Vantec UGT-IS100R - Manuals

Vantec UGT-IS100R – Manual in PDF format online.

Manuals:

Manual

Manual Vantec UGT-IS100R

Summary

Page 2 - Page 2

UGT-IS100R Page 2 Table of Contents 1. Features and Benefits ......................... 3 2. Bus Interface ........................................ 3 3. Ports ...................................................... 3 4. System Requirements ......................... 4 5. Package Contents ............

Page 3 - Page 3; Features and Benefits

UGT-IS100R Page 3 Features and Benefits z Compliant with one-lane 2.5Gb/s PCI Express specification z Compliant with Serial ATA 1.0 specification z Supports Serial ATA Generation 2 transfer rate of 3.0Gb/s z Supports Native Command Queue (NCQ) on SATA ports z Supports Hot Plug z Provides three ...

Page 4 - Page 4; System Requirements

UGT-IS100R Page 4 System Requirements z PCI Express-enabled system with one available PCI Express slot z Windows® 2000, XP/2003/Vista/2008/7 (32/64 bit) Package Contents z 1 x 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier z 1 x Driver CD z 1 x User’s Manual z 2 x ...

Page 5 - Page 5; Jumper Settings; JP

default, Port CON1 & CON2 are working. UGT-IS100R Page 5 Jumper Settings JP Description Active Port 1-2 close Enable SATA Port CON1 J1-J4 2-3 close Enable SATA Port

Page 6 - Page 6; Enable SATA Port; Hardware Installation

UGT-IS100R Page 6 CON3 1-2 close Enable SATA Port CON2 J5-J8 2-3 close Enable SATA Port CON4 Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCI-E slot. 4. To install the bard, ...

Page 7 - Page 7; RAID Arrays; Create RAID Disk Drive

UGT-IS100R Page 7 RAID Arrays RAID Arrays are setup in the 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier ’s BIOS. There are four configurations supported: RAID level/Type Configurations Number of disks needed RAID 0 Disk Striping 2 or 3 or 4 RAID 1 Disk Mirroring ...

Page 8 - Page 8

UGT-IS100R Page 8 “space” key to mark the selected disk, then press Enter . 6. Please use arrow keys ↑ and ↓ to select chunk size from 4K , 8K , 16K , 32K , 64K or 128K , then press Enter . 7. Input the RAID size, press Enter . 8. When asked Created RAID on the select HDD (Y/N)? , press Y to ac...

Page 9 - Page 9

UGT-IS100R Page 9 7. When asked Created RAID on the select HDD (Y/N)? , press Y to accept. 8. At the next screen select Save And Exit Setup , press Enter . When asked Save to disk &Exit (Y/N)? , press Y to exit the BIOS. CONCATENATION (JBOD) 1. As the BIOS boots press Ctrl+J when prompted t...

Page 11 - Delete RAID Disk Drive; Solve Mirror Conflict

UGT-IS100R Page 11 Delete RAID Disk Drive 1. As the BIOS boots press Ctrl+J when prompted to enter the RAID BIOS. 2. At the next screen select Delete RAID Disk Drive , press Enter . 3. Please use arrow keys ↑ and ↓ to select the array you want to delete, use the “space” key to mark the selected...

Page 13 - Driver Installation; or A New Installation; A new installation requires a floppy disk for the driver; Enter

UGT-IS100R Page 13 F up. During this (POST) process, the BIOS will show up and indicate the devices attached to it. Driver Installation For Windows® 2000, XP and Server 2003 or A New Installation A new installation requires a floppy disk for the driver installation. To make this floppy disk, co...

Page 14 - For An Existing Installation; Start; For A New Installation

UGT-IS100R Page 14 on-screen instructions to complete the Windows installation. For An Existing Installation 1. Setup the RAID Array prior to driver installation and boot up to Windows. 2. Please insert the CD driver bound with 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port M...

Page 16 - For Windows® Vista; Load Driver

UGT-IS100R Page 16 F installation. 6. Restart Windows to complete the installation. For Windows® Vista or A New Installation A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the “ UGT-IS100R\2000_XP_2003_Vista\Floppy32 ” folde...

Page 17 - For Windows® Vista-x64

UGT-IS100R Page 17 F 1. Setup the RAID Array prior to driver installation and boot up to Windows. 2. Please insert the CD driver bound with 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier into your CD-ROM Drive. 3. At the Windows desktop, click Start , then Run . 4....

Page 18 - or An Existing Installation

UGT-IS100R Page 18 F 3. At the Windows Setup screen, press Load Driver to install the RAID driver. 4. Insert the floppy disk, please select JMicron JMB36X Controller (A:\jRAID_f.inf) , then press Next . (Change A:\ to match your floppy drive letter) 5. Follow the on-screen instructions to compl...

Page 19 - For New Installation

For Windows® Server 2008/7 (32-bit) For New Installation 1. Setup the RAID Array prior to Windows installation. 2. Follow Microsoft’s Windows installation procedure. 3. At the Windows Setup screen, press Load Driver to install the RAID driver. 4. Please insert the CD driver bound with 4+1 SATA II 30...

Page 20 - or New Installation

UGT-IS100R Page 20 F into your CD-ROM Drive. 3. At the Windows desktop, click Start , then Run . 4. Type D:\ UGT-IS100R\2000_XP_2003_Vista\setup.exe , click OK . (Change D:\ to match your CD-ROM drive letter) 5. Follow the on-screen instructions to complete the installation. 6. Restart Windows ...

Page 21 - To Verify Driver Installation

7. Follow the on-screen instructions to complete the installation. UGT-IS100R Page 21 For An Existing Installation 1. Setup the RAID Array prior to driver installation and boot up to Windows. 2. Please insert the CD driver bound with 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & ...

Page 22 - -JMicron JMB36X Controller; Storage controllers:; should be displayed

UGT-IS100R Page 22 Controller: -JMicron JMB36X Controller should be displayed Windows® Vista: Double click Storage controllers: -JMicron JMB36X Controller should be displayed