Page 2 - TRADEMARKS
Package Contents: NexStar 2 External 3.5” HDD Enclosure: (NST-355U2, NST-355UF):• Driver CD • User Manual • NexStar 2 External 3.5“ HDD Enclosure • Power Adaptor • Power Cable • USB Cable • FireWire Cable (NST-355UF Only) • Screws • Vibration Dampeners NexStar 2 External 5.25” IDE Enclosure: (NST-52...
Page 3 - Table of Contents; Disconnecting the NexStar 2
Table of Contents 1 Table of Contents: 1. Introduction ...................................................................................................................................... pg. 22. Specifications/Features 2.1. NexStar 2 External 3.5” HDD Enclosure ......................................
Page 4 - Introduction
Introduction 2 1. Introduction: With its NexStar 2 series of enclosures, Vantec literally puts technology in your hands. Whether you’re looking for the ideal portable storage device or simply a convenient way to share hardware (hard drives, DVD burners, etc), the NexStar 2 series of enclosures is th...
Page 5 - Specifications/Features
Specifications/Features 3 2. Specifications/Features: 2.1. NexStar 2 External 3.5” HDD Enclosure: Specifications:• Interface: IDE to USB 2.0/FireWire (NST-355UF only) • Dimension: 210 X 135 X 40 mm Features:• Dampens Hard Drive vibration • Transfer Rates Up to 12Mbps With USB 1.1 • Transfer Rates Up...
Page 6 - System Requirements; For USB 2.0 speeds, the system must support USB 2.0 specifications
System Requirements 4 3. System Requirements: • Intel Pentium II 350MHz-compatible or Apple G3 processor and greater • Microsoft Windows 98SE/ME/2000/XP or Mac OS 8.6 and greater • USB-equipped system • For USB 2.0 speeds, the system must support USB 2.0 specifications • For FireWire, the system mus...
Page 7 - Parts Layout
Parts Layout 5 4. Parts Layout: 4.1. NexStar 2 External 3.5” HDD Enclosure: 4.2. NexStar 2 External 5.25” IDE Enclosure: IDE Cable Power Cable Audio Cable Left Vibration Dampener Right Vibration Dampener Right Mounting Bracket Left Mounting Bracket Power Cable IDE Cable
Page 8 - Installation: NexStar 2 External 3.5” HDD Enclosure; Preparing the hard drive:
Installation: NexStar 2 External 3.5” HDD Enclosure 6 5. Installation: 5.1. NexStar 2 External 3.5” HDD Enclosure: 5.1.1. Hardware Installation: Preparing the hard drive: 1) Set the hard drive jumpers to MASTER or SINGLE DRIVE ONLY. Please refer to the documentation included with your hard drive for...
Page 9 - Installing the hard drive in the NexStar 2:
Installation: NexStar 2 External 3.5” HDD Enclosure 7 Note: When removing the hard drive from the NexStar 2, be careful not to yank on the IDE cable or the power cable. To remove the IDE cable, grasp the cable between your thumb and index finger and gently pull at the sides until the cable comes loo...
Page 10 - Connecting the NexStar 2 to your computer:
Installation: NexStar 2 External 3.5” HDD Enclosure 8 Connecting the NexStar 2 to your computer: 1) Connect the appropriate interface cable between the NexStar 2 and your computer a. USB: Connect the type B connector to the NexStar 2 and the type A connector to an available USB 1.1/2.0 port on your ...
Page 11 - ) Sign on to the internet and go to the Windows 98 Support website:
Installation: NexStar 2 External 3.5” HDD Enclosure 9 Windows 98SE USB (NST-355UF – Combo Drive): 1) If this is the first time you are using the NexStar 2, unplug the NexStar 2 if you currently have it connected. If the [Add New Hardware Wizard] dialog box is open, close it. 2) Insert the driver CD ...
Page 12 - does not appear on the desktop, be sure to partition your hard drive.
Installation: NexStar 2 External 3.5” HDD Enclosure 10 Mac OS 9.0 or later - (NST-355U2, NST-355UF): 1) No drivers are necessary when using Mac OS 9.0 or later. If the hard drive does not appear on the desktop, be sure to partition your hard drive. Mac OS 8.6 - (NST-355U2, NST-355UF): 1) Unplug the ...
Page 13 - Installation: NexStar 2 External 5.25” IDE Enclosure; “R” Mounting Bracket
Installation: NexStar 2 External 5.25” IDE Enclosure 11 5.2. NexStar 2 External 5.25” IDE Enclosure: 5.2.1. Hardware Installation: Preparing the 5.25” device: 1) Set the jumpers on the device to MASTER (if applicable). Please refer to the documentation included with your 5.25” device for information...
Page 14 - Installing the 5.25” device in the NexStar 2:
Installation: NexStar 2 External 5.25” IDE Enclosure 12 Installing the 5.25” device in the NexStar 2: 1) Remove the top cover of the NexStar 2 (the side with the logo and text).2) Connect the IDE cable and power cable to the 5.25” device as pictured below. 3) Connect the audio cable to 5.25” device ...
Page 17 - your Windows 98SE Installation CD when installing the drivers.
Installation: NexStar 2 External 5.25” IDE Enclosure 15 6) Follow the directions on the installation page. Please note, you will need your Windows 98SE Installation CD when installing the drivers. 7) Repeat the steps listed under “Connecting the NexStar 2 to your computer.” Mac OS 9.0 or later - (NS...
Page 18 - Disconnecting the NexStar 2
Disconnecting the NexStar 2 16 6. Disconnecting the NexStar 2: 6.1. NexStar 2 External 3.5” HDD Enclosure: Windows 98SE/ME/XP/2000: 1) Make sure all operations using the hard drive within the NexStar 2 has ceased. 2) Close any windows and programs pertaining to the NexStar 2.3) If connected by USB, ...
Page 20 - Creating A New Partition; ) Once complete, you should now be able to see the drive in Windows
Creating A New Partition 18 7. Creating A New Partition: Note: Most hard drives should come with a CD that includes its installation program. If not, a download should be available on the manufacturers website. The best way to partition a new hard drive is by using the manufacturers program. However...
Page 21 - Initializing a Hard Drive:
Creating A New Partition 19 Mac OS X 10.x.x: Initializing a Hard Drive: If you are using a new hard drive, you may need to initialize it first. You can initialize your internal hard drive using a program called Drive Setup, which is on the Mac OS CD that came with your computer. 1. Start up your com...
Page 22 - Formatting a Hard Drive:
Creating A New Partition 20 Mac OS X 10.x.x: Formatting a Hard Drive: 1. Start the Disk Utility tool (under Applications)2. Select the new hard drive you are trying to install3. Click on the “Erase” tab4. Choose a volume format and assign a name to the new drive.5. Click on Erase. 6. Once complete, ...
Page 25 - Vantec Thermal Technologies
Warranty/Contact 23 9. Warranty: The NexStar 2 comes with a 1 year limited warranty (90 day parts). If your unit should become defective within that time frame, please go to http://www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are...
