39 Attache left and right frame to frame top.; Fig. 40 Install trim channels and trim top deflector.
• Page 27 – Fig. 42 RHESSD and RHESLD trim assembly.; Frame Mounting; Front View
• Page 29 – B2 RHEBSL & RHEBXL Trims; RHEBSL; RHEBXL; Slide on the trim top channel and fasten it from the
• Page 30 – B3 RHEFA and RHEFP Trims; Install support window trim channel, top and bottom; RHEFA & RHEFP Trim Replacement Parts; Top Louvre Assembly
• Page 31 – HEBTKP; HECBTKP, HECBTKMB and HESBTKP
• Page 32 – Install the bay window by hanging it onto the lower; Fig. 55 Attach magnets and brass trim to the steel frame.
• Page 34 – Cast Surround and Flat Face; Length A; For use with RHEDV42
• Page 35 – Fig. 60 Position brass trim to with small end up.
• Page 36 – Fig. 61 Slide bottom decorative plate under unit floor.; RHE42FP Replacement Parts
• Page 37 – Fig. 68 Attach magnets and brass trim to the steel frame.; HE42BTKP Trim Replacement Parts
• Page 38 – IF WARRANTY SERVICE IS NEEDED...; ) DO NOT ATTEMPT TO DO ANY SERVICE WORK; LIMITED LIFETIME WARRANTY