Velodyne VRP-1000 - Manual - manualsarea.com

Page 2 - Caution; CAUTION; RISK OF ELECTRIC SHOCK

Caution To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside.Refer servicing to qualified service personnel. The lighting flash with arrowhead symbol is intended to alert the user to the presence of uninsulated"dangerous voltage" within the pr...

Page 3 - Félicitations

continued. . . 2 ☞ ☞ Congratulations! Congratulations on your purchase of a Velodyne Rear Port (VRP)subwoofer system. This system represents the state-of-the-ar t inhome audio reproduction and will provide you with years of listeningpleasure when properly cared for. Read and follow this instructionm...

Page 5 - Installation

continued. . . 4 ☞ ☞ monitors, as there is very little stray magnetism. Cer tain types oftelevisions are particularly sensitive to stray magnetic fields. Ifyour television produces distor ted colors after installing yoursubwoofer, simply increase the distance between your televisionand the subwoofer...

Page 7 - Figure 1. VRP Rear Panel Connections; Rear Panel Connections; Connect these jacks to the LINE OUT jacks of the amplifier.; VRP Series

continued. . . 6 ☞ ☞ Figure 1. VRP Rear Panel Connections Rear Panel Connections Figure 1 shows the connections on the rear panel of the VRP.Following are brief descriptions of the connections described inFigure 1. More detail of these connections can be found below: (1) SPEAKER LEVEL INPUT terminal...

Page 8 - Crossovers

7 ☞ ☞ (4) LOW-PASS CROSSOVER Use this knob to select the high-frequency range at which youwish to cut-off the signal to the subwoofer. (5) Power indicator Red: Unit is in standby mode. Green: Unit is in operation mode.(automatically turns to STANDBY mode if no signalfor 8 min.) (6) PHASE switch Sele...

Page 9 - Figure 2a. Line-Level Subwoofer Connection Diagram; SUBWOOFER REAR PANEL; AMPLIFIER

continued. . . 8 ☞ ☞ Figure 2a. Line-Level Subwoofer Connection Diagram SUBWOOFER REAR PANEL SUBWOOFEROUTPUT JACK FRONT REAR + R - - L + + R - - L + INPUT OUTPUT SPEAKER LEVEL + R - - L + LOW-PASSCROSSOVER 200Hz 80 Hz 50Hz PHASE 0 0 180 0 SUBWOOFER VOLUME MIN MAX VRP Series INPUT R L LFE IN RED : ST...

Page 10 - Figure 2b. Speaker-Level Subwoofer Connection Diagram

9 ☞ ☞ Figure 2b. Speaker-Level Subwoofer Connection Diagram SUBWOOFER REAR PANEL AMPLIFIER SUBWOOFEROUTPUT JACK RIGHT FRONT SPEAKER LEFT FRONT SPEAKER FRONT REAR + R - - L + + - - + + R - - L + INPUT OUTPUT SPEAKER LEVEL + R - - L + LOW-PASSCROSSOVER 200Hz 80 Hz 50Hz PHASE 0 0 180 0 SUBWOOFER VOLUME...

Page 13 - SPECIFICATIONS; Specifications are subject to change without notice.

12 SPECIFICATIONS VRP-1000 VRP-1200 Cabinet Design Bass-reflex with Bass-reflex with built-in power amplifier built-in power amplifier Frequency response 35 Hz - 140 Hz 29 Hz - 140 Hz (+/-3 dB) (+/-3 dB) Crossover frequency 50 - 200 Hz 50 - 200 Hz (variable) (variable) Max. output power 165 watts Dy...

Page 15 - LIMITED WARRANTY; TO OBTAIN SERVICE; Other Velodyne Subwoofer Products:; Deco System

LIMITED WARRANTY VELODYNE ACOUSTICS, Inc. (“VELODYNE”) warrants all powered subwoofers for a period oftwo years, and full range speakers for a period of five years. All VELODYNE products have awarranty from the date of purchase against defects in materials and workmanship subject to thefollowing con...

Page 16 - Printed on recycled paper.

“Not only was the little Velodyne the best small sub I’ve ever used,it was one of the very best subs I’ve used.” -John PotisSoundStage!, April 2002 Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax 408.779.9208 service fax www.velodyne.com Service e...

Velodyne VRP-1000 - Manual

Table of Contents:

Summary

Other Velodyne Models